Edit

ipxroute

  • Article

Applies to: Windows Server 2022, Windows Server 2019, Windows Server 2016, Windows Server 2012 R2, Windows Server 2012

Displays and modifies information about the routing tables used by the IPX protocol. Used without parameters, ipxroute displays the default settings for packets that are sent to unknown, broadcast, and multicast addresses.

Syntax

ipxroute servers [/type=x]
ipxroute ripout <network>
ipxroute resolve {guid | name} {GUID | <adaptername>}
ipxroute board= N [def] [gbr] [mbr] [remove=xxxxxxxxxxxx]
ipxroute config

Parameters

Parameter Description
servers[/type=x] Displays the Service Access Point (SAP) table for the specified server type. x must be an integer. For example, /type=4 displays all file servers. If you don't specify /type, ipxroute servers displays all types of servers, listing them by server name.
resolve{GUID | name} {GUID | adaptername} Resolves the name of the GUID to its friendly name, or the friendly name to its GUID.
board= n Specifies the network adapter for which to query or set parameters.
def Sends packets to the ALL ROUTES broadcast. If a packet is transmitted to a unique Media Access Card (MAC) address that is not in the source routing table, ipxroute sends the packet to the SINGLE ROUTES broadcast by default.
gbr Sends packets to the ALL ROUTES broadcast. If a packet is transmitted to the broadcast address (FFFFFFFFFFFF), ipxroute sends the packet to the SINGLE ROUTES broadcast by default.
mbr Sends packets to the ALL ROUTES broadcast. If a packet is transmitted to a multicast address (C000xxxxxxxx), ipxroute sends the packet to the SINGLE ROUTES broadcast by default.
remove=xxxxxxxxxxxx removes the given node address from the source routing table.
config Displays information about all of the bindings for which IPX is configured.
/? Displays help at the command prompt.

Examples

To display the network segments that the workstation is attached to, the workstation node address, and frame type being used, type:

ipxroute config