DacDeployOptions 클래스

Defines options that affect the behavior of package deployment to a database.

상속 계층

System.Object
  Microsoft.SqlServer.Dac.DacDeployOptions

네임스페이스:  Microsoft.SqlServer.Dac
어셈블리:  Microsoft.SqlServer.Dac(Microsoft.SqlServer.Dac.dll)

구문

‘선언
Public NotInheritable Class DacDeployOptions
‘사용 방법
Dim instance As DacDeployOptions

public sealed class DacDeployOptions

public ref class DacDeployOptions sealed

[<SealedAttribute>]
type DacDeployOptions =  class end

public final class DacDeployOptions

DacDeployOptions 유형에서 다음 멤버를 표시합니다.

생성자

	이름	설명
	DacDeployOptions	Create a new instance of the DacDeployOptions class with default options.

맨 위로 이동

속성

	이름	설명
	AdditionalDeploymentContributorArguments	Specifies additional deployment contributor arguments in addition to those already listed in the dacpac.
	AdditionalDeploymentContributors	Specifies additional deployment contributors which should run - in addition to those specified in the dacpac.
	AllowDropBlockingAssemblies	Get or set boolean that specifies whether CLR deployment will cause blocking assemblies to be dropped.
	AllowIncompatiblePlatform	Get or set boolean that specifies whether deployment will block due to platform compatibility.
	BackupDatabaseBeforeChanges	Get or set boolean that specifies whether a database backup will be performed before proceeding with the actual deployment actions.
	BlockOnPossibleDataLoss	Get or set boolean that specifies whether deployment should stop if the operation could cause data loss.
	BlockWhenDriftDetected	Get or set boolean that specifies whether the system will check for differences between the present state of the database and the registered state of the database and block deployment if changes are detected. Even if this option is set to true, drift detection will only occur on a database if it was previously deployed with the RegisterDataTierApplication option enabled.
	CommentOutSetVarDeclarations	Get or set boolean that specifies whether the declaration of SQLCMD variables are commented out in the script header.
	CompareUsingTargetCollation	Get or set boolean that specifies whether the source collation will be used for identifier comparison.
	CreateNewDatabase	Get or set boolean that specifies whether the existing database will be dropped and a new database created before proceeding with the actual deployment actions. Acquires single-user mode before dropping the existing database.
	DeployDatabaseInSingleUserMode	Get or set boolean that specifies whether the system will acquire single-user mode on the target database during the duration of the deployment operation.
	DisableAndReenableDdlTriggers	Get or set boolean that specifies if all DDL triggers will be disabled for the duration of the deployment operation and then re-enabled after all changes are applied.
	DoNotAlterChangeDataCaptureObjects	Get or set boolean that specifies whether items configured for Change Data Capture (CDC) should be altered during deployment.
	DoNotAlterReplicatedObjects	Get or set boolean that specifies whether items configured for Replication should be altered during deployment.
	DropConstraintsNotInSource	Get or set boolean that specifies whether to drop all constraints that do not exist in the source model.
	DropDmlTriggersNotInSource	Get or set boolean that specifies whether to drop all DML triggers that do not exist in the source model.
	DropExtendedPropertiesNotInSource	Get or set boolean that specifies whether to drop all extended properties that do not exist in the source model.
	DropIndexesNotInSource	Get or set boolean that specifies whether to drop all indexes that do not exist in the source model.
	DropObjectsNotInSource	Get or set boolean that specifies whether objects that exist in the target but not source should be dropped during deployment.
	DropPermissionsNotInSource	Get or set boolean that specifies whether to drop all permissions that do not exist in the source model.
	DropRoleMembersNotInSource	Get or set boolean that specifies whether to drop all role memberships that do not exist in the source model.
	GenerateSmartDefaults	Get or set boolean that specifies whether default values should be generated to populate NULL columns that are constrained to NOT NULL values.
	IgnoreAnsiNulls	Get or set boolean that specifies whether to exclude the ANSI_NULL option from consideration when comparing the source and target model.
	IgnoreAuthorizer	Get or set boolean that specifies whether to exclude the AUTHORIZATION option from consideration when comparing the source and target model.
