Outlook 2010에서 사용자 계정 자동 구성 계획

 

적용 대상: Office 2010

마지막으로 수정된 항목: 2016-11-29

자동 검색 및 공통 설정 검색은 Microsoft Outlook 2010에서 사용자 계정을 자동으로 구성할 수 있는 두 가지 검색 메커니즘입니다.

이 문서의 내용


  • 개요


  • DNS에서 자동 검색 사용


  • 자동 검색 트랜잭션 요약


  • 자동 검색 XML 스키마


  • 일반 설정 검색

개요

Microsoft Office Outlook 2007의 경우처럼 Outlook 2010에는 사용자 계정을 자동으로 구성하는 기능이 포함되어 있습니다. Outlook 2010에서는 두 가지 검색 메커니즘인 자동 검색 및 일반 설정 검색 중 하나를 사용하여 계정을 자동으로 구성합니다.

자동 검색은 ISP(인터넷 서비스 공급자) 또는 회사의 관리자가 구성하거나 서비스에 의해 공적으로 생성될 수 있는(예: Microsoft Exchange Server 2007 또는 Microsoft Exchange Server 2010의 클라이언트 액세스 서버 역할) 표준 기반의 XML 파일입니다. 이 방법은 최적의 성능을 제공하므로 설정 검색을 위해 권장되는 메커니즘입니다. 또한 설정이 메일 서버 관리자에 의해 명시적이고 의도적으로 정의되므로 클라이언트 컴퓨터에서 구성 오류가 발생할 가능성이 최소화됩니다.

일반 설정 검색은 구성 효율이 떨어지고 덜 정교하지만 일반적인 설정에 따라 전 세계 대부분의 메일 서버를 구성합니다. 먼저 암호화된 연결이 시도됩니다. 이러한 연결이 실패할 경우 암호화되지 않은 연결을 시도한 다음, 암호화 없이 동일한 서버에 다시 연결해보라는 메시지가 표시됩니다. 오늘날 많은 ISP는 암호화를 요구하지 않지만 사용자가 암호화를 사용하여 해당 계정을 구성할 수 있도록 설정되어 있습니다.

Exchange Server 2007에 대한 자동 검색 서비스를 배포하고 관리하는 방법에 대한 자세한 내용은 자동 검색 서비스 개요: Exchange 2007 도움말(https://go.microsoft.com/fwlink/p/?linkId=183290)을 참조하세요. Exchange Server 2010의 경우 자동 검색 서비스 이해: Exchange 2010 도움말(https://go.microsoft.com/fwlink/p/?linkId=183289)을 참조하세요.

DNS에서 자동 검색 사용

Outlook 2010의 자동 검색은 사용자가 제공하는 도메인 이름에 따라 두 위치 중 하나에 배치되는 XML 파일입니다. 인터넷에서 검색할 경우 자동 검색은 DNS(Domain Name System)를 통해 XML 파일을 찾습니다. XML 파일 위치는 사용자가 제공하는 전자 메일 주소를 기반으로 합니다. 예를 들어 사용자의 전자 메일 주소로 barbara@contoso.com을 입력하면 Outlook 2010은 다음 위치에서 다음 순서대로 XML 파일을 찾습니다.

  1. https://contoso.com/autodiscover/autodiscover.xml

  2. https://autodiscover.contoso.com/autodiscover/autodiscover.xml

회사의 루트 도메인에 웹 사이트가 있는 경우(예: contoso.com) 두 번째 옵션(자동 검색 "호스트 (A) 리소스 레코드" 솔루션)을 사용하여 웹 서버를 실행하고 별도의 서버에서 자동 검색 파일 또는 서비스를 실행할 수 있습니다. 소규모 기업의 경우 별도 DNS 레코드가 있는 추가 관리를 무시할 수 있으며 단일 서버에서 웹 사이트와 자동 검색 서비스(예: 앞서 설명된 옵션 1)를 실행할 수 있습니다.

