Security Bulletin

Microsoft Security Bulletin MS07-023 - Critical

Vulnerabilities in Microsoft Excel Could Allow Remote Code Execution (934233)

Published: May 08, 2007 | Updated: May 17, 2007

Version: 1.2

Summary

Who Should Read this Document: Customers who use Microsoft Excel

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Critical

Recommendation: Customers should apply the update immediately

Security Update Replacement: This bulletin replaces a prior security update. See the Frequently Asked Questions (FAQ) section of this bulletin for details.

Caveats: Microsoft Knowledge Base Article 934233 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 934233.

Tested Software and Security Update Download Locations:

Affected Software:

Non-Affected Software:

  • Microsoft Works Suites:
    • Microsoft Works Suite 2004
    • Microsoft Works Suite 2005
    • Microsoft Works Suite 2006

The software in this list has been tested to determine whether the versions are affected. Other versions are either past their support life cycle or are not affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

General Information

Executive Summary

Executive Summary:

This update resolves several newly discovered, privately reported vulnerabilities. Each vulnerability is documented in its own subsection in the Vulnerability Details section of this bulletin.

We recommend that customers apply the update immediately.

Severity Ratings and Vulnerability Identifiers:

Vulnerability Identifiers Impact of Vulnerability Microsoft Excel 2000 Service Pack 3 Microsoft Excel 2002 Service Pack 3 Microsoft Excel 2003 Service Pack 2 Microsoft Excel 2003 Viewer Microsoft Office Excel 2007 and Microsoft Office Compatibility Pack Microsoft Office 2004 for Mac
Excel BIFF Record Vulnerability - CVE-2007-0215 Remote Code Execution Critical Important Important Important None None
Excel Set Font Vulnerability - CVE-2007-1203 Remote Code Execution Critical Important Important Important Important Important
Excel Filter Record Vulnerability CVE-2007-1214 Remote Code Execution Critical Important Important Important None Important
Aggregate Severity of All Vulnerabilities Critical Important Important Important Important Important

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.

What are the known issues that customers may experience when they install this security update?
Microsoft Knowledge Base Article 934233 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 934233.

Why does this update address several reported security vulnerabilities?
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers can install only this update.

What updates does this release replace?
This security update replaces a prior security update. The security bulletin ID and affected software is listed in the following table.

Bulletin ID Microsoft Excel 2000 Service Pack 3 Microsoft Excel 2002 Service Pack 3 Microsoft Excel 2003 Service Pack 2 and the Microsoft Excel 2003 Viewer Microsoft Office Excel 2007 and the Microsoft Office Compatibility Pack Microsoft Office 2004 for Mac
MS07-002 Replaced Replaced Replaced Not applicable Replaced

Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?
The following table provides the MBSA detection summary for this security update.

Software MBSA 1.2.1 MBSA 2.0.1
Microsoft Excel 2000 Service Pack 3 Yes No
Microsoft Excel 2002 Service Pack 3 Yes Yes
Microsoft Excel 2003 Service Pack 2 Yes Yes
Microsoft Excel 2003 Viewer Yes Yes
Microsoft Office Excel 2007 Yes Yes
Microsoft Office Compatibility Pack Yes Yes
Microsoft Office 2004 for Mac No No

Note MBSA 1.2.1 uses an integrated version of the Office Detection Tool (ODT) which does not support remote scans of this security update. For more information about MBSA, visit the MBSA Web site.

For more information about MBSA, visit the MBSA Web site. For more information about the programs that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Can I use Systems Management Server (SMS) to determine whether this update is required?
The following table provides the SMS summary for this security update.

Software SMS 2.0 SMS 2003
Microsoft Excel 2000 Service Pack 3 Yes No
Microsoft Excel 2002 Service Pack 3 Yes Yes
Microsoft Excel 2003 Service Pack 2 Yes Yes
Microsoft Excel 2003 Viewer Yes Yes
Microsoft Office Excel 2007 Yes Yes
Microsoft Office Compatibility Pack Yes Yes
Microsoft Office 2004 for Mac No No

SMS uses MBSA for detection. Therefore, SMS has the same limitation that is listed earlier in this bulletin related to programs that MBSA does not detect. For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool, can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about the Security Update Inventory Tool, visit the following Microsoft Web site. For more information about the limitations of the Security Update Inventory Tool, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 Inventory Tool for Microsoft Updates, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

Note If you have used an Administrative Installation Point (AIP) for deploying Office 2000, Office XP or Office 2003, you may not be able to deploy the update using SMS if you have updated the AIP from the original baseline.

