Export (0) Print
Expand All

Microsoft Security Bulletin MS14-022 - Critical

Vulnerabilities in Microsoft SharePoint Server Could Allow Remote Code Execution (2952166)

Published: May 13, 2014

Version: 1.0

General Information

Executive Summary

This security update resolves multiple privately reported vulnerabilities in Microsoft Office server and productivity software. The most severe of these vulnerabilities could allow remote code execution if an authenticated attacker sends specially crafted page content to a target SharePoint server.

This security update is rated Critical for supported editions of Microsoft SharePoint Server 2007, Microsoft SharePoint Server 2010, Microsoft SharePoint Server 2013, Microsoft Office Web Apps 2010, Microsoft Office Web Apps Server 2013, Microsoft SharePoint Services 3.0, and Microsoft SharePoint Foundation 2010, Microsoft SharePoint Foundation 2013, Microsoft SharePoint Designer 2007, Microsoft SharePoint Designer 2010, and Microsoft SharePoint Designer 2013. For more information, see the Affected and Non-Affected Software section.

The security update addresses the vulnerabilities by correcting how SharePoint Server and Web Applications sanitize specially crafted page content. For more information about the vulnerabilities, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability later in this bulletin.

Recommendation. Customers can configure automatic updating to check online for updates from Microsoft Update by using the Microsoft Update service. Customers who have automatic updating enabled and configured to check online for updates from Microsoft Update typically will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates from Microsoft Update and install this update manually. For information about specific configuration options in automatic updating, see Microsoft Knowledge Base Article 294871.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update at the earliest opportunity using update management software, or by checking for updates using the Microsoft Update service.

Note for SharePoint Server The detection tools (such as Microsoft Update, WSUS, MBSA, SMS, and System Center Configuration Manager) are applicable for single-server Microsoft SharePoint Server deployments. The detection tools do not detect the applicability of the updates on systems configured as part of a multiple-system SharePoint server farm. For recommended instructions on how to apply updates to SharePoint Server, see Deploy software updates for SharePoint 2013.

Note for Microsoft Office Web Apps Server 2013 Applying Office Web Apps Server updates by using the automatic updates process is not supported with Office Web Apps Server. For recommended instructions on how to apply updates to Office Web Apps Server, see Apply software updates to Office Web Apps Server.

 

Knowledge Base Article

  • Knowledge Base Article: 2952166
  • File Information: Yes
  • SHA1/SHA2 hashes: Yes
  • Known issues: Yes

 

The following software has been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, see Microsoft Support Lifecycle.

Affected Software 

Microsoft Server Software 

Software

Component

Maximum Security Impact

Aggregate Severity Rating

Updates Replaced

Microsoft SharePoint Server 2007

Microsoft SharePoint Server 2007 Service Pack 3 (32-bit editions)

Microsoft Windows SharePoint Services 3.0 Service Pack 3 (32-bit versions)
(2837616)

Remote Code Execution

Critical

2760420 in MS13-067

Microsoft SharePoint Server 2007 Service Pack 3 (32-bit editions)

SharePoint Server 2007 Service Pack 3 (32-bit editions) (dlcapp)
(2596902)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2007 Service Pack 3 (32-bit editions)

SharePoint Server 2007 Service Pack 3 (32-bit editions) (dlc)
(2596763)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2007 Service Pack 3 (64-bit editions)

Microsoft Windows SharePoint Services 3.0 Service Pack 3 (64-bit versions)
(2837616)

Remote Code Execution

Critical

2760420 in MS13-067

Microsoft SharePoint Server 2007 Service Pack 3 (64-bit editions)

SharePoint Server 2007 Service Pack 3 (64-bit editions) (dlcapp)
(2596902)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2007 Service Pack 3 (64-bit editions)

SharePoint Server 2007 Service Pack 3 (64-bit editions) (dlc)
(2596763)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2010

Microsoft SharePoint Server 2010 Service Pack 1

Microsoft SharePoint Foundation 2010 Service Pack 1 (wss)
(2837588)

Remote Code Execution

Critical

2810067 in MS13-067

Microsoft SharePoint Server 2010 Service Pack 2

Microsoft SharePoint Foundation 2010 Service Pack 2 (wss)
(2837588)