SSL(Secure Sockets Layer)을 사용하여 연결을 설정할 수 있으며 유효한 SSL 인증서가 있어야 합니다. 회사 또는 ISP(인터넷 서비스 공급자)가 메일 서버에 대해 암호화된 액세스만 제공하도록 선택할 수 있으므로 SSL이 필요합니다. 이 시나리오에서 비 SSL 연결이 허용될 경우 Outlook 2010이 비 SSL 위치를 먼저 검사하거나 비 SSL 위치로의 장애 조치(failover)를 허용하고 사용자가 중간자 개입 공격과 같은 취약한 보안 상황에서 전자 메일 주소 및 암호를 입력하면 Outlook 2010의 자동 구성 서비스가 연결 체인에서 가장 약한 링크가 되어 보안을 약화시킬 수 있습니다. 암호화된 연결을 사용하지 않는 경우 자동 구성 서비스는 암호화되지 않은 웹 사이트가 메일 서버 설정을 구성할 수 있도록 하며, 사용자 이름 및 암호를 사용하여 암호화되지 않은 사이트에서 인증을 받도록 할 수 있습니다. 대신 보안 구성 루틴을 필요로 하는 기업 및 ISP와의 호환성을 유지하기 위해 자동 검색 프로토콜에 SSL이 필요합니다.

그러나 회사 또는 ISP가 여러 전자 메일 도메인을 호스트하도록 선택하면 Outlook 2010은 HTTP 리디렉션 또는 설정을 저장하는 보안 웹 사이트에 대해 암호화되지 않은 DNS 서비스(SRV) 리소스 레코드(이 DNS SRV 레코드 조회 기능은 Office Outlook 2007 서비스 팩 1 이상 버전에 포함되어 있음)를 따를 수 있습니다. 예를 들어 contoso.com이 호스트된 전자 메일 도메인이고 호스팅 서비스가 hoster.com에서 자동 검색 파일을 실행한다고 가정합니다. 이 경우 호스팅 회사에서 autodiscover 접두사를 사용하여 Outlook 2010의 경로를 자동 검색 설정을 포함하는 보안 사이트로 지정할 수 있습니다.

두 예제에서 Outlook 2010에는 서버 설정을 위해 autodiscover.hoster.com으로 리디렉션되고 있음을 나타내는 경고 대화 상자가 표시됩니다. 이 대화 상자에는 리디렉션을 허용하여 리디렉션 사이트(이 예제에서는 autodiscover.hoster.com)에 대한 후속 메시지를 무시할 수 있도록 하는 옵션이 제공됩니다.

자동 검색 프로토콜 정보

SCP(서비스 연결 지점)가 구성된 도메인 환경에서는 SCP 조회가 먼저 수행됩니다. 그렇지 않으면 첫 번째 연결 시도는 항상 domain에 대한 HTTPS POST 동사입니다. 여기서 사용자는 전자 메일 주소 e-mail@domain을 입력했습니다. 설정이 성공적으로 검색되면 추가 네트워크 호출은 수행되지 않습니다. 설정이 검색되지 않으면 autodiscover.domain에 대해 HTTPS POST 동사가 수행됩니다. 이 사이트에서 설정이 검색되지 않으면 최종 HTTP GET 및 DNS SRV 레코드 조회는 autodiscover.domain 사이트에서만 수행됩니다. 이 HTTP GET 및 DNS SRV 레코드 조회는 항상 보안 사이트로만 리디렉션될 수 있습니다. (설정된 HTTP 위치에 있는 경우 연결이 암호화되지 않았으므로 Outlook 2010은 구성되지 않습니다.)

Outlook 2010에서는 유형에 관계없이 최대 10번의 리디렉션을 수행할 수 있습니다. 즉, HTTPS POST 리디렉션을 수행하거나, HTTP GET 리디렉션을 수행하거나, 이 문서 뒷부분에 자세히 설명되어 있는 자동 검색 리디렉션 XML 스키마 태그를 사용할 수 있습니다. 10번의 리디렉션에서도 설정을 가져올 수 없으면 설정 검색이 실패합니다.

정적 XML 및 웹 서비스 XML

Outlook 2010에서 동적 웹 서비스(Exchange 2007 및 Exchange Server 2010의 클라이언트 액세스 서버 역할)로 요청을 실행할 수 있도록 POST 동사가 사용됩니다. 그러나 정적 XML 파일로 충분하거나 자동 검색 웹 서비스를 실행하고 있지 않는 경우 사용자 지정된 405에서 반환된 XML 응답(POST 동사가 지원되지 않음)은 Outlook 2010에서 사용되는 구성 XML로도 작동합니다.

로컬로 자동 검색 사용

서버 설정을 정의하는 로컬 XML 파일을 찾도록 컴퓨터의 레지스트리를 구성할 수 있습니다. 그러나 라이브 서버에 호스트된 설정을 쉽게 업데이트할 수 있으므로 이러한 방식이 강력히 권장됩니다. 테스트용으로 레지스트리에 항목을 추가하면 강제로 Outlook 2010에서 로컬 XML 파일을 사용하여 서버에 구성되지 않은 전자 메일 도메인을 구성할 수 있다. 서버는 더 나은 보안 및 구성 제어를 위해 로컬 XML을 재정의합니다.