  • For more information about how to change the source for a client computer from an updated administrative installation point to an Office 2000 original baseline source or Service Pack 3 (SP3), see Microsoft Knowledge Base Article 932889.
  • For more information on how to change the source for a client computer from an updated administrative installation point to an Office XP original baseline source or Service Pack 3 (SP3), see Microsoft Knowledge Base Article 922665.
  • For more information about how to change the source for a client computer from an updated administrative installation point to an Office 2003 original baseline source or Service Pack 2 (SP2), see Microsoft Knowledge Base Article 902349.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Vulnerability Details

Excel BIFF Record Vulnerability - CVE-2007-0215:

A remote code execution vulnerability exists in the way Excel handles files with malformed BIFF records. Such a file might be included in an e-mail attachment or hosted on a malicious Web site. An attacker could exploit the vulnerability by constructing a specially crafted Excel file that could allow remote code execution.

Mitigating Factors for Excel BIFF Record Vulnerability - CVE-2007-0215:

  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • In a Web-based attack scenario, an attacker would have to host a Web site that contains an Office file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.
  • The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful a user must open an attachment that is sent in an e-mail message.
  • Users who have installed and are using the Office Document Open Confirmation Tool for Office 2000 will be prompted with Open, Save, or Cancel before opening a document. The features of the Office Document Open Confirmation Tool are incorporated in Office XP and Office 2003.

Workarounds for Excel BIFF Record Vulnerability - CVE-2007-0215:

Do not open or save Microsoft Excel files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for Excel BIFF Record Vulnerability - CVE-2007-0215:

What is the scope of the vulnerability?
A remote code execution vulnerability exists in the way Excel handles Excel files with malformed BIFF records. An attacker could exploit the vulnerability by constructing a specially crafted Excel file that could allow remote code execution.

What causes the vulnerability?
The vulnerability is caused by Excel not correctly handling Excel files with malformed BIFF records, which could result in the corruption of memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could cause arbitrary code to run with the privileges of the user who opened the file.

How could an attacker exploit the vulnerability?
In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially-crafted file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains an Excel file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way that Excel handles malformed BIFF records.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Excel Set Font Vulnerability - CVE-2007-1203:

A remote code execution vulnerability exists in the way Excel handles Excel files with specially crafted set font values. Such a file might be included in an e-mail attachment or hosted on a malicious Web site. An attacker could exploit the vulnerability by constructing a specially crafted Excel file that could allow remote code execution.

Mitigating Factors for Excel Set Font Vulnerability - CVE-2007-1203:

  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • In a Web-based attack scenario, an attacker would have to host a Web site that contains an Office file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.
  • The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful a user must open an attachment that is sent in an e-mail message.
  • Users who have installed and are using the Office Document Open Confirmation Tool for Office 2000 will be prompted with Open, Save, or Cancel before opening a document. The features of the Office Document Open Confirmation Tool are incorporated in Office XP and Office 2003.

Workarounds for Excel Set Font Vulnerability - CVE-2007-1203:

Do not open or save Microsoft Excel files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for Excel Set Font Vulnerability - CVE-2007-1203:

What is the scope of the vulnerability?
A remote code execution vulnerability exists in the way Excel handles Excel files with specially crafted set font values. Such a file might be included in an e-mail attachment or hosted on a malicious Web site. An attacker could exploit the vulnerability by constructing a specially crafted Excel file that could allow remote code execution.

If a user were logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less affected than users who operate with administrative user rights.

What causes the vulnerability?
The vulnerability is caused by Excel not correctly handling Excel files with a specially crafted set font value, which will results in the corruption of memory.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could cause arbitrary code to run with the privileges of the user who opened the file.

How could an attacker exploit the vulnerability?
In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially-crafted file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains an Excel file that is used to attempt to exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site and open an Excel file. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers that have Microsoft Excel installed are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way that Excel handles set font values before passing it to the allocated buffer.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Excel Filter Record Vulnerability CVE-2007-1214:

A remote code execution vulnerability exists in the way Excel handles Excel files with specially crafted filter records. Such a file might be included in an e-mail attachment or hosted on a malicious Web site. An attacker could exploit the vulnerability by constructing a specially crafted Excel file that could allow remote code execution.