Remote Code Execution

Critical

2810067 in MS13-067

Microsoft SharePoint Server 2010 Service Pack 1

Microsoft SharePoint Server 2010 Service Pack 1 (coreserver)
(2837598)

Remote Code Execution

Critical

2817393 in MS13-067

Microsoft SharePoint Server 2010 Service Pack 2

Microsoft SharePoint Server 2010 Service Pack 2 (coreserver)
(2837598)

Remote Code Execution

Critical

2817393 in MS13-067

Microsoft SharePoint Server 2013

Microsoft SharePoint Server 2013

Microsoft SharePoint Foundation 2013 (sts)
(2863856)

Remote Code Execution

Critical

2817315 in MS13-067

Microsoft SharePoint Server 2013 Service Pack 1

Microsoft SharePoint Foundation 2013 Service Pack 1 (sts)
(2863856)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2013

Microsoft SharePoint Foundation 2013 (wssloc)
(2863863)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2013 Service Pack 1

Microsoft SharePoint Foundation 2013 Service Pack 1 (wssloc)
(2863863)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2013

Microsoft SharePoint Server 2013 (coreserverloc)
(2863829)

Remote Code Execution

Critical

2850058 in MS13-100

Microsoft SharePoint Server 2013 Service Pack 1

Microsoft SharePoint Server 2013 Service Pack 1 (coreserverloc)
(2863829)

Remote Code Execution

Critical

None

 

Microsoft Office Services and Web Apps

Software

Component

Maximum Security Impact

Aggregate Severity Rating

Updates Replaced

Microsoft SharePoint Server 2010

Microsoft SharePoint Server 2010 Service Pack 1

Microsoft Project Server 2010 Service Pack 1
(2863922)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2010 Service Pack 2

Microsoft Project Server 2010 Service Pack 2
(2863922)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2013

Microsoft SharePoint Server 2013

Microsoft Project Server 2013
(2760236)

Remote Code Execution

Critical

None

Microsoft SharePoint Server 2013 Service Pack 1

Microsoft Project Server 2013 Service Pack 1
(2760236)

Remote Code Execution

Critical

None

Microsoft Office Web Apps 2010

Microsoft Office Web Apps 2010 Service Pack 1

Microsoft Web Applications 2010 Service Pack 1
(2880536)

Remote Code Execution

Critical

2878221 in MS14-017

Microsoft Office Web Apps 2010 Service Pack 2

Microsoft Web Applications 2010 Service Pack 2
(2880536)

Remote Code Execution

Critical

2878221 in MS14-017

Microsoft Office Web Apps 2013

Microsoft Office Web Apps 2013

Microsoft Office Web Apps Server 2013
(2880453)

Remote Code Execution

Critical

2878219 in MS14-017

Microsoft Office Web Apps 2013 Service Pack 1

Microsoft Office Web Apps Server 2013 Service Pack 1
(2880453)

Remote Code Execution

Critical

2878219 in MS14-017

 

Productivity Software

Affected Software

Maximum Security Impact

Aggregate Severity Rating

Updates Replaced

SharePoint Server 2013 Client Components SDK

SharePoint Server 2013 Client Components SDK (32-bit version)
(2863854)

Remote Code Execution

Critical

None

SharePoint Server 2013 Client Components SDK (64-bit version)
(2863854)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2007

Microsoft SharePoint Designer 2007 Service Pack 3 (ewd)
(2596861)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2007 Service Pack 3 (spd)
(2596810)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2010

Microsoft SharePoint Designer 2010 Service Pack 1 (32-bit versions)
(2810069)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2010 Service Pack 2 (32-bit versions)
(2810069)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2010 Service Pack 1 (64-bit versions)
(2810069)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2010 Service Pack 2 (64-bit versions)
(2810069)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013

Microsoft SharePoint Designer 2013 (32-bit versions) (spdcore)
(2752096)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013 Service Pack 1 (32-bit versions) (spdcore)
(2752096)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013 (32-bit versions) (spd)
(2863836)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013 Service Pack 1 (32-bit versions) (spd)
(2863836)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013 (64-bit versions) (spdcore)
(2752096)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013 Service Pack 1 (64-bit versions) (spdcore)
(2752096)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013 (64-bit versions) (spd)
(2863836)

Remote Code Execution

Critical

None

Microsoft SharePoint Designer 2013 Service Pack 1 (64-bit versions) (spd)
(2863836)

Remote Code Execution

Critical

None

 

Non-Affected Software 

Software

Microsoft Project Server 2007 Service Pack 3 (32-bit edition)

Microsoft Project Server 2007 Service Pack 3 (64-bit edition)

 

Why does this update address several reported security vulnerabilities? 
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files.