예를 들어 로컬 XML 파일의 contoso.com 전자 메일 주소 설정을 제공하려면 다음 레지스트리 값을 구성할 수 있습니다.

[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Autodiscover] "contoso.com"="%PROGRAMFILES%\Microsoft Office\Office14\contoso.xml"

이 예제에서 XML 설정 파일은 %PROGRAMFILES%\Microsoft Office\Office14\contoso.xml에 있습니다. 샘플 XML 설정 파일은 이 문서의 뒷부분에 제공됩니다.

XML 설정에 대한 우선 순위

Outlook 2010에서는 자동 검색 XML 설정 파일에 서버가 정의된 순서에 따라 서버 유형을 구성합니다. 예를 들어 사용자가 POP3 프로토콜과 IMAP 프로토콜을 둘 다 사용하여 로그온할 수 있도록 메일 서비스 공급자가 허용하지만 사용자는 POP3 프로토콜을 사용하는 것을 선호할 경우 POP3 설정이 자동 검색 파일 맨 처음에 나타납니다.

자동 검색 트랜잭션 요약

Outlook 2010의 자동 검색 설정 검색 작업 순서는 다음과 같이 요약됩니다.

  1. 컴퓨터가 도메인에 가입되어 있는 경우 Active Directory 디렉터리 서비스에서 전자 메일 주소를 자동으로 검색합니다.

  2. Exchange Server 컴퓨터의 이름을 검색하고 찾으면 나중에 해당 이름을 저장합니다.

  3. 사용자의 전자 메일 주소에 해당하는 SCP(서비스 연결 지점) 개체나 SCP 포인터 개체를 찾고, 연결할 올바른 자동 검색 서버를 찾습니다. 그런 다음 서버에 연결하고 설정을 검색합니다.

  4. 이전 단계가 실패하면 자동 검색 XML의 DNS 검색을 시도하세요(10번 리디렉션 허용).

    1. HTTPS POST: https://domain/autodiscover/autodiscover.xml

    2. HTTPS POST: https://autodiscover.domain/autodiscover/autodiscover.xml

    3. 로컬 XML 검색을 시도하고 해당 XML이 존재하는 경우 로컬 컴퓨터에서 찾은 XML을 사용합니다.

    4. HTTP GET: http://autodiscover.domain/autodiscover/autodiscover.xml(리디렉션만 수행하고 설정을 가져오지 못함)

    5. DNS SRV 조회: _autodiscover._tcp.domain(SRV 리소스 레코드가 가리키는 리디렉션만 수행)

  5. 이전 단계가 실패하지만 Exchange Server 컴퓨터의 이름을 2단계에서 찾은 경우 Exchange Server 컴퓨터의 이름에 따라 Exchange 계정을 구성합니다.

  6. 이전 단계를 적용할 수 없는 경우 이 문서의 뒷부분에 나오는 일반 설정 검색에 설명된 대로 일반 설정 검색을 시도합니다.

자동 검색 XML 스키마

Outlook 2010의 자동 검색용 XML 스키마는 다음 섹션에 설명되어 있습니다.

Outlook에서 보낸 POST 요청

는 XML 설정을 검색하여 전자 메일 계정을 구성할 경우 Outlook 2010은 항상 POST 동사를 사용합니다. HTTP POST는 다음 코드 예제에 표시됩니다.

<!-- REQUEST TO SERVER. In HTTP POST DATA -->
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns="https://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006">
<Request>
<AcceptableResponseSchema>https://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a</AcceptableResponseSchema>

<!-- EMailAddress: Optional
This tag indicates the user's email address.
-->
<EMailAddress>JohnDoe@sample.com</EMailAddress>
</Request>
</Autodiscover>

XML 응답 스키마

서버는 여러 가지 방법으로 Outlook 2010 POST에 응답할 수 있습니다. 서버 이름이 모든 사용자에 대해 동일한 ISP(인터넷 서비스 공급자)가 제공하는 POP3 서비스와 같은 정적 XML 파일로 충분한 경우 XML 콘텐츠가 있는 사용자 지정된 405 POST 오류 메시지로 충분합니다. 자동 검색 서비스를 실행 중인 경우 이전 섹션에 표시된 사용자의 POST에 따라 응답 수가 동적으로 계산됩니다. 그렇지만 응답 스키마는 다음 코드 예제에 표시되는 것과 같습니다.