Mitigating Factors for Excel Filter Record Vulnerability CVE-2007-1214:

  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • In a Web-based attack scenario, an attacker would have to host a Web site that contains an Office file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.
  • The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful a user must open an attachment that is sent in an e-mail message.
  • Users who have installed and are using the Office Document Open Confirmation Tool for Office 2000 will be prompted with Open, Save, or Cancel before opening a document. The features of the Office Document Open Confirmation Tool are incorporated in Office XP and Office 2003.

Workarounds for Excel Filter Record Vulnerability CVE-2007-1214:

Do not open or save Microsoft Excel files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for Excel Filter Record Vulnerability CVE-2007-1214:

What is the scope of the vulnerability?
A remote code execution vulnerability exists in the way Excel handles Excel files with specially crafted values. Such a file might be included in an e-mail attachment or hosted on a malicious Web site. An attacker could exploit the vulnerability by constructing a specially crafted Excel file that could allow remote code execution.

If a user were logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less affected than users who operate with administrative user rights.

What causes the vulnerability?
When Excel opens a specially crafted Excel file with a specially crafted filter record, it may corrupt memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could cause arbitrary code to run with the privileges of the user who opened the file.

How could an attacker exploit the vulnerability?
In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially-crafted file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains an Excel file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way that Excel validates filter records before passing it to the allocated buffer.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Security Update Information

Affected Software:

For information about the specific security update for your affected software, click the appropriate link:

Excel 2000

Prerequisites and Additional Update Details

Important Before you install this update, make sure that the following requirements have been met:

  • Microsoft Windows Installer 2.0 must be installed. Microsoft Windows Server 2003, Windows XP, and Microsoft Windows 2000 Service Pack 3 (SP3) include Windows Installer 2.0 or a later version. To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

Windows Installer 2.0 for Windows 95, Windows 98, Windows 98 SE, and Windows Millennium Edition

Windows Installer 2.0 for Windows 2000 and Windows NT 4.0

For more information about how to determine the version of Office 2000 that is installed on your computer, see Microsoft Knowledge Base Article 255275.

Inclusion in Future Service Packs

There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.

Restart Requirement

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal Information

After you install the update, you cannot remove it. To revert to an installation before the update was installed; you must remove the application, and then install it again from the original CD-ROM.

Automated Client Installation Information

Office Update Web Site

We recommend that you install the Microsoft Office 2000 client updates by using the Office Update Web site. The Office Update Web site detects which installation you have and prompts you to install exactly what you must have to make sure that your installation is completely up to date.

To have the Office Update Web site detect the updates that you must install on your computer, visit the Office Update Web site, and then click Office Update in the “Get updates now” section located in the upper right region of the Web page. After detection is complete, you will receive a list of recommended updates for your approval. Click Agree and Install to complete the process.

Manual Client Installation Information

For detailed information about how to manually install this update, review the following section.

Installation Information

The security update supports the following setup switches.

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the computer after installation.
/r:I Prompts the user to restart the computer if a restart is required, except when used with /q:a.
/r:a Always restarts the computer after installation.
/r:s Restarts the computer after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note These switches do not necessarily work with all updates. If a switch is not available, that functionality is required for the correct installation of the update. Also, using the /n:v switch is unsupported and may result in an unbootable system. If the installation is unsuccessful, you should contact your support professional to understand why it could not install.

For more information about the supported setup switches, see Microsoft Knowledge Base Article 197147.

Note The full file office update is intended for both client and administrative deployment scenarios.

Client Deployment Information

  1. Download this security update for Excel 2000.
  2. Click Save this program to disk, and then click OK.
  3. Click Save.
  4. Using Windows Explorer, find the folder that contains the saved file, and then double-click the saved file.
  5. If you are prompted to install the update, click Yes.
  6. Click Yes to accept the License Agreement.
  7. Insert your original source CD-ROM when you are prompted to do so, and then click OK.
  8. When you receive a message that states the installation was successful, click OK.

Note If the security update is already installed on your computer, you receive the following error message: This update has already been applied or is included in an update that has already been applied.

Client Installation File Information

The English version of this update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Excel 2000:

File Name Version Date Time Size
Excel.exe 9.0.0.8961 21-Mar-2007 21:42 7,233,581

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the frequently asked question, “Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?” in the section, Frequently Asked Questions (FAQ) Related to This Security Update, earlier in this bulletin.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.

