Share via


RAS Connection Establishment

Applies To: Windows Server 2008 R2

Remote access involves the establishment of a dial-up or broadband connection with a remote access server. A dial-up client that connects to a server running Routing and Remote Access can be any PPP client. The client must have installed a modem, an analog telephone line or other wide area network (WAN) connection, and remote access software. Virtual private networking (VPN) clients that connect to Routing and Remote Access must be able to send TCP/IP packets to the remote access server over the Internet. Therefore, either a network adapter or modem with an analog telephone line or other WAN connection to the Internet is required.

Events

Event ID Source Message

20220

RasClient

The connection to %1 (<Server Name>) made using device %2 (<Device Name>) was terminated. The error code returned on failure is %3 (<err_code>)

20221

RasClient

ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>/system) has started dialing a <Phone/VPN/DCC/Internet/Broadband> connection using a <per-user/all-user> connection profile named %2 (connectoid-name). The connection settings are: AutoLogon = <Yes/No> UseRasCredentials = <Yes/No> VpnStrategy = <PPTP / PPTP then L2TP / L2TP / L2TP then PPTP / none> DataEncryption = <None / Requested / Require / Max> PrerequisiteEntry = <Previous Connection Dialed> CustomAuthKey = <None / EAP-TLS / etc> AuthRestriction Mask = < >

20222

RasClient

ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>/<system>) is trying to establish a link to the Remote Access Server for the connection named %2 (connectoid-name) using the following device: Server Address/Phone number = <server address/phone number> Device Name = <WAN MiniPort (L2TP) / WAN MiniPort (PPTP) / USB 56K Fax Modem / etc> Media Type = <RASTAPI / Serial / etc> Port = <COM1 / VPN309 /etc>

20223

RasClient

ROUTERLOG_CORR_ID = <CoID> The user (<domain\user>/<system>) has successfully established a link to the Remote Access Server using the following device Server Address/Phone number = <server IP address / phone number> Device Name: <WAN MiniPort (L2TP) / WAN MiniPort (PPTP) / USB 56K Fax Modem / etc> Media Type = <RASTAPI / Serial / etc> Port = <COM1 / VPN309 /etc>

20224

RasClient

ROUTERLOG_CORR_ID = <CoID> The link to the Remote Access Server has been established by user %1 <domain\user>

20225

RasClient

ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>) has dialed a connection named %2 (<connectoid-name>) to the Remote Access Server which has successfully connected. The connection parameters are: TunnelIpAddress = <Internal IP addr of tunnel / None> TunnelIpv6Address = <Internal IPv6 addr of tunnel /None> Dial-in user=<domain\username>

20227

RasClient

ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>) dialed a connection named %2 (<connectoid-name>) which has failed. The error code returned on failure is %3 (<err-code>)

RAS Client

Routing and Remote Access Service Infrastructure