Share via


RAS Connection

Applies To: Windows Server 2008 R2

A server running Routing and Remote Access provides two different types of remote access connectivity: virtual private networking (VPN) and dial-up networking. VPN is the creation of secured, point-to-point connections across a private network or a public network, such as the Internet. A VPN client uses special TCP/IP-based protocols called tunneling protocols to make a virtual call to a virtual port on a VPN server. In dial-up networking, a remote access client makes a nonpermanent, dial-up connection to a physical port on a remote access server by using the service of a telecommunications provider, such as analog phone or ISDN. In contrast to dial-up networking, VPN is always a logical, indirect connection between the VPN client and the VPN server over a public network, such as the Internet.

Events

Event ID Source Message

20007

RemoteAccess

Cannot receive initial frame on port: %1 because of the following error: %2 The user has been disconnected.

20014

RemoteAccess

The user: %1 has connected and failed to authenticate on port: %2. The line has been disconnected.

20049

RemoteAccess

The user connected to port: %1 has been disconnected because the authentication process did not complete within the required amount of time.

20050

RemoteAccess

The user: %1 connected to port: %2 has been disconnected because no network protocols were successfully negotiated.

20073

RemoteAccess

The following error occurred in the Point-to-Point Protocol (PPP) module on port: %1, UserName: %2.

20076

RemoteAccess

The password for user: %1\%2 connected on port: %3 has expired. The line has been disconnected.

20077

RemoteAccess

The account for user: %1\%2 connected on port: %3 has expired. The line has been disconnected.

20078

RemoteAccess

The account for user: %1\%2 connected on port: %3 does not have remote access privilege. The line has been disconnected.

20089

RemoteAccess

The attempt to call back user: %1 on port: %2 at: %3 failed because of the following error: %4

20093

RemoteAccess

The user: %1 has connected and failed to authenticate with a third party on port: %2. The line has been disconnected.

20094

RemoteAccess

The user connected to port: %1 has been disconnected because the following internal authentication error occurred in the third-party security module: %2

20095

RemoteAccess

Cannot receive initial data on port: %1 because of the following error: %2. The user has been disconnected.

20096

RemoteAccess

The user was autheticated as: %1 by the third-party security host module but was authenticated as: %2 by remote access security. The user has been disconnected.

20108

RemoteAccess

Unable to open the port: %1 for use. %2

20109

RemoteAccess

Cannot recognize initial frame received on port: %1. The line has been disconnected.

20110

RemoteAccess

An error occurred in the Point-to-Point Protocol (PPP) module on port: %1 while trying to initiate a connection. %2

20188

RemoteAccess

The user: %1, attempting to connect on: %2, was disconnected because of the following reason: %3

20195

RemoteAccess

The user: %1 has been disconnected on port: %2. %3

20226

RemoteAccess

CoID=%1: The user %2 dialed a connection named %3 which has terminated. The reason code returned on termination is %4.

20227

RemoteAccess

CoID=%1: The user %2 dialed a connection named %3 which has failed. The error code returned on failure is %4.

20247

RemoteAccess

Cannot receive initial frame on port: %1 because of the following error: %2 The user has been disconnected.

20248

RemoteAccess

CoID=%1: The user connected to port %2 has been disconnected due to inactivity.

20249

RemoteAccess

CoID=%1: The user %2 has connected and failed to authenticate on port %3. The line has been disconnected.

20252

RemoteAccess

The user connected to port: %1 has been disconnected because the authentication process did not complete within the required amount of time.

20253

RemoteAccess

The user: %1 connected to port: %2 has been disconnected because no network protocols were successfully negotiated.

20255

RemoteAccess

The following error occurred in the Point-to-Point Protocol (PPP) module on port: %1, UserName: %2.

20256

RemoteAccess

The password for user: %1\%2 connected on port: %3 has expired. The line has been disconnected.

20257

RemoteAccess

The account for user: %1\%2 connected on port: %3 has expired. The line has been disconnected.

20258

RemoteAccess

The account for user: %1\%2 connected on port: %3 does not have remote access privilege. The line has been disconnected.

20259

RemoteAccess

The attempt to call back user: %1 on port: %2 at: %3 failed because of the following error: %4

20260

RemoteAccess

Cannot receive initial data on port: %1 because of the following error: %2. The user has been disconnected.

20261

RemoteAccess

A user was unable to connect on port: %1. No more connections can be made to this remote computer because the computer has exceeded its client license limit.

20262

RemoteAccess

Cannot recognize initial frame received on port: %1. The line has been disconnected.

20270

RemoteAccess

The user: %1, attempting to connect on: %2, was disconnected because of the following reason: %3

20273

RemoteAccess

The user: %1 has been disconnected on port: %2. %3

20276

RemoteAccess

CoId=%1: Layer=%2: SubLayer=%3: The connection attempt failed on port: %4 because of the authentication protocol selected. Check to see if the authentication protocol is supported in the operating systems at the client and server ends of the connection

RRAS Server

Routing and Remote Access Service Infrastructure