Why are multiple update packages available for some affected software? 
The updates required to address the vulnerabilities described in this bulletin are offered across different updates packages as indicated in the Affected Software table due to the componentized servicing model for Microsoft Office and Microsoft SharePoint Server software.

There are multiple update packages available for some affected software. Do I need to install all the updates listed in the Affected Software table for the software? 
Yes. Customers should apply all updates offered for the software installed on their systems.

Do I need to install these security updates in a particular sequence? 
No. Multiple updates for one version of Microsoft Office or Microsoft SharePoint Server software can be applied in any sequence.

I am using an older release of the software discussed in this security bulletin. What should I do? 
The affected software listed in this bulletin has been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, see the Microsoft Support Lifecycle website.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Service Pack Lifecycle Support Policy.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an , Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, see the Microsoft Worldwide Information website, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the May bulletin summary. For more information, see Microsoft Exploitability Index.

Microsoft Server Software 

Vulnerability Severity Rating and Maximum Security Impact by Affected Software

Affected Software

SharePoint Page Content Vulnerability - CVE-2014-0251

SharePoint XSS Vulnerability - CVE-2014-1754

Web Applications Page Content Vulnerability - CVE-2014-1813

Aggregate Severity Rating

Microsoft SharePoint Server 2007

Microsoft Windows SharePoint Services 3.0 Service Pack 3 (32-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

SharePoint Server 2007 (32-bit editions) (dlcapp)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

SharePoint Server 2007 (32-bit editions) (dlc)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft Windows SharePoint Services 3.0 Service Pack 3 (64-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

SharePoint Server 2007 (64-bit editions) (dlcapp)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

SharePoint Server 2007 (64-bit editions) (dlc)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Server 2010

Microsoft SharePoint Foundation 2010 Service Pack 1 (wss)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Foundation 2010 Service Pack 2 (wss)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Server 2010 Service Pack 1 (coreserver)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Server 2010 Service Pack 2 (coreserver)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Server 2013

Microsoft SharePoint Foundation 2013 (sts)

Critical 
Remote Code Execution

Important 
Elevation of Privilege

Not applicable

Critical

Microsoft SharePoint Foundation 2013 (wssloc)

Critical 
Remote Code Execution

Important 
Elevation of Privilege

Not applicable

Critical

Microsoft SharePoint Server 2013 (coreserverloc)

Critical 
Remote Code Execution

Important 
Elevation of Privilege

Not applicable

Critical

 

Microsoft Office Services and Web Apps 

Vulnerability Severity Rating and Maximum Security Impact by Affected Software

Affected Software

SharePoint Page Content Vulnerability - CVE-2014-0251

SharePoint XSS Vulnerability - CVE-2014-1754

Web Applications Page Content Vulnerability - CVE-2014-1813

Aggregate Severity Rating

Microsoft SharePoint Server 2010

Microsoft Project Server 2010 Service Pack 1

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft Project Server 2010 Service Pack 2

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Server 2013

Microsoft Project Server 2013

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft Project Server 2013 Service Pack 1

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft Office Web Apps 2010

Microsoft Web Applications 2010 Service Pack 1

Critical 
Remote Code Execution

Not applicable

Critical 
Remote Code Execution

Critical

Microsoft Web Applications 2010 Service Pack 2

Critical 
Remote Code Execution

Not applicable

Critical 
Remote Code Execution

Critical

Microsoft Office Web Apps 2013

Microsoft Office Web Apps Server 2013

Critical 
Remote Code Execution

Important 
Elevation of Privilege

Not applicable

Critical

Microsoft Office Web Apps Server 2013 Service Pack 1

Critical 
Remote Code Execution

Important 
Elevation of Privilege

Not applicable

Critical

 