  2. In the Search Results pane, click All files and folders under Search Companion.

  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Administrative Installation Information

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your computer.

Installation Information

The following setup switches are relevant to administrative installations as they allow an administrator to customize how the files are extracted from the security update.

Switch Description
/? Displays the command-line options.
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.

For more information about the supported setup switches, see Microsoft Knowledge Base Article 197147.

Administrative Deployment Information

To update your administrative installation, follow these steps:

  1. Download this security update for Excel 2000.

  2. Click Save this program to disk, and then click OK.

  3. Click Save.

  4. Using Windows Explorer, locate the folder that contains the saved file. Click Start, click Run, type the following command, and then click OK to extract the .msp file: [path\name of EXE file] /c /t:C:\AdminUpdate

    Note Double-clicking the .exe file does not extract the .msp file; it applies the update to the local computer. In order to update an administrative image, you must first extract the .msp file.

  5. Click Yes to accept the License Agreement.

  6. Click Yes if you are prompted to create the folder.

  7. If you are familiar with the procedure for updating your administrative installation, click Start, click Run, type the following command, and then click OK:

    msiexec /a Admin Path**\**MSI File **/p C:\AdminUpdate\**MSP File SHORTFILENAMES=TRUE

    Note Admin Path is the path of your administrative installation point for your application (for example, C:\Office2000), MSI File is the .msi database package for the application (for example, Data1.msi), and MSP File is the name of the administrative update (for example, SHAREDff.msp).

    Note You can append /qb+ to the command line so that the Administrative Installation dialog box and the End User License Agreement dialog box do not appear.

  8. Click Next in the provided dialog box. Do not change your CD key, installation location, or company name in the provided dialog box.

  9. Click I accept the terms in the License Agreement, and then click Install.

At this point, your administrative installation point is updated. Next, you must update the workstations configurations that were originally installed from this administrative installation. To do this, please review the following “Workstation Deployment Information” subsection. Any new installations that you run from this administrative installation point will include the update.

Warning Any workstation configuration that was originally installed from this administrative installation before you installed the update cannot use this administrative installation for actions like repairing Office or adding new features until you complete the steps in the following “Workstation Deployment Information” subsection for this workstation.

Workstation Deployment Information

To deploy the update to the client workstations, click Start, click Run, type the following command, and then click OK:

msiexec /I Admin Path**\**MSI File **/qb REINSTALL=**Feature List REINSTALLMODE=vomu

Note Admin Path is the path of your administrative installation point for your application (for example, C:\Office2000), MSI File is the .msi database package for the application (for example, Data1.msi), and Feature List is the list of feature names (case sensitive) that must be reinstalled for the update.

To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
O9EXL, O9PRM, O9PRO, O9SBE, O9PIPC1, O9PIPC2, O9STD EXCELFiles

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Administrative Installation File Information

The English version of this update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Excel 2000:

File Name Version Date Time Size
Excel.exe 9.0.0.8961 21-Mar-2007 21:42 7,233,581

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the frequently asked question, “Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?” in the section, Frequently Asked Questions (FAQ) Related to This Security Update, earlier in this bulletin.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.

  2. In the Search Results pane, click All files and folders under Search Companion.

  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Excel 2002

Prerequisites and Additional Update Details

Important: Before you install this update, make sure that the following requirements have been met:

  • Microsoft Windows Installer 2.0 must be installed. Microsoft Windows Server 2003, Windows XP, and Microsoft Windows 2000 Service Pack 3 (SP3) include Windows Installer 2.0 or a later version. To install the latest version of the Windows Installer, visit one of the following Microsoft Web sites:

Windows Installer 2.0 for Windows 95, Windows 98, Windows 98 SE, and Windows Millennium Edition

Windows Installer 2.0 for Windows 2000 and Windows NT 4.0

For more information about how to determine the version of Office XP that is installed on your computer, see Microsoft Knowledge Base Article 291331. For more information about the version information displayed in the About dialog box, see Microsoft Knowledge Base Article 328294.

Inclusion in Future Service Packs

There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.

Restart Requirement

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Automated Client Installation Information

Microsoft Update Web Site

This update will be available through the Microsoft Update Web site. Microsoft Update consolidates updates that are provided by Windows Update and Office Update into one location and lets you choose automatic delivery and installation of high-priority and security updates. We recommend that you install this update by using the Microsoft Update Web site. The Microsoft Update Web site detects your particular installation and prompts you to install exactly what you must have to make sure that your installation is completely up to date.

