Remove-NetIPAddress
Remove-NetIPAddress
Removes an IP address and its configuration.
構文
Parameter Set: Query (cdxml)
Remove-NetIPAddress [[-IPAddress] <String[]> ] [-AddressFamily <AddressFamily[]> ] [-AddressState <AddressState[]> ] [-CimSession <CimSession[]> ] [-DefaultGateway <String> ] [-IncludeAllCompartments] [-InterfaceAlias <String[]> ] [-InterfaceIndex <UInt32[]> ] [-PassThru] [-PolicyStore <String> ] [-PreferredLifetime <TimeSpan[]> ] [-PrefixLength <Byte[]> ] [-PrefixOrigin <PrefixOrigin[]> ] [-SkipAsSource <Boolean[]> ] [-SuffixOrigin <SuffixOrigin[]> ] [-ThrottleLimit <Int32> ] [-Type <Type[]> ] [-ValidLifetime <TimeSpan[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: InputObject (cdxml)
Remove-NetIPAddress [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
詳細説明
The Remove-NetIPAddress cmdlet removes an IP address and its configuration. To remove a specific IP address object, use the IPv4 Address parameter or IPv6 Address parameter. If you do not specify an IPv4 or IPv6 address, the cmdlet will remove all IP addresses that match.
パラメーター
-AddressFamily<AddressFamily[]>
Specifies an array of IP address families. The cmdlet removes the IP address that matches the families. このパラメーターに指定できる値は、次のとおりです。
-- IPv4
-- IPv6
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-AddressState<AddressState[]>
Specifies an array of duplicate address detection (DAD) state values for the IP address. このパラメーターに指定できる値は、次のとおりです。
-- Invalid. IP address configuration information for addresses that are not valid and will not be used.
-- Tentative. IP address configuration information for addresses that are not used for communication, as the uniqueness of those IP addresses is being verified.
-- Duplicate. IP address configuration information for addresses for which a duplicate IP address has been detected and the current IP address will not be used.
-- Deprecated. IP address configuration information for addresses that will no longer be used to establish new connections, but will continue to be used with existing connections.
-- Preferred. IP address configuration information for addresses that are valid and available for use.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。
Aliases |
Session |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-DefaultGateway<String>
Specifies the IPv4 address or IPv6 address of the default gateway for the host. Default gateways provide a default route for TCP/IP hosts to use when communicating with other hosts on remote networks.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-IncludeAllCompartments
Indicates that the cmdlet includes addresses from all configured network compartments. If you do not specify this parameter, the cmdlet removes only addresses in the default network compartment.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-InterfaceAlias<String[]>
Specifies an array of aliases of network interfaces. The cmdlet removes IP addresses that match the aliases.
Aliases |
ifAlias |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
True (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-InterfaceIndex<UInt32[]>
Specifies an array of indexes of network interfaces. The cmdlet removes IP addresses that match the indexes.
Aliases |
ifIndex |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
True (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-IPAddress<String[]>
Specifies an array of IPv4 or IPv6 addresses.
Aliases |
LocalAddress |
必須/オプション |
false |
位置 |
1 |
既定値 |
none |
パイプライン入力の受け入れ |
True (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットから出力は生成されません。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-PolicyStore<String>
Specifies a PolicyStore value. このパラメーターに指定できる値は、次のとおりです。
-- ActiveStore. The IP address information is valid.
-- PersistentStore. The computer saves IP address information across restarts. When the computer restarts, it copies the saved settings to the ActiveStore.
The default value is ActiveStore.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-PreferredLifetime<TimeSpan[]>
Specifies an array of values of preferred lifetimes, as TimeSpan objects, for an IP address. To obtain a TimeSpan object, use the New-TimeSpan cmdlet.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-PrefixLength<Byte[]>
Specifies an array of prefix lengths. This parameter defines the local subnet size, and is also known as a subnet mask.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-PrefixOrigin<PrefixOrigin[]>
Specifies an array of origins of address prefixes. IP addresses are divided into two parts, the prefix and the suffix. The address prefix identifies the network portion of an IP address, and the address suffix identifies the host portion. このパラメーターに指定できる値は、次のとおりです。
-- Manual. The IP address prefix was manually specified.
-- WellKnown. The IP address prefix is from a well-known source.
-- DHCP. The IP address prefix was provided by DHCP settings.
-- RouterAdvertisement. The IP address prefix was obtained through a router advertisement (RA).
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-SkipAsSource<Boolean[]>
Indicates whether an address is a primary IP address. This parameter identifies the primary IP address for outgoing traffic in a multiple IP address scenario. If this parameter is set to True, the addresses are not used for outgoing traffic and are not registered in DNS.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-SuffixOrigin<SuffixOrigin[]>
Specifies an array of origins of address suffixes. IP addresses are divided into two parts, the prefix and the suffix. The address prefix identifies the network portion of an IP address, and the address suffix identifies the host portion. このパラメーターに指定できる値は、次のとおりです。
-- Manual. The IP address prefix was manually specified.
-- WellKnown. The IP address suffix is from a well-known source.
-- DHCP. The IP address suffix was provided by DHCP settings.
-- Link. The IP address suffix was obtained from the link-layer address.
-- Random. The IP address suffix was obtained from a random source.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ThrottleLimit<Int32>
コマンドレットを実行する際に確立できる同時実行操作の最大数を指定します。このパラメーターを省略するか、値 0
を入力した場合、コンピューター上で実行されている CIM コマンドレットの数に基づいて、コマンドレットに最適なスロットル制限が Windows PowerShell® によって計算されます。スロットル制限は、セッションやコンピューターではなく、現在のコマンドレットにのみ適用されます。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Type<Type[]>
Specifies an array of IP address types. このパラメーターに指定できる値は、次のとおりです。
-- Unicast
-- Anycast
The default value is Unicast.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ValidLifetime<TimeSpan[]>
Specifies an array of values of valid lifetimes, as TimeSpan objects, for an IP address. To obtain a TimeSpan object, use the New-TimeSpan cmdlet.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Confirm
コマンドレットを実行する前に確認メッセージを表示します。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-WhatIf
コマンドレットが実行された場合に何が起きるのかを示します。コマンドレットは実行されません。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
<CommonParameters>
このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。
<WorkflowParameters>
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIPAddress
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。基になる WMI オブジェクトの名前空間とクラス名は、シャープ記号 (#
) に続くパスで指定されます。
出力
出力型は、コマンドレットが出力するオブジェクトの型です。
- None
使用例
Example 1: Remove an IP address
This command adds a new IP address.
PS C:\> New-NetIPAddress –InterfaceIndex 12 –IPAddress 192.168.0.1
This command removes the IP address created by the previous command.
PS C:\> Remove-NetIPAddress –IPAddress 192.168.0.1
Example 2: Remove an IP address using a pipeline
This command removes all of the IP addresses with the address 192.168.0.1.
PS C:\> Get-NetIPAddress –IPAddress 192.168.0.1 | Remove-NetIPAddress
Example 3: Remove IP addresses by prefix origin
This command removes all of the IP addresses that have a manually-configured prefix origin.
PS C:\> Remove-NetIPAddress –PrefixOrigin Manual