<!-- RESPONSE FROM THE SERVER -->
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns="https://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<!-- Response: Required
This tag serves as an indication that the retrieved XML is an Autodiscovery Response
-->
<Response xmlns="https://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<!-- User: Optional
This tag gives user-specific information.  Autodiscover must be UTF-8 encoded.
-->
<User>
<!-- DisplayName: Optional
The server may have a good formal display name.  The client can decide to accept it or change it.  This will save the user time in the default case.
-->
<DisplayName>John Doe</DisplayName>
</User>

<!-- Account: Required
This tag specifies the type of account, such as Email vs Newsgroups, vs SIP server, etc.
-->
<Account>
<!-- AccountType: Required
This value indicates the type of the account.
VALUES:
email: The values under this Account tag indicate configuration settings for an email server.
nntp: The values under this Account tag indicate configuration settings for a NNTP server. (not used by Outlook 2007)
-->
<AccountType>email | nntp</AccountType>

<!-- Action: Required
This value indicates if the goal of this account results is to provide the settings or redirect to another web server that can provide results.
VALUES:
redirectUrl: If this value is specified, then the URL tag will specify the http: or https: URL containing the Autodiscover results to be used.  In order to prevent the server from being able to send the client into an infinite loop, the client should stop redirecting after 10 redirects.
redirectAddr: If this value is specified, then the XML tag will specify the e-mail address that Outlook should use to execute Autodiscover again.  In other words, the server is telling the client that the e-mail address the client should really be using for Autodiscover is not the one that was posted, but the one specified in this tag. 
settings: If this value is specified, then the XML will contain the settings needed to configure the account.  The settings will primarily be under the PROTOCOL tag.
-->
<Action>redirectUrl | redirectAddr | settings</Action>

<!-- RedirectUrl: Required if ACTION tag has value of 'redirectUrl'. Otherwise this tag must not exist.
The value will be a https: URL that the client should use to obtain the Autodiscover settings or a http: URL that the client should use for further redirection.
-->
<RedirectUrl>redirect.URL</RedirectUrl>

<!-- RedirectAddr: Required if ACTION tag has value of 'redirectAddr'. Otherwise this tag must not exist.
The value will be an email address that the client should use to rediscover settings using the Autodiscover protocol.
-->
<RedirectAddr>email@address</RedirectAddr>

<!-- Image: Optional
This is a JPG picture to brand the ISP configuration experience with. The client can choose whether or not they download this picture to display. (not used by Outlook 2007)
-->
<Image>http://path.to.image.com/image.jpg</Image>

<!-- ServiceHome: Optional
This is a link to the ISP's Home Page. The client can choose whether or not they expose this link to the user. (not used by Outlook 2007)
-->
<ServiceHome>http://web.page.com</ServiceHome>

<!-- Protocol: Required if ACTION tag has value of 'settings'. Otherwise, this tag must not exist.
The tag encloses the specifications for a single account type.  The list of Protocol tags are in order of preference of the server.  The client may over ride the preference.
-->
<Protocol>
<!-- TYPE: Required.
The value here specifies what kind of mail account is being configured.
POP3: The protocol to connect to this server is POP3. Only applicable for AccountType=email.
SMTP: The protocol to connect to this server is SMTP. Only applicable for AccountType=email.
IMAP: The protocol to connect to this server is IMAP. Only applicable for AccountType=email.
DAV: The protocol to connect to this server is DAV. Only applicable for AccountType=email.
WEB: Email is accessed from a web browser using an URL from the SERVER tag. Only applicable for AccountType=email. (not used by Outlook 2007)
NNTP: The protocol to connect to this server is NNTP. Only applicable for AccountType=nntp. (not used by Outlook 2007)
-->
<Type>POP3 | SMTP | IMAP | DAV | WEB | NNTP</Type>

<!-- ExpirationDate: Optional.
The value here specifies the last date which these settings should be used. After that date, the settings should be rediscovered via Autodiscover again. If no value is specified, the default will be no expiration.
-->
<ExpirationDate>YYYYMMDD</ExpirationDate>

<!-- TTL: Optional.
The value here specifies the time to live in hours that these settings are valid for. After that time has elapsed (from the time the settings were retrieved), the settings should be rediscovered via Autodiscovery again. A value of 0 indicates that no rediscovery will be required. If no value is specified, the default will be a TTL of 1 hour.
-->
<TTL>168</TTL>

<!-- Server: Required.
The value here specifies the name of the mail server corresponding to the server type specified above.
For protocols such as POP3, SMTP, IMAP, or NNTP, this value will be either a hostname or an IP address.
For protocols such as DAV or WEB, this will be an URL.
-->
<Server>mail.contoso.com</Server> <!--IP Addr or DNS name of server-->

<!-- Port: Optional.
The value specifies the Port number to use.  If no value is specified, the default settings will be used depending on the mail server type.  This value is not used if the SERVER tag contains an URL.
-->
<Port>110</Port>

<!-- LoginName: Optional.
This value specifies the user's login.  If no value is specified, the default will be set to the string preceding the '@' in the email address.  If the Login name contains a domain, the format should be <Username>@<Domain>.  Such as JoeUser@SalesDomain.
-->
<LoginName>johndoe</LoginName>

<!-- DomainRequired: Optional.  Default is off.
If this value is true, then a domain is required during authentication.  If the domain is not specified in the LOGINNAME tag, or the LOGINNAME tag was not specified, the user will need to enter the domain before authentication will succeed.
-->
<DomainRequired>on | off</DomainRequired>

<!-- DomainName: Optional.
This value specifies the user's domain. If no value is specified, the default authentication will be to use the e-mail address as a UPN format <Username>@<Domain>. Such as JoeUser@SalesDomain.
-->
<DomainName></DomainName>

<!-- SPA: (Secure Password Authentication) Optional.
This value specifies whether or not secure password authentication is needed.
If unspecified, the default is set to on.
-->
<SPA>on | off</SPA>

<!-- SSL: Optional.
This value specifies whether secure login is needed.
If unspecified, the default is set to on.
-->
<SSL>on | off</SSL>

<!-- AuthRequired: Optional.
This value specifies whether authentication is needed (password).
If unspecified, the default is set to on.
-->
<AuthRequired>on | off</AuthRequired> <!-- Optional: Is Authentication required? -->

<!-- UsePOPAuth: Optional.
This value can only be used for SMTP types.
If specified, then the authentication information provided for the POP3 type account will also be used for SMTP.
-->
<UsePOPAuth>on | off</UsePOPAuth>

<!-- SMTPLast: Optional.  Default is off.
If this value is true, then the SMTP server requires that email be downloaded before sending email via the SMTP server.  This is often required because the SMTP server verifies that the authentication succeeded when downloading email.
-->
<SMTPLast>on | off</SMTPLast>
</Protocol>
</Account>
</Response>
</Autodiscover>

샘플 XML 응답

반환되는 XML 응답은 ISP에서 정의한 구성에 따라 달라집니다.

POP3 및 SMTP 서비스를 사용하는 ISP

다음 XML 파일은 https://contoso.com/autodiscover/autodiscover.xml 또는 https://autodiscover.contoso.com/autodiscover/autodiscover.xml에서 사용자 지정 405 오류 응답으로 구성됩니다.

<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns="https://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="https://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<Protocol>
<Type>POP3</Type>
<Server>mail.contoso.com</Server>
<Port>995</Port>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<SSL>on</SSL>
<AuthRequired>on</AuthRequired>
</Protocol>
<Protocol>
<Type>SMTP</Type>
<Server>mail.contoso.com</Server>
<Port>587</Port>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<SSL>on</SSL>
<AuthRequired>on</AuthRequired>
<UsePOPAuth>on</UsePOPAuth>
<SMTPLast>on</SMTPLast>
</Protocol>
</Account>
</Response>
</Autodiscover>

클라이언트에 POP3이 기본적으로 사용되는 POP3, IMAP 및 SMTP 서비스를 제공하는 ISP

다음 XML 파일은 이전 섹션에 설명된 그대로 구성되어야 합니다.

<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns="https://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="https://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<Protocol>
<Type>POP3</Type>
<Server>mail.contoso.com</Server>
<Port>995</Port>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<SSL>on</SSL>
<AuthRequired>on</AuthRequired>
</Protocol>
<Protocol>
<Type>IMAP</Type>
<Server>mail.contoso.com</Server>
<Port>993</Port>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<SSL>on</SSL>
<AuthRequired>on</AuthRequired>
</Protocol>
<Protocol>
<Type>SMTP</Type>
<Server>mail.contoso.com</Server>
<Port>587</Port>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<SSL>on</SSL>
<AuthRequired>on</AuthRequired>
<UsePOPAuth>on</UsePOPAuth>
<SMTPLast>on</SMTPLast>
</Protocol>
</Account>
</Response>
</Autodiscover>

일반적인 XML 파일 위치로 리디렉션되는 XML

사용자를 일반적인 XML 파일 위치로 리디렉션하려면 호스트된 도메인 위치의 암호화되지 않은 URL에서 다음 XML 파일을 구성해야 합니다. 이 XML 파일을 사용하면 사용자가 자동 검색 설정을 위해 다른 사이트로 리디렉션됨을 설명하는 메시지가 표시됩니다.

예를 들어 호스트된 도메인 위치가 contoso.com 전자 메일 주소를 제공하는 hoster.com인 경우 해당 파일은 http://autodiscover.contoso.com/autodiscover/autodiscover.xml에 있습니다. 다음 코드 샘플과 같이 이 예제의 파일 내용이 표시됩니다.

<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns="https://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="https://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<Account>
<AccountType>email</AccountType>
<Action>redirectUrl</Action>
<RedirectUrl>https://autodiscover.hoster.com/autodiscover/autodiscover.xml</RedirectUrl>
</Account>
</Response>
</Autodiscover>

대신 원본 위치에서 일반 HTTP 302 리디렉션을 구성하여 사용자를 리디렉션할 수 있습니다. Outlook 2010은 XML 응답의 302 리디렉션 및 redirectUrl 태그를 둘 다 따릅니다.

모든 자동 검색 응답에 대한 XML 파일 내용을 Autodiscover.xml로 지정해야 합니다.

일반 설정 검색

Outlook 2010에서 사용자 계정을 자동으로 구성하는 데 필요한 설정을 이전 자동 검색 섹션에 설명된 방법을 사용하여 찾을 수 없는 경우 대체 알고리즘에서 일반적인 이름 및 잘 알려진 포트를 사용하여 서버를 감지할 수 있습니다.

Outlook 2010에서 웹 메일 계정의 자동 구성을 사용하면 기본적으로 Google Gmail과 같은 IMAP 지원 웹 메일 계정에 대해 계정 유형이 IMAP로 설정됩니다. 사용자가 POP3 설정을 원하는 경우 Outlook 2010에서 설정이 결정된 후에 새 계정 추가 대화 상자에서 수동으로 서버 설정 구성 옵션을 선택하여 프로토콜 설정을 수동으로 조정할 수 있습니다. 이러한 선택 항목에 대한 이해를 돕기 위해, POP3 및 IMAP 프로토콜을 둘 다 제공하는 메일 서비스 공급자는 각 프로토콜에 대해 동일한 서버 이름을 사용합니다. 따라서 사용자는 IMAP에서 POP3로 선택 상자를 변경하기만 하면 됩니다.

Outlook 2010은 성능을 극대화하고 사용자 대기 시간을 최소화하기 위해 여러 들어오는 서버 설정과 나가는 서버 설정을 동시에 시도합니다. Outlook 2010이 사용자를 위해 구성하려고 하는 설정은 다음 표에 나와 있습니다. 암호화된 모든 설정이 먼저, 상호 배타적으로 시도됩니다. 그런 다음 사용자가 동의하는 경우 암호화되지 않은 설정이 시도됩니다.

IMAP 설정

먼저 암호화된 설정이 시도됩니다. IMAP 서버의 경우 다음 표에 연결 조합이 표시됩니다.

서버 사용자 이름 포트 TLS/SSL SPA

mail.domain

email@domain

993

SSL

SPA

email@domain

993

SSL

SPA 없음

email@domain

993

TLS

SPA

email@domain

993

TLS

SPA 없음

email@domain

143

SSL

SPA

email@domain

143

SSL

SPA 없음

email@domain

143

TLS

SPA

email@domain

143

TLS

SPA 없음

email

993

SSL

SPA

email

993

SSL

SPA 없음

email

993

TLS

SPA

email

993

TLS

SPA 없음

전자 메일

143

SSL

SPA

전자 메일

143

SSL

SPA 없음

전자 메일

143

TLS

SPA

전자 메일

143

TLS

SPA 없음

imap.domain

email@domain

993

SSL

SPA

email@domain

993

SSL

SPA 없음

email@domain

993

TLS

SPA

email@domain

993

TLS

SPA 없음

email@domain

143

SSL

SPA

email@domain

143

SSL

SPA 없음

email@domain

143

TLS

SPA

email@domain

143

TLS

SPA 없음

email

993

SSL

SPA

email

993

SSL

SPA 없음

email

993

TLS

SPA

email

993

TLS

SPA 없음

email

143

SSL

SPA

email

143

SSL

SPA 없음

email

143

TLS

SPA

email

143

TLS

SPA 없음

domain

email@domain

993

SSL

SPA

email@domain

993

SSL

SPA 없음

email@domain

993

TLS

SPA

email@domain

993

TLS

SPA 없음

email@domain

143

SSL

SPA

email@domain

143

SSL

SPA 없음

email@domain

143

TLS

SPA

email@domain

143

TLS

SPA 없음

email

993

SSL

SPA

email

993

SSL

SPA 없음

email

993

TLS

SPA

email

993

TLS

SPA 없음

email

143

SSL

SPA

email

143

SSL

SPA 없음

email

143

TLS

SPA

email

143

TLS

SPA 없음

다음으로, 암호화되지 않은 연결 시도를 게속 진행하라는 메시지가 표시된 후 암호화되지 않은 조합이 시도됩니다. 암호화되지 않으며 Outlook 2010에서 구성을 시도하는 IMAP 설정이 다음 표에 나와 있습니다.

서버 사용자 이름 포트 TLS/SSL SPA

mail.domain

email@domain

143

암호화되지 않음

SPA

email@domain

143

암호화되지 않음

SPA 없음

email

143

암호화되지 않음

SPA

email

143

암호화되지 않음

SPA 없음

imap.domain

email@domain

143

암호화되지 않음

SPA

email@domain

143

암호화되지 않음

SPA 없음

email

143

암호화되지 않음

SPA

email

143

암호화되지 않음

SPA 없음

domain

email@domain

143

암호화되지 않음

SPA

email@domain

143

암호화되지 않음

SPA 없음

email

143

암호화되지 않음

SPA

email

143

암호화되지 않음

SPA 없음

POP3 설정

먼저 암호화된 설정이 시도됩니다. POP3 서버의 경우 다음 표에 연결 조합이 표시됩니다.

서버 사용자 이름 포트 TLS/SSL SPA

mail.domain

email@domain

995

SSL

SPA

email@domain

995

SSL

SPA 없음

email@domain

995

TLS

SPA

email@domain

995

TLS

SPA 없음

email@domain

110

SSL

SPA

email@domain

110

SSL

SPA 없음

email@domain

110

TLS

SPA

email@domain

110

TLS

SPA 없음

email

995

SSL

SPA

email

995

SSL

SPA 없음

email

995

TLS

SPA

email

995

TLS

SPA 없음

email

110

SSL

SPA

email

110

SSL

SPA 없음

email

110

TLS

SPA

email

110

TLS

SPA 없음

pop3.domain

email@domain

995

SSL

SPA

email@domain

995

SSL

SPA 없음

email@domain

995

TLS

SPA

email@domain

995

TLS

SPA 없음

email@domain

110

SSL

SPA

email@domain

110

SSL

SPA 없음

email@domain

110

TLS

SPA

email@domain

110

TLS

SPA 없음

email

995

SSL

SPA

email

995

SSL

SPA 없음

email

995

TLS

SPA

email

995

TLS

SPA 없음

email

110

SSL

SPA

email

110

SSL

SPA 없음

email

110

TLS

SPA

email

110

TLS

SPA 없음

pop.domain

email@domain

995

SSL

SPA

email@domain

995

SSL

SPA 없음

email@domain

995

TLS

SPA

email@domain

995

TLS

SPA 없음

email@domain

110

SSL

SPA

email@domain

110

SSL

SPA 없음

email@domain

110

TLS

SPA

email@domain

110

TLS

SPA 없음

email

995

SSL

SPA

email

995

SSL

SPA 없음

email

995

TLS

SPA

email

995

TLS

SPA 없음

email

110

SSL

SPA

email

110

SSL

SPA 없음

email

110

TLS

SPA

email

110

TLS

SPA 없음

domain

email@domain

995

SSL

SPA

email@domain

995

SSL

SPA 없음

email@domain

995

TLS

SPA

email@domain

995

TLS

SPA 없음

email@domain

110

SSL

SPA

email@domain

110

SSL

SPA 없음

email@domain

110

TLS

SPA

email@domain

110

TLS

SPA 없음

email

995

SSL

SPA

email

995

SSL

SPA 없음

email

995

TLS

SPA

email

995

TLS

SPA 없음

email

110

SSL

SPA

email

110

SSL

SPA 없음

email

110

TLS

SPA

email

110

TLS

SPA 없음

다음으로, 암호화되지 않은 연결 시도를 게속 진행하라는 메시지가 표시된 후 암호화되지 않은 조합이 시도됩니다. 암호화되지 않으며 Outlook 2010에서 구성을 시도하는 POP3 설정이 다음 표에 나와 있습니다.