To have the Microsoft Update Web site detect the required updates that you must install on your computer, visit the Microsoft Update Web site. You will be given the choice of Express (Recommended) or Custom. After detection is complete, you will receive a list of recommended updates for your approval. Click Install Updates or Review and Install Updates to complete the process.

Manual Client Installation Information

For detailed information about how to manually install this update, review the following section.

Installation Information

The security update supports the following setup switches.

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the computer after installation.
/r:I Prompts the user to restart the computer if a restart is required, except when used with /q:a.
/r:a Always restarts the computer after installation.
/r:s Restarts the computer after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note These switches do not necessarily work with all updates. If a switch is not available, that functionality is required for the correct installation of the update. Also, using the /n:v switch is unsupported and may result in an unbootable system. If the installation is unsuccessful, you should contact your support professional to understand why it could not install.

For more information about the supported setup switches, see Microsoft Knowledge Base Article 197147.

Note The full file office update is intended for both client and administrative deployment scenarios.

Client Deployment Information

  1. Download this security update for Excel 2002.
  2. Click Save this program to disk, and then click OK.
  3. Click Save.
  4. Using Windows Explorer, find the folder that contains the saved file, and then double-click the saved file.
  5. If you are prompted to install the update, click Yes.
  6. Click Yes to accept the License Agreement.
  7. Insert your original source CD-ROM when you are prompted to do so, and then click OK.
  8. When you receive a message that states the installation was successful, click OK.

Note If the security update is already installed on your computer, you see the following error message: This update has already been applied or is included in an update that has already been applied.

Client Installation File Information

The English version of this update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Excel 2002:

File Name Version Date Time Size
Excel.exe 10.0.6829.0 19-Mar-2007 17:05 9,360,728

Administrative Installation Information

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your computer.

Installation Information

The following setup switches are relevant to administrative installations as they allow an administrator to customize how the files are extracted from within the security update.

Switch Description
/? Displays the command-line options.
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.

For more information about the supported setup switches, see Microsoft Knowledge Base Article 197147.

Administrative Deployment Information

To update your administrative installation, follow these steps:

  1. Download this security update for Excel 2002.

  2. Click Save this program to disk, and then click OK.

  3. Click Save.

  4. Using Windows Explorer, locate the folder that contains the saved file. Click Start, click Run, type the following command, and then click OK to extract the .msp file:

    [path\name of EXE file] /c /t:C:\AdminUpdate

    Note Double-clicking the .exe file does not extract the .msp file; it applies the update to the local computer. In order to update an administrative image, you must first extract the .msp file.

  5. Click Yes to accept the License Agreement.

  6. Click Yes if you are prompted to create the folder.

  7. If you are familiar with the procedure for updating your administrative installation, click Start, click Run, type the following command, and then click OK:

    msiexec /a Admin Path**\**MSI File **/p C:\adminUpdate\**MSP File SHORTFILENAMES=TRUE

    Note Admin Path is the path of your administrative installation point for your application (for example, C:\OfficeXp), MSI File is the .msi database package for the application (for example, Data1.msi), and MSP File is the name of the administrative update (for example, SHAREDff.msp).

    Note You can append /qb+ to the command line so that the Administrative Installation dialog box and the End User License Agreement dialog box do not appear.

  8. Click Next in the provided dialog box. Do not change your CD key, installation location, or company name in the provided dialog box.

  9. Click I accept the terms in the License Agreement, and then click Install.

At this point, your administrative installation point is updated. Next, you must update the workstation configurations that were originally installed from this administrative installation. To do this, see the following “Workstation Deployment Information” subsection. Any new installations that you run from this administrative installation point will include the update.

Warning Any workstation configuration that was originally installed from this administrative installation before you installed the update cannot use this administrative installation for actions like repairing Office or adding new features until you complete the steps in the following “Workstation Deployment Information” subsection for this workstation.

Workstation Deployment Information

To deploy the update to the client workstations, click Start, click Run, type the following command, and then click OK:

msiexec /I Admin Path**\**MSI File **/qb REINSTALL=**Feature List REINSTALLMODE=vomu

Note Admin Path is the path of your administrative installation point for your application (for example, C:\OfficeXP), MSI File is the .msi database package for the application (for example, Data1.msi), and Feature List is the list of feature names (case sensitive) that must be reinstalled for the update.

