Exportar (0) Imprimir
Expandir Todos
Arp
At
Cd
Cls
Cmd
Del
Dir
Fc
For
Ftp
If
Ldp
Lpq
Lpr
Md
Mmc
Msg
Nlb
Rcp
Rd
Reg
Rem
Ren
Rsh
Rsm
Rss
Sc
Set
Sfc
Ver
Vol
Expand Minimize

Atmadm

Publicado: Abril de 2012

Actualizado: Abril de 2012

Aplica-se a: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2, Windows Server 2008 R2

Monitors connections and addresses that are registered by the ATM Call Manager on an asynchronous transfer mode (ATM) network. You can use atmadm to display statistics for incoming and outgoing calls on ATM adapters. Used without parameters, atmadm displays statistics for monitoring the status of active ATM connections. For examples of how this command can be used, see Examples.

atmadm [/c][/a][/s]

 

Parameter Description

/c

Displays call information for all current connections to the ATM network adapter installed on this computer.

/a

Displays the registered ATM network service access point (NSAP) address for each adapter installed in this computer.

/s

Displays statistics for monitoring the status of active ATM connections.

/?

Displays Help at the command prompt.

  • The atmadm /c command produces output similar to the following:

    
    Windows ATM Call Manager Statistics
    
    ATM Connections on Interface : [009] Olicom ATM PCI 155 Adapter
    
       Connection   VPI/VCI   Remote Address/
                              Media Parameters (rates in bytes/sec)
       In  PMP SVC    0/193   47000580FFE1000000F21A2E180020481A2E180B
                              Tx:UBR,Peak 0,Avg 0,MaxSdu 1516
                              Rx:UBR,Peak 16953936,Avg 16953936,MaxSdu 1516
       Out P-P SVC    0/192   47000580FFE1000000F21A2E180020481A2E180B
                              Tx:UBR,Peak 16953936,Avg 16953936,MaxSdu 1516
                              Rx:UBR,Peak 16953936,Avg 16953936,MaxSdu 1516
       In  PMP SVC    0/191   47000580FFE1000000F21A2E180020481A2E180B
                              Tx:UBR,Peak 0,Avg 0,MaxSdu 1516
                              Rx:UBR,Peak 16953936,Avg 16953936,MaxSdu 1516
       Out P-P SVC    0/190   47000580FFE1000000F21A2E180020481A2E180B
                              Tx:UBR,Peak 16953936,Avg 16953936,MaxSdu 1516
                              Rx:UBR,Peak 16953936,Avg 16953936,MaxSdu 1516
       In  P-P SVC    0/475   47000580FFE1000000F21A2E180000C110081501
                              Tx:UBR,Peak 16953984,Avg 16953984,MaxSdu 9188
                              Rx:UBR,Peak 16953936,Avg 16953936,MaxSdu 9188
       Out PMP SVC    0/194   47000580FFE1000000F21A2E180000C110081501 (0)
                              Tx:UBR,Peak 16953984,Avg 16953984,MaxSdu 9180
                              Rx:UBR,Peak 0,Avg 0,MaxSdu 0
       Out P-P SVC    0/474   4700918100000000613E5BFE010000C110081500
                              Tx:UBR,Peak 16953984,Avg 16953984,MaxSdu 9188
                              Rx:UBR,Peak 16953984,Avg 16953984,MaxSdu 9188
       In  PMP SVC    0/195   47000580FFE1000000F21A2E180000C110081500
                              Tx:UBR,Peak 0,Avg 0,MaxSdu 0
                              Rx:UBR,Peak 16953936,Avg 16953936,MaxSdu 9180
    
    
    The following table contains descriptions of each element in the atmadm /c sample output.

     

    Type of Data Screen Display Description

    Connection Information

    In/Out

    Direction of the call. In is to the ATM network adapter from another device. Out is from the ATM network adapter to another device.

     

    PMP

    Point-to-multipoint call.

     

    P-P

    Point-to-point call.

     

    SVC

    Connection is on a switched virtual circuit.

     

    PVC

    Connection is on a permanent virtual circuit.

    VPI/VCI Information

    VPI/VCI

    Virtual path and virtual channel of the incoming or outgoing call.

    Remote Address/Media Parameters

    47000580FFE1000000F21A2E180000C110081500

    NSAP address of the calling (In) or called (Out) ATM device.

     

    Tx

    The Tx parameter includes the following three elements:

    • Default or specified bit-rate type (UBR, CBR, VBR, or ABR)

    • Default or specified line speed

    • Specified service data unit (SDU) size

     

    Rx

    The Rx parameter includes the following three elements:

    • Default or specified bit-rate type (UBR, CBR, VBR, or ABR)

    • Default or specified line speed

    • Specified SDU size

  • The atmadm /a command produces output similar to the following:

    
    Windows ATM Call Manager Statistics
    
    ATM Addresses for Interface : [009] Olicom ATM PCI 155 Adapter
    
    47000580FFE1000000F21A2E180000C110081500
    
    
  • The atmadm /s command produces output similar to the following:

    
    Windows ATM Call Manager Statistics
    
    ATM Call Manager statistics for Interface : [009] Olicom ATM PCI 155 Adapter
    
    Current Active calls                        = 4
    Total successful Incoming calls             = 1332
    Total successful Outgoing calls             = 1297
    Unsuccessful Incoming calls                 = 1
    Unsuccessful Outgoing calls                 = 1
    Calls Closed by Remote                      = 1302
    Calls Closed Locally                        = 1323
    Signalling and ILMI Packets Sent            = 33655
    Signalling and ILMI Packets Received        = 34989
    
    
    The following table contains descriptions of each element in the atmadm /s sample output.

     

    Call Manager Statistic Description

    Current Active calls

    Calls currently active on the ATM adapter installed on this computer.

    Total successful Incoming calls

    Calls successfully received from other devices on this ATM network.

    Total successful Outgoing calls

    Calls successfully completed to other ATM devices on this network from this computer.

    Unsuccessful Incoming calls

    Incoming calls that failed to connect to this computer.

    Unsuccessful Outgoing calls

    Outgoing calls that failed to connect to another device on the network.

    Calls Closed by Remote

    Calls closed by a remote device on the network.

    Calls Closed Locally

    Calls closed by this computer.

    Signaling and ILMI Packets Sent

    Number of integrated local management interface (ILMI) packets sent to the switch to which this computer is attempting to connect.

    Signaling and ILMI Packets Received

    Number of ILMI packets received from the ATM switch.

To display call information for all current connections to the ATM network adapter installed on this computer, type:

atmadm /c

To display the registered ATM network service access point (NSAP) address for each adapter installed in this computer, type:

atmadm /a

To display statistics for monitoring the status of active ATM connections, type:

atmadm /s

Considera isto útil?
(1500 caracteres restantes)
Obrigado pelos seus comentários

Conteúdo da Comunidade

Adicionar
Mostrar:
© 2014 Microsoft