서버 사용자 이름 포트 TLS/SSL SPA

mail.domain

email@domain

110

암호화되지 않음

SPA

email@domain

110

암호화되지 않음

SPA 없음

email

110

암호화되지 않음

SPA

email

110

암호화되지 않음

SPA 없음

pop3.domain

email@domain

110

암호화되지 않음

SPA

email@domain

110

암호화되지 않음

SPA 없음

email

110

암호화되지 않음

SPA

email

110

암호화되지 않음

SPA 없음

pop.domain

email@domain

110

암호화되지 않음

SPA

email@domain

110

암호화되지 않음

SPA 없음

email

110

암호화되지 않음

SPA

email

110

암호화되지 않음

SPA 없음

domain

email@domain

110

암호화되지 않음

SPA

email@domain

110

암호화되지 않음

SPA 없음

email

110

암호화되지 않음

SPA

email

110

암호화되지 않음

SPA 없음

SMTP 설정

먼저 암호화된 설정이 시도됩니다. SMTP 서버의 경우 다음 표에 연결 조합이 표시됩니다.

서버 사용자 이름 포트 TLS/SSL SPA

mail.domain

email@domain

587

SSL

SPA

email@domain

587

SSL

SPA 없음

email@domain

587

TLS

SPA

email@domain

587

TLS

SPA 없음

email@domain

25

SSL

SPA

email@domain

25

SSL

SPA 없음

email@domain

25

TLS

SPA

email@domain

25

TLS

SPA 없음

email

587

SSL

SPA

email

587

SSL

SPA 없음

email

587

TLS

SPA

email

587

TLS

SPA 없음

email

25

SSL

SPA

email

25

SSL

SPA 없음

email

25

TLS

SPA

email

25

TLS

SPA 없음

익명

587

SSL

해당 없음

익명

587

TLS

해당 없음

익명

25

SSL

해당 없음

익명

25

TLS

해당 없음

smtp.domain

email@domain

587

SSL

SPA

email@domain

587

SSL

SPA 없음

email@domain

587

TLS

SPA

email@domain

587

TLS

SPA 없음

email@domain

25

SSL

SPA

email@domain

25

SSL

SPA 없음

email@domain

25

TLS

SPA

email@domain

25

TLS

SPA 없음

email

587

SSL

SPA

email

587

SSL

SPA 없음

email

587

TLS

SPA

email

587

TLS

SPA 없음

email

25

SSL

SPA

email

25

SSL

SPA 없음

email

25

TLS

SPA

email

25

TLS

SPA 없음

익명

587

SSL

해당 없음

익명

587

TLS

해당 없음

익명

25

SSL

해당 없음

익명

25

TLS

해당 없음

domain

email@domain

587

SSL

SPA

email@domain

587

SSL

SPA 없음

email@domain

587

TLS

SPA

email@domain

587

TLS

SPA 없음

email@domain

25

SSL

SPA

email@domain

25

SSL

SPA 없음

email@domain

25

TLS

SPA

email@domain

25

TLS

SPA 없음

email

587

SSL

SPA

email

587

SSL

SPA 없음

email

587

TLS

SPA

email

587

TLS

SPA 없음

email

25

SSL

SPA

email

25

SSL

SPA 없음

email

25

TLS

SPA

email

25

TLS

SPA 없음

익명

587

SSL

해당 없음

익명

587

TLS

해당 없음

익명

25

SSL

해당 없음

익명

25

TLS

해당 없음

다음으로, 암호화되지 않은 연결 시도를 게속 진행하라는 메시지가 표시된 후 암호화되지 않은 조합이 시도됩니다. 암호화되지 않으며 Outlook 2010에서 구성을 시도하는 SMTP 설정이 다음 표에 나와 있습니다.

서버 사용자 이름 포트 TLS/SSL SPA

mail.domain

email@domain

25

암호화되지 않음

SPA

email@domain

25

암호화되지 않음

SPA 없음

email

25

암호화되지 않음

SPA

email

25

암호화되지 않음

SPA 없음

익명

25

암호화되지 않음

해당 없음

smtp.domain

email@domain

25

암호화되지 않음

SPA

email@domain

25

암호화되지 않음

SPA 없음

email

25

암호화되지 않음

SPA

email

25

암호화되지 않음

SPA 없음

익명

25

암호화되지 않음

해당 없음

domain

email@domain

25

암호화되지 않음

SPA

email@domain

25

암호화되지 않음

SPA 없음

email

25

암호화되지 않음

SPA

email

25

암호화되지 않음

SPA 없음

익명

25

암호화되지 않음

해당 없음