	IgnoreColumnCollation	Get or set boolean that specifies whether to exclude the collation specifier from consideration when comparing the source and target model.
	IgnoreComments	Get or set boolean that specifies whether to exclude comments from consideration when comparing the source and target model.
	IgnoreCryptographicProviderFilePath	Get or set boolean that specifies whether to exclude the file specification of a cryptographic provider from consideration when comparing the source and target model.
	IgnoreDdlTriggerOrder	Get or set boolean that specifies whether to exclude DDL trigger order from consideration when comparing the source and target model.
	IgnoreDdlTriggerState	Get or set boolean that specifies whether to exclude DDL trigger state from consideration when comparing the source and target model.
	IgnoreDefaultSchema	Get or set boolean that specifies whether to exclude the DEFAULT_SCHEMA option from consideration when comparing the source and target model.
	IgnoreDmlTriggerOrder	Get or set boolean that specifies whether to exclude DML trigger order from consideration when comparing the source and target model.
	IgnoreDmlTriggerState	Get or set boolean that specifies whether to exclude DML trigger state from consideration when comparing the source and target model.
	IgnoreExtendedProperties	Get or set boolean that specifies whether to exclude all extended properties from consideration when comparing the source and target model.
	IgnoreFileAndLogFilePath	Get or set boolean that specifies whether to exclude the FILENAME option of FILE objects from consideration when comparing the source and target model.
	IgnoreFilegroupPlacement	Get or set boolean that specifies whether to exclude the filegroup specifier from consideration when comparing the source and target model.
	IgnoreFileSize	Get or set boolean that specifies whether to exclude the SIZE option of FILE objects from consideration when comparing the source and target model.
	IgnoreFillFactor	Get or set boolean that specifies whether to exclude the FILLFACTOR option from consideration when comparing the source and target model.
	IgnoreFullTextCatalogFilePath	Get or set boolean that specifies whether to exclude the path specification of FULLTEXT CATALOG objects from consideration when comparing the source and target model.
	IgnoreIdentitySeed	Get or set boolean that specifies whether to exclude the seed value of IDENTITY columns from consideration when comparing the source and target model.
	IgnoreIncrement	Get or set boolean that specifies whether to exclude the increment value of IDENTITY columns from consideration when comparing the source and target model.
	IgnoreIndexOptions	Get or set boolean that specifies whether to exclude differences in index options from consideration when comparing the source and target model.
	IgnoreIndexPadding	Get or set boolean that specifies whether to exclude the PAD_INDEX option from consideration when comparing the source and target model.
	IgnoreKeywordCasing	Get or set boolean that specifies whether to exclude difference in the casing of keywords from consideration when comparing the source and target model.
	IgnoreLockHintsOnIndexes	Get or set boolean that specifies whether to exclude the ALLOW_ROW_LOCKS and ALLOW_PAGE_LOGKS options from consideration when comparing the source and target model.
	IgnoreLoginSids	Get or set boolean that specifies whether to exclude the SID option of the LOGIN object from consideration when comparing the source and target model.
	IgnoreNotForReplication	Get or set boolean that specifies whether to exclude the NOT FOR REPLICATION option from consideration when comparing the source and target model.
	IgnoreObjectPlacementOnPartitionScheme	Get or set boolean that specifies whether to exclude the partition scheme object from consideration when comparing the source and target model for the following objects: Table, Index, Unique Key, Primary Key, and Queue.
	IgnorePartitionSchemes	Get or set boolean that specifies whether to exclude the parameter type and boundary VALUES of a PARTITION FUNCTION from consideration when comparing the source and target model. Also excludes FILEGROUP and partition function of a PARTITION SCHEMA from consideration when comparing the source and target model.
	IgnorePermissions	Get or set boolean that specifies whether to exclude all permission statements from consideration when comparing the source and target model.
	IgnoreQuotedIdentifiers	Get or set boolean that specifies whether to exclude the QUOTED_IDENTIFIER option from consideration when comparing the source and target model.
