AD DS and DNS Server Migration: Preparing to Migrate
Bijgewerkt: april 2009
Van toepassing op: Windows Server 2008 R2
Migration of Active Directory Domain Services (AD DS) Server and Domain Name System (DNS) Server includes the following tasks:
Complete the steps or procedures in these sections to plan for and prepare your environment for migration.
Download and install migration tools
Use the following tools to assist migration or to verify that AD DS Server and DNS Server are working after the migration:
DNS snap-in (on the Administrative Tools menu)
Active Directory Users and Computers snap-in (on the Administrative Tools menu)
Domain Controller Diagnostics Tool (Dcdiag.exe). Dcdiag is installed as part of the operating system in Windows Server 2003 and later. You can download a version of the tool for Windows Server 2000 from DCDiag.exe Utility Update (http://go.microsoft.com/fwlink/?LinkId=134759). Be sure to use a version of the tool that is compatible with your operating system. For instructions for using Dcdiag, see Domain Controller Diagnostics Tool (dcdiag.exe) (http://go.microsoft.com/fwlink/?LinkId=130631).
Dnslint. To download Dnslint, see article 321045 in the Microsoft Knowledge Base (http://support.microsoft.com/kb/321045).
Convergence Verification Script (DNSconvergeCheck.cmd). This script is available as part of Windows Server 2008 R2 Migration Utilities that you can download from the Microsoft Connect Web site (http://go.microsoft.com/fwlink/?LinkId=135502).
Complete the following steps or procedures to prepare for or plan a migration of AD DS Server and DNS Server from the source server to the destination server:
Before you attempt the procedures in this guide, introduce Windows Server 2008 R2 to your enterprise by installing a new Windows Server 2008 R2 domain controller elsewhere in your domain. This domain controller does not have to be or become the destination server. For more information, see Performing the Upgrade of Active Directory Domains to Windows Server 2008 AD DS Domains (http://go.microsoft.com/fwlink/?LinkId=134766).
Identify your source server and destination server.
Ensure that the destination server has adequate capacity to be a domain controller. For more information, see Assess Hardware Requirements (http://go.microsoft.com/fwlink/?LinkId=134767).
Before migration, install all critical updates and service packs on the source server that were released before Windows Server 2008 R2. It is a recommended best practice that all current critical updates and service packs be installed on both the source and the destination servers.
Ensure that the source DNS server is functioning properly by using the Dcdiag.exe and Dnslint.exe tools:
Verify that the core DNS configuration requirements exist on the source server by running the following dcdiag command:
dcdiag /test:dns /s:<source server>
Note Throughout this guide, commands are formatted so that you can click Copy Code and copy the command string to your computer’s clipboard for convenient pasting into Windows PowerShell™ or another command-line tool.
Ensure that the DNS resource records that are required for successful Active Directory replication are properly registered by running one of the following dnslint commands:
If your source server is running the Server Core installation option of the Windows Server 2008 or Windows Server 2008 R2 operating systems, run the following command:
dnslint /ad /s <source server IP address> /v /no_open
If your source server is running the full installation option of the Windows Server 2008 or Windows Server 2008 R2 operating systems—that is, Internet Explorer is available to display the dnslint report—run the following command:
dnslint /ad /s <source server IP address> /v
The total number of alias (CNAME) resource records on this server. This should be a nonzero value that correlates to the number of domain controllers in the entire forest.
The total number of alias (CNAME) resource records that are missing on this server. This number should be zero. It is indicative of either dynamic update failures or lack of replication convergence due to either an error or anticipated latency.
- If your source server is running the Server Core installation option of the Windows Server 2008 or Windows Server 2008 R2 operating systems, run the following command:
- Verify that the core DNS configuration requirements exist on the source server by running the following dcdiag command:
Count the number of network adapters in the source server and the destination server. You must ensure that both the source server and the destination server have the same number of network adapters. If the source server has multiple network adapters and the service is bound and serving IP addresses on different subnets, the destination server that has the AD DS Server and DNS Server roles must also have multiple network adapters, so that the destination server can serve the same subnets as the source server.
Note This step does not apply to migration of either AD DS Server or DNS Server to virtual machines (VMs).
