Get-NetEventPacketCaptureProvider
Get-NetEventPacketCaptureProvider
Displays a Remote Packet Capture provider.
構文
Parameter Set: BySessionName
Get-NetEventPacketCaptureProvider [[-SessionName] <String[]> ] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: BySessionOfTheProvider
Get-NetEventPacketCaptureProvider [-AssociatedEventSession <CimInstance> ] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: ByTargetOfTheProvider
Get-NetEventPacketCaptureProvider [-AssociatedCaptureTarget <CimInstance> ] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
詳細説明
The Get-NetEventPacketCaptureProvider cmdlet displays a Remote Packet Capture provider.
パラメーター
-AssociatedCaptureTarget<CimInstance>
Specifies the associated capture target as a CIM object. The capture target is one of the three following objects:
-- MSFT_NetEventNetworkAdapter
-- MSFT_NetEventVmNetworkAdapter
-- MSFT_NetEventVmSwitch
To obtain a capture target, use the Get-NetEventNetworkAdapter cmdlet, the Get-NetEventVmNetworkAdapter cmdlet, or the Get-NetEventVmSwitch cmdlet.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-AssociatedEventSession<CimInstance>
Specifies the associated network event session, as a CIM object. To obtain the network event session, use the Get-NetEventSession cmdlet.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-SessionName<String[]>
Specifies the name of the session associated with the packet capture provider.
エイリアス |
none |
必須? |
false |
位置は? |
1 |
既定値 |
none |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
<WorkflowParameters>
このコマンドレットは次のワークフロー共通パラメーターをサポートします。-PSParameterCollection、-PSComputerName、-PSCredential、-PSConnectionRetryCount、-PSConnectionRetryIntervalSec、-PSRunningTimeoutSec、-PSElapsedTimeoutSec、-PSPersist、-PSAuthentication、-PSAuthenticationLevel、-PSApplicationName、-PSPort、-PSUseSSL、-PSConfigurationName、-PSConnectionURI、-PSAllowRedirection、-PSSessionOption、-PSCertificateThumbprint、-PSPrivateMetadata、-AsJob、-JobName、–InputObject。詳細については、以下を参照してください。 about_WorkflowCommonParameters。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
例
Example 1: Display a packet capture provider
This command displays a packet capture provider for a session named Session01
PS C:\> Get-NetEventPacketCaptureProvider -SessionName "Session01"
関連トピック
Add-NetEventPacketCaptureProvider
Remove-NetEventPacketCaptureProvider