	IgnoreRoleMembership	Get or set boolean that specifies whether to exclude all ROLE MEMBERSHIP objects from consideration when comparing the source and target model.
	IgnoreRouteLifetime	Get or set boolean that specifies whether to exclude the LIFETIME option of ROUTE objects from consideration when comparing the source and target model.
	IgnoreSemicolonBetweenStatements	Get or set boolean that specifies whether to exclude the existence or absence of semi-colons from consideration when comparing the source and target model.
	IgnoreTableOptions	Get or set boolean that specifies whether the options on the target table are updated to match the source table.
	IgnoreUserSettingsObjects	Get or set boolean that specifies whether to exclude user settings from consideration when comparing the source and target model.
	IgnoreWhitespace	Get or set boolean that specifies whether to exclude whitespace from consideration when comparing the source and target model.
	IgnoreWithNocheckOnCheckConstraints	Get or set boolean that specifies whether to exclude the CHECK|NO CHECK option of a CHECK constraint object from consideration when comparing the source and target model.
	IgnoreWithNocheckOnForeignKeys	Get or set boolean that specifies whether to exclude the CHECK|NO CHECK option of a FOREIGN KEY constraint object from consideration when comparing the source and target model.
	IncludeCompositeObjects	Get or set boolean that specifies whether to include referenced, external elements that also compose the source model and then update the target database in a single deployment operation.
	IncludeTransactionalScripts	Get or set boolean that specifies whether to use transations during the deployment operation and commit the transaction after all changes are successfully applied.
	NoAlterStatementsToChangeClrTypes	Get or set boolean that specifies whether to force a change to CLR assemblies by dropping and recreating them.
	PopulateFilesOnFileGroups	Get or set boolean that specifies whether files are supplied for filegroups defined in the deployment source.
	RegisterDataTierApplication	Get or set boolean that specifies whether the database will be registered as a Data-Tier Application. If the target database is already a registered Data-Tier Application, then the registration will be updated.
	RunDeploymentPlanExecutors	Specifies whether DeploymentPlanExecutor contributors should be run when other operations are executed. Default is false.
	ScriptDatabaseCollation	Get or set boolean that specifies whether the target database should be altered to match the source model's collation.
	ScriptDatabaseCompatibility	Get or set boolean that specifies whether the target database should be altered to match the source model's compatibility level.
	ScriptDatabaseOptions	Get or set boolean that specifies whether the database options in the target database should be updated to match the source model.
	ScriptDeployStateChecks	Get or set boolean that specifies whether the target database should be checked to ensure that it exists, is online and can be updated.
	ScriptFileSize	Get or set boolean that specifies whether a file size is specified when adding files to file groups.
	ScriptNewConstraintValidation	Get or set boolean that specifies whether constraints are validated after all changes are applied.
	ScriptRefreshModule	Get or set boolean that specifies whether referencing procedures are refreshed when referenced objects are updated.
	SqlCommandVariableValues	Get dictionary of SQL command variable values, keyed by variable name.
	TreatVerificationErrorsAsWarnings	Get or set boolean that specifies whether the deployment operation should proceed when errors are generated during plan verification.
	UnmodifiableObjectWarnings	Get or set boolean that specifies whether the deployment operation should proceed when errors are generated during plan verification.
	VerifyCollationCompatibility	Get or set boolean that specifies whether deployment will verify that the collation specified in the source model is compatible with the collation specified in the target model.
	VerifyDeployment	Get or set boolean that specifies whether the plan verification phase is executed or not.

맨 위로 이동

메서드

	이름	설명
	Equals	(Object에서 상속됨)
	GetHashCode	(Object에서 상속됨)
	GetType	(Object에서 상속됨)
	ToString	(Object에서 상속됨)

맨 위로 이동

스레드 보안

이 유형의 모든 공용 static(Visual Basic에서는 Shared) 멤버는 스레드로부터 안전합니다. 인스턴스 멤버는 스레드로부터의 안전성이 보장되지 않습니다.

참고 항목

참조

Microsoft.SqlServer.Dac 네임스페이스