Productivity Software 

Vulnerability Severity Rating and Maximum Security Impact by Affected Software

Affected Software

SharePoint Page Content Vulnerability - CVE-2014-0251

SharePoint XSS Vulnerability - CVE-2014-1754

Web Applications Page Content Vulnerability - CVE-2014-1813

Aggregate Severity Rating

SharePoint Server 2013 Client Components SDK

SharePoint Server 2013 Client Components SDK (32-bit version)

Critical 
Remote Code Execution

Important 
Elevation of Privilege

Not applicable

Critical

SharePoint Server 2013 Client Components SDK (64-bit version)

Critical 
Remote Code Execution

Important 
Elevation of Privilege

Not applicable

Critical

Microsoft SharePoint Designer

Microsoft SharePoint Designer 2007 Service Pack 3 (ewd)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2007 Service Pack 3

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2010 Service Pack 1 (32-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2010 Service Pack 2 (32-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2010 Service Pack 1 (64-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2010 Service Pack 2 (64-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2013 (32-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2013 Service Pack 1 (32-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2013 (64-bit versions) (spd)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

Microsoft SharePoint Designer 2013 Service Pack 1 (64-bit versions)

Critical 
Remote Code Execution

Not applicable

Not applicable

Critical

 

Related remote code execution vulnerabilities exist in Microsoft SharePoint Server. An authenticated attacker who successfully exploited any of these related vulnerabilities could run arbitrary code in the security context of the W3WP service account.

To view these related vulnerabilities as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2014-0251.

Mitigating Factors

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • To exploit any of these related vulnerabilities, an attacker must be able to authenticate on the target SharePoint site. Note that this is not a mitigating factor if the SharePoint site is configured to allow anonymous users to access the site. By default, anonymous access is not enabled.

Workarounds

Microsoft has not identified any workarounds for these vulnerabilities.

FAQ

What is the scope of the vulnerabilities? 
These are related remote code execution vulnerabilities.

What causes the vulnerabilities? 
When page content is not properly sanitized, conditions exist where an attacker could run arbitrary code in the security context of the W3WP service account.

Why is a single CVE Identifier assigned to multiple vulnerabilities? 
Although the vulnerabilities are in different components of Microsoft SharePoint Server, they all share the same underlying issue and related code. The vulnerabilities are grouped into a single CVE Identifier that represents the underlying issue.

What might an attacker use the vulnerabilities to do? 
An attacker who successfully exploited any of these related vulnerabilities could run arbitrary code in the security context of the W3WP service account on the target SharePoint site.

How could an attacker exploit the vulnerabilities? 
An authenticated attacker could attempt to exploit any of these related vulnerabilities by sending specially crafted page content to a SharePoint server.

What systems are primarily at risk from the vulnerabilities? 
Systems that are running an affected version of SharePoint server are primarily at risk.

What does the update do? 
The update addresses these related vulnerabilities by correcting how SharePoint Server sanitizes specially crafted page content.

When this security bulletin was issued, had these vulnerabilities been publicly disclosed? 
No. Microsoft received information about these related vulnerabilities through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that these vulnerabilities were being exploited? 
No. Microsoft had not received any information to indicate that these related vulnerabilities had been publicly used to attack customers when this security bulletin was originally issued.

An elevation of privilege vulnerability exists in Microsoft SharePoint Server. An attacker who successfully exploited this vulnerability could perform cross-site scripting attacks on affected systems and run script in the security context of the logged-on user.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2014-1754.

Mitigating Factors

Microsoft has not identified any mitigating factors for this vulnerability.

Workarounds

Microsoft has not identified any workarounds for this vulnerability.

FAQ

What is the scope of the vulnerability? 
This is an elevation of privilege vulnerability.

What causes the vulnerability? 
The vulnerability is caused when SharePoint Server does not properly sanitize a specially crafted request to an affected SharePoint server.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could read content that the attacker is not authorized to read, use the victim's identity to take actions on the SharePoint site on behalf of the victim, such as change permissions and delete content, and inject malicious content in the browser of the victim.

How could an attacker exploit the vulnerability? 
An authenticated attacker could exploit this vulnerability by sending a specially crafted request to an affected SharePoint server.

What systems are primarily at risk from the vulnerability? 
Any system running an affected version of SharePoint Server is primarily at risk from the vulnerability.