To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
PIPC1, PROPLUS, PRO, SBE, STD, STDEDU EXCELFiles, WordNonBootFiles
EXCEL EXCELFiles

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization on the Office Admin Update Center. On the home page of that site, look under the Update Strategies section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by the Windows Installer.

Administrative Installation File Information

The English version of this update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Excel 2002:

File Name Version Date Time Size
Excel.exe 10.0.6829.0 19-Mar-2007 17:05 9,360,728

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the frequently asked question, “Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?” in the section, Frequently Asked Questions (FAQ) Related to This Security Update, earlier in this bulletin.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.

  2. In the Search Results pane, click All files and folders under Search Companion.

  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Excel 2003 and Excel 2003 Viewer

Prerequisites and Additional Update Details

Important: Before you install this update, make sure that the following requirements have been met:

  • To update Office 2003, Office 2003 Service Pack 2 must be installed. Before you install this update, install Office 2003 SP2.
  • To update the Office 2003 Excel Viewer, the Excel Viewer 2003 must be installed. Before you install this update, install Office 2003 Excel Viewer.

For more information about how to determine the version of Office 2003 that is installed on your computer, see Microsoft Knowledge Base Article 821549. For more information about the version information displayed in the About dialog box, see Microsoft Knowledge Base Article 328294.

Inclusion in Future Service Packs:

The update for this issue will be included in a future service pack or update rollup.

Restart Requirement

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use Add or Remove Programs in Control Panel.
Note When you remove this update, you may be prompted to insert the Microsoft Office 2003 CD in the CD drive. Additionally, you may not have the option to uninstall the update from Add or Remove Programs in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Automated Client Installation Information

Microsoft Update Web Site

This update will be available through the Microsoft Update Web site. Microsoft Update consolidates updates that are provided by Windows Update and Office Update into one location and lets you choose automatic delivery and installation of high-priority and security updates. We recommend that you install this update by using the Microsoft Update Web site. The Microsoft Update Web site detects your particular installation and prompts you to install exactly what you must have to make sure that your installation is completely up to date.

To have the Microsoft Update Web site detect the required updates that you must install on your computer, visit the Microsoft Update Web site. You will be given the choice of Express (Recommended) or Custom. After detection is complete, you will receive a list of recommended updates for your approval. Click Install Updates or Review and Install Updates to complete the process.

Manual Client Installation Information

For detailed information about how to manually install this update, review the following section.

Installation Information

The security update supports the following setup switches.

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the computer after installation.
/r:I Prompts the user to restart the computer if a restart is required, except when used with /q:a.
/r:a Always restarts the computer after installation.
/r:s Restarts the computer after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note These switches do not necessarily work with all updates. If a switch is not available, that functionality is required for the correct installation of the update. Also, using the /n:v switch is unsupported and may result in an unbootable system. If the installation is unsuccessful, you should contact your support professional to understand why it could not install.

For more information about the supported setup switches, see Microsoft Knowledge Base Article 197147.

Note The full file office update is intended for both client and administrative deployment scenarios.

Client Deployment Information

  1. Download the security updates for Excel 2003 and Excel Viewer 2003.
  2. Click Save this program to disk, and then click OK.
  3. Click Save.
  4. Using Windows Explorer, find the folder that contains the saved file, and then double-click the saved file.
  5. If you are prompted to install the update, click Yes.
  6. Click Yes to accept the License Agreement.
  7. Insert your original source CD-ROM when you are prompted to do so, and then click OK.
  8. When you receive a message that states the installation was successful, click OK.

Note If the security update is already installed on your computer, you receive the following error message: This update has already been applied or is included in an update that has already been applied.

Client Installation File Information

The English version of this update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Excel 2003:

File Name Version Date Time Size
Excel.exe 11.0.8134.0 06-Apr-2007 21:12 10,289,496

Excel Viewer 2003:

File Name Version Date Time Size
XLView.exe 11.0.8133.0 23-Mar-2007 07:50 5,241,696

Administrative Installation Information

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your computer.

Installation Information

The following setup switches are relevant to administrative installations as they allow an administrator to customize how the files are extracted from within the security update.

Switch Description
/? Displays the command-line options.
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.

For more information about the supported setup switches, see Microsoft Knowledge Base Article 197147.