Decide how you will populate the Active Directory database on the destination server. This operation takes place when AD DS is installed on the destination server and that server becomes a domain controller. You can populate the database by replicating the contents of the directory from another domain controller over the network or by providing a copy of the directory on portable media with the install from media (IFM) option. For large directories, IFM can provide significant time savings. For more information about creating IFM installation media, see Create Installation Media by Using Ntdsutil (http://go.microsoft.com/fwlink/?LinkId=134769).
Note Installation media for a Windows Server 2008 R2 domain controller can be created only from another Windows Server 2008 R2 domain controller within the same domain. Installation media that is created on older versions of Windows Server cannot be consumed by Windows Server 2008 R2. Therefore, your first Windows Server 2008 R2 domain controller will have to replicate over the network, rather than from IFM media.
Obtain the Convergence Verification Script (http://go.microsoft.com/fwlink/?LinkId=135502). During migration you can use the Convergence Verification Script to verify that DNS records have been synchronized.
Prepare a migration store file location. The store location must be accessible from the source server during the export and from the destination server during the import. Use a common drive that can contain all the information for AD DS Server and DNS Server from the source server. The storage location should be similar to the following: \\fileserver\users\username\.
Back up your source server
Make a final backup of the source server. The backup should be an Active Directory or DNS backup, not a Windows backup, which backs up the entire system. AD DS Server or DNS Server backup instructions are available at Windows Server Backup Step-by-Step Guide for Windows Server 2008 (http://go.microsoft.com/fwlink/?LinkID=128732).
Prepare your source server
The information that you need to migrate the source server is organized in AD DS and DNS Server Migration: Appendix A - Migration Data Collection Worksheet. Use the worksheet to identify the migration data to use during migration. You should complete these steps and update the worksheet with all the necessary data before you begin the migration process. Some data or settings are collected and used during the migration. Some data or settings are collected and documented for later use in verification. Use the worksheet in AD DS and DNS Server Migration: AD DS and DNS Server Migration: Appendix B - Migration Verification Worksheet for verifying the success of your migration. If you determine that your particular migration does not require the collection of certain data or settings, you can delete them from your final worksheet or mark them “Not Applicable (N/A).”
After you collect the worksheet information, you are ready to begin preparing the destination server for the migration, as described in the next section.
Prepare your destination server
Prepare for migration by installing the Windows Server 2008 R2 operating system on the destination server. Choose the installation options for AD DS on the destination server, as indicated in the following section, to prepare the destination server for migration.
|If the destination server is the first x64-based Windows Server 2008 R2 server in your domain, follow the procedures for installing the first domain controller in a domain, as described in Performing the Upgrade of Active Directory Domains to Windows Server 2008 AD DS Domains (http://go.microsoft.com/fwlink/?LinkID=134766).|
Install and configure the Windows Server 2008 R2 operating system.
Assign the server a temporary name. This name will be replaced late in the migration process.
Assign the server a temporary IP address. This address will be replaced late in the migration process.
Join the destination server as a member server to the same domain as the source server. For instructions for joining a domain from a Server Core installation of the operating system, see the Server Core Installation Option of Windows Server 2008 Step-by-Step Guide (http://go.microsoft.com/fwlink/?LinkId=149254).
Important Do not run Dcpromo at this time because the destination server must be a member server at this point in the migration process.
Additional migration strategy decisions
After you collect all the worksheet data, there may be additional decisions to make regarding possible modification of your network topology. These decisions can involve your total migration strategy:
Determine whether you will remove the source server or retain it as a member server.
If the source server has operations master roles (also known as flexible single master operations or FSMO roles), determine which operations master roles will be given to other computers and which roles will go to the destination server.
If the source server has other server roles, determine which server roles will go to other computers and which server roles will go to the destination server, along with the order of their migration.
For read-only domain controllers (RODCs) and global catalog domain controllers, determine whether your destination server will also be an RODC or a global catalog server.
ConceptsActive Directory Domain Services and DNS Server Migration Guide
AD DS and DNS Server Migration: Migrating the AD DS and DNS Server Roles
AD DS and DNS Server Migration: Verifying the Migration
AD DS and DNS Server Migration: Post-Migration Tasks
AD DS and DNS Server Migration: Appendix A - Migration Data Collection Worksheet
AD DS and DNS Server Migration: Appendix B - Migration Verification Worksheet
AD DS and DNS Server Migration: Appendix C - Stand-Alone DNS Migration