What does the update do? 
The update addresses the vulnerability by helping to ensure that SharePoint Server properly sanitizes user input.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

A remote code execution vulnerability exists in Microsoft Web Applications. An authenticated attacker who successfully exploited this vulnerability could run arbitrary code in the security context of the W3WP service account.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2014-1813.

Mitigating Factors

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • To exploit this vulnerability, an attacker must be able to authenticate on the target SharePoint site. Note that this is not a mitigating factor if the SharePoint site is configured to allow anonymous users to access the site. By default, anonymous access is not enabled.

Workarounds

Microsoft has not identified any workarounds for this vulnerability.

FAQ

What is the scope of the vulnerability? 
This is a remote code execution vulnerability.

What causes the vulnerability? 
When page content is not properly sanitized, conditions exist where an attacker could run arbitrary code in the security context of the W3WP service account.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited the vulnerability could run arbitrary code in the security context of the W3WP service account on the target SharePoint site.

How could an attacker exploit the vulnerability? 
An authenticated attacker could attempt to exploit the vulnerability by sending specially crafted page content to a SharePoint server.

What systems are primarily at risk from the vulnerability? 
Systems that are running an affected version of SharePoint server are primarily at risk.

What does the update do? 
The update addresses the vulnerability by correcting how affected Web Applications sanitize specially crafted page content.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Several resources are available to help administrators deploy security updates. 

  • Microsoft Baseline Security Analyzer (MBSA) lets administrators scan local and remote systems for missing security updates and common security misconfigurations. 
  • Windows Server Update Services (WSUS), Systems Management Server (SMS), and System Center Configuration Manager help administrators distribute security updates. 
  • The Update Compatibility Evaluator components included with Application Compatibility Toolkit aid in streamlining the testing and validation of Windows updates against installed applications. 

For information about these and other tools that are available, see Security Tools for IT Pros

Note for SharePoint Server The detection tools (such as Microsoft Update, WSUS, MBSA, SMS, and System Center Configuration Manager) are applicable for single-server Microsoft SharePoint Server deployments. The detection tools do not detect the applicability of the updates on systems configured as part of a multiple-system SharePoint server farm. For recommended instructions on how to apply updates to SharePoint Server, see Deploy software updates for SharePoint 2013.

Note for Microsoft Office Web Apps Server 2013 Applying Office Web Apps Server updates by using the automatic updates process is not supported with Office Web Apps Server. For recommended instructions on how to apply updates to Office Web Apps Server, see Apply software updates to Office Web Apps Server.

SharePoint Server 2007 (all editions) and Windows SharePoint Services 3.0 (all versions)

Reference Table

The following table contains the security update information for this software.

Security update file name

For Microsoft SharePoint Server 2007 (32-bit editions) and Microsoft Windows SharePoint Services 3.0 (32-bit versions):
sts2007-kb2837616-fullfile-x86-glb.exe

 

For Microsoft SharePoint Server 2007 (32-bit editions):
dlcapp2007-kb2596902-fullfile-x86-glb.exe
dlc2007-kb2596763-fullfile-x86-glb.exe

 

For Microsoft SharePoint Server 2007 (64-bit editions) and Microsoft Windows SharePoint Services 3.0 (64-bit versions):
sts2007-kb2837616-fullfile-x64-glb.exe

 

For Microsoft SharePoint Server 2007 (64-bit editions):
dlcapp2007-kb2596902-fullfile-x64-glb.exe
dlc2007-kb2596763-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File information

For Microsoft SharePoint Server 2007 and Microsoft Windows SharePoint Services 3.0:
See Microsoft Knowledge Base Article 2837616

 

For Microsoft SharePoint Server 2007:
See Microsoft Knowledge Base Article 2596902 and Microsoft Knowledge Base Article 2596763

Registry key verification

Not applicable

 

SharePoint Server 2010 (all editions) and SharePoint Foundation 2010 (all versions)

Reference Table

The following table contains the security update information for this software.