Administrative Deployment Information

To update your administrative installation, follow these steps:

  1. Download the security updates for Excel 2003 and Excel Viewer 2003.

  2. Click Save this program to disk, and then click OK.

  3. Click Save.

  4. Using Windows Explorer, locate the folder that contains the saved file. Click Start, click Run, type the following command, and then click OK to extract the .msp file:

    [path\name of EXE file] /c /t:C:\AdminUpdate

    Note Double-clicking the .exe file does not extract the .msp file; it applies the update to the local computer. In order to update an administrative image, you must first extract the .msp file.

  5. Click Yes to accept the License Agreement.

  6. Click Yes if you are prompted to create the folder.

  7. If you are familiar with the procedure for updating your administrative installation**,** click Start, click Run, type the following command, and then click OK:

    msiexec /a Admin Path**\**MSI File **/p C:\adminUpdate\**MSP File SHORTFILENAMES=TRUE

    Note Admin Path is the path of your administrative installation point for your application (for example, C:\Office2003), MSI File is the .msi database package for the application (for example, Data1.msi), and MSP File is the name of the administrative update (for example, SHAREDff.msp).

    Note You can append /qb+ to the command line so that the Administrative Installation dialog box and the End User License Agreement dialog box do not appear.

  8. Click Next in the provided dialog box. Do not change your CD key, installation location, or company name in the provided dialog box.

  9. Click I accept the terms in the License Agreement, and then click Install.

At this point, your administrative installation point is updated. Next, you must update the workstations configurations that were originally installed from this administrative installation. To do this, please review the following “Workstation Deployment Information” subsection. Any new installations that you run from this administrative installation point will include the update.

Warning Any workstation configuration that was originally installed from this administrative installation before you installed the update cannot use this administrative installation for actions such as repairing Office or adding new features until you complete the steps in the following “Workstation Deployment Information” subsection.

Workstation Deployment Information

To deploy the update to the client workstations, click Start, click Run, type the following command, and then click OK:

Msiexec /I Admin Path**\**MSI File **/qb REINSTALL=**Feature List REINSTALLMODE=vomu

Note Admin Path is the path of your administrative installation point for your application (for example, C:\Office2003), MSI File is the .msi database package for the application (for example, Data1.msi), and Feature List is the list of feature names (case sensitive) that must be reinstalled for the update.

To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
STD11, BASIC11, PERS11, PROI11, PRO11, STDP11, EXCEL11, PRO11SB ALL
XLVIEW ExcelViewer

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization on the Office Admin Update Center. On the home page of that site, look under the Update Strategies section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by the Windows Installer.

Administrative Installation File Information

The English version of this update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Excel 2003:

File Name Version Date Time Size
Excel.exe 11.0.8134.0 06-Apr-2007 21:12 10,289,496

Excel Viewer 2003:

File Name Version Date Time Size
XLView.exe 11.0.8133.0 23-Mar-2007 07:50 5,241,696

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the frequently asked question, “Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?” in the section, Frequently Asked Questions (FAQ) Related to This Security Update, earlier in this bulletin.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.

  2. In the Search Results pane, click All files and folders under Search Companion.

  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Excel 2007 and the Office Compatibility Pack

Prerequisites and Additional Update Details

Important: Before you install this update, make sure that the following requirements have been met:

  • To update the Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats, the Office Compatibility Pack must be installed.
  • Microsoft Windows Installer 3.1 must be installed. Microsoft Windows Server 2003 SP1 includes Windows Installer 3.1 or a later version. To install the latest version of Windows Installer 3.1, visit the following site:

Windows Installer 3.1 Redistributable (v2) on the Microsoft Download Center.

For more information about the version information displayed in the About dialog box, see Microsoft Knowledge Base Article 328294.

Inclusion in Future Service Packs:

The update for this issue will be included in a future service pack.

Restart Requirement

To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use Add or Remove Programs in Control Panel.
Note When you remove this update, you may be prompted to insert the 2007 Microsoft Office system CD in the CD drive. Additionally, you may not have the option to uninstall the update from Add or Remove Programs in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Automated Client Installation Information

Microsoft Update Web Site

This update will be available through the Microsoft Update Web site. Microsoft Update consolidates updates that are provided by Windows Update and Office Update into one location and lets you choose automatic delivery and installation of high-priority and security updates. We recommend that you install this update by using the Microsoft Update Web site. The Microsoft Update Web site detects your particular installation and prompts you to install exactly what you must have to make sure that your installation is completely up to date.

To have the Microsoft Update Web site detect the required updates that you must install on your computer, visit the Microsoft Update Web site. You will be given the choice of Express (Recommended) or Custom. After detection is complete, you will receive a list of recommended updates for your approval. Click Install Updates or Review and Install Updates to complete the process.

Installation Information

For detailed information about how to manually install this update, review the following section.

Installation Information

The security update supports the following setup switches.

Switch Description
/? or /help Displays usage dialog.
/passive Specifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel.
/quiet Specifies quiet mode, or suppresses prompts, when files are being extracted.
/norestart Suppresses restarting the system if the update requires a restart.
/forcerestart Automatically restarts the system after applying the update, regardless of whether the update requires the restart.
/extract Extracts the files without installing them. You are prompted for a target folder.
/extract:<path> Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/lang:<LCID> Forces the use of a specific language, when the update package supports that language.
/log:<log file> Enables logging, by both Vnox and Installer, during the update installation.

Note These switches do not necessarily work with all updates. If a switch is not available, that functionality is required for the correct installation of the update. Also, using the /n:v switch is unsupported and may result in an unbootable system. If the installation is unsuccessful, you should contact your support professional to understand why it could not install.

For more information about the supported setup switches, see Microsoft Knowledge Base Article 197147.

Note The full file office update is intended for both client and administrative deployment scenarios.

Deployment Information

  1. Download the security update for Excel 2007 and the Office Compatibility Pack.
  2. Click Save this program to disk, and then click OK.
  3. Click Save.
  4. Using Windows Explorer, find the folder that contains the saved file, and then double-click the saved file.
  5. If you are prompted to install the update, click Yes.
  6. Click Yes to accept the License Agreement.
  7. Insert your original source CD-ROM when you are prompted to do so, and then click OK.
  8. When you receive a message that states the installation was successful, click OK.

Note If the security update is already installed on your computer, you receive the following error message: This update has already been applied or is included in an update that has already been applied.

Installation File Information

The English version of this update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Excel 2007:

File Name Version Date Time Size
Excel.exe 12.00.6014.5000 23-Mar-2007 07:59 17,682,808

Office 2007 Compatibility Pack:

File Name Version Date Time Size
Excelcnv.exe 12.00.6014.5000 22-Mar-2007 10:16 14,678,392

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the frequently asked question, “Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?” in the section, Frequently Asked Questions (FAQ) Related to This Security Update, earlier in this bulletin.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.

  2. In the Search Results pane, click All files and folders under Search Companion.

  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Office 2004 for Mac

Installation Information:

  1. Quit any applications that are running, including virus-protection applications, all Microsoft Office applications, Microsoft Messenger for Mac, and Office Notifications, because they might interfere with installation.
  2. Open the Microsoft Office 2004 for Mac 11.3.5 Update volume on your desktop. This step might have been performed for you.
  3. To start the update process, in the Microsoft Office 2004 for Mac 11.3.5 Update volume window, double-click the Microsoft Office 2004 for Mac 11.3.5 Update application, and follow the instructions on the screen.
  4. If the installation finishes successfully, you can remove the update installer from your hard disk. To verify that the installation finished successfully, see the following “Verifying Update Installation” subsection. To remove the update installer, first drag the Microsoft Office 2004 for Mac 11.3.5 Update volume to the Trash, and then drag the file that you downloaded to the Trash.

Restart Requirement

This update does not require you to restart your computer.

Removal Information

This update cannot be uninstalled.

Verifying Update Installation

To verify that a security update is installed on an affected system, follow these steps:

  1. In the Finder, navigate to the Application Folder (Microsoft Office 2004: Office).
  2. Select the file, Microsoft Component Plugin.
  3. On the File menu click Get Info or Show Info.

If the Version number is 11.3.5, the update has been successfully installed.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • Manuel Santamarina Suarez, working with TippingPoint and the Zero Day Initiative, for reporting the Excel BIFF Record Vulnerability (CVE-2007-0215)
  • Greg MacManus of iDefense Labs for reporting the Excel Filter Record Vulnerability (CVE-2007-1214)

Obtaining Other Security Updates:

Updates for other security issues are available at the following locations:

Support:

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Security Resources:

Software Update Services:

By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.

For more information about how to deploy security updates by using Software Update Services, visit the Software Update Services Web site.

Windