Start-HcsFirmwareCheck

Start-HcsFirmwareCheck

Checks whether a device needs a firmware update.

Sintaxe

Parameter Set: Default
Start-HcsFirmwareCheck [-Force] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descrição detalhada

The Start-HcsFirmwareCheck cmdlet checks whether a device needs a firmware update. The cmdlet automatically updates any firmware that it can update to the latest known firmware. This cmdlet lists all firmware that it cannot update. Contact Microsoft Customer Service and Support about any firmware that this cmdlet cannot update.

This cmdlet runs automatically as a scheduled task on the active controller once a day, but you can also run the cmdlet on an as-needed basis.

Parâmetros

-Force

Força o comando a ser executado sem solicitar a confirmação do usuário.

-Confirm

Solicita que você confirme antes de executar o cmdlet.

-WhatIf

Mostra o que aconteceria se o cmdlet fosse executado. O cmdlet não é executado.

<CommonParameters>

Esse cmdlet dá suporte a parâmetros comuns: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer e -OutVariable. Para obter mais informações, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

O tipo de entrada é o tipo dos objetos que você pode canalizar para o cmdlet.

Saídas

O tipo de saída é o tipo de objeto emitido pelo cmdlet.

• Microsoft.HCS.Management.Patching.HcsFirmwareCheckResult

  The HcsFirmwareCheckResult object has the following properties:

  -- FirmwareStaus FirmwareStatus
  -- IEnumerable<String> MismatchComponents

  The FirmwareStaus enumeration has the following values:

  -- UpToDate
  -- SupportRequired
  -- MaintenanceModeUpdateRequired
  -- UpdateStarted
  -- UpdateRequired

Exemplos

Example 1: Start a firmware check

This command checks the firmware version of a device. The firmware on this device is up to date.

PS C:\> Start-HcsFirmwareCheck

Example 2: Update firmware

This command checks the firmware version of a device. The firmware on this device is not up to date. This command does not specify the Force parameter, and, therefore, the cmdlet prompts you for confirmation before it updates the firmware.

PS C:\> Start-HcsFirmwareCheck

Example 3: Check for firmware updates that require support

This command checks the firmware version of a device. The firmware on this device is not up to date. The cmdlet cannot update some firmware for this device. Contact Customer Service and Support in order to update this item.

PS C:\> Start-HcsFirmwareCheck

Tópicos relacionados

Get-HcsFirmwareVersion