Security update file name

For Microsoft SharePoint Server 2010 and Microsoft SharePoint Foundation 2010:
wss2010-kb2837588-fullfile-x64-glb.exe

 

For Microsoft SharePoint Server 2010:
coreserver2010-kb2837598-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File information

For Microsoft SharePoint Server 2010 and Microsoft SharePoint Foundation 2010:
Microsoft Knowledge Base Article 2837588

 

For Microsoft SharePoint Server 2010:
Microsoft Knowledge Base Article 2837598

Registry key verification

Not applicable

 

SharePoint Server 2013 (all editions) and SharePoint Foundation 2013 (all versions)

Reference Table

The following table contains the security update information for this software.

Security update file name

For Microsoft SharePoint Server 2013 and Microsoft SharePoint Foundation 2013:
sts2013-kb2863856-fullfile-x64-glb.exe
wssloc2013-kb2863863-fullfile-x64-glb.exe

 

For Microsoft SharePoint Server 2013:
coreserverloc2013-kb2863829-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File information

For Microsoft SharePoint Server 2013 and Microsoft SharePoint Foundation 2013:
See Microsoft Knowledge Base Article 2863856 and Microsoft Knowledge Base Article 2863863

 

For Microsoft SharePoint Server 2013:
See Microsoft Knowledge Base Article 2863829

Registry key verification

Not applicable

 

Office Services and Office Web Apps 2010 (all versions)

Reference Table

The following table contains the security update information for this software.

Security update file name

For supported versions of Microsoft Project Server 2010:
prjsrv2010-kb2863922-fullfile-x64-glb.exe

 

For supported versions of Microsoft Office Web App 2010:
wac2010-kb2880536-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File information

For supported versions of Microsoft Project Server 2010:
See Microsoft Knowledge Base Article 2863922

 

For supported versions of Microsoft Office Web App 2010:
See Microsoft Knowledge Base Article 2880536

Registry key verification

Not applicable

 

Office Services and Office Web Apps Server 2013 (all versions)

Reference Table

The following table contains the security update information for this software.

Security update file name

For supported versions of Microsoft Project Server 2013:
pjsrvloc2013-kb2760236-fullfile-x64-glb.exe

 

For supported versions of Microsoft Office Web Apps Server 2013:
wacserver2013-kb2880453-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File information

For Microsoft Project Server 2013:
Microsoft Knowledge Base Article 2760236

 

For Microsoft Office Web Apps Server 2013:
Microsoft Knowledge Base Article 2880453

Registry key verification

Not applicable

 

SharePoint Server 2013 Client Components SDK and SharePoint Designer (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name

SharePoint Server 2013 Client Components SDK (32-bit version):
spdevsdk2013-kb2863854-fullfile-x86-glb.exe

 

SharePoint Server 2013 Client Components SDK (64-bit version):
spdevsdk2013-kb2863854-fullfile-x64-glb.exe

 

For Microsoft SharePoint Designer 2007:
ewd2007-kb2596861-fullfile-x86-glb.exe
spd2007-kb2596810-fullfile-x86-glb.exe

 

For Microsoft SharePoint Designer 2010 (32-bit versions):
spd2010-kb2810069-fullfile-x86-glb.exe

 

For Microsoft SharePoint Designer 2010 (64-bit versions):
spd2010-kb2810069-fullfile-x64-glb.exe

 

For Microsoft SharePoint Designer 2013 (32-bit versions):
spdcore2013-kb2752096-fullfile-x86-glb.exe
spd2013-kb2863836-fullfile-x86-glb.exe

 

For Microsoft SharePoint Designer 2013 (64-bit versions):
spdcore2013-kb2752096-fullfile-x64-glb.exe
spd2013-kb2863836-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal information

This security update cannot be removed.

File information

SharePoint Server 2013 Client Components SDK:
See Microsoft Knowledge Base Article 2863854

 

For Microsoft SharePoint Designer 2007:
See Microsoft Knowledge Base Article 2596861 and Microsoft Knowledge Base Article 2596810

 

For Microsoft SharePoint Designer 2010:
See Microsoft Knowledge Base Article 2810069

 

For Microsoft SharePoint Designer 2013:
See Microsoft Knowledge Base Article 2752096 and Microsoft Knowledge Base Article 2863836

Registry key verification

Not applicable

 

Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please go to the active protections websites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support

How to obtain help and support for this security update

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (May 13, 2014): Bulletin published.

Page generated 2014-06-25 9:35Z-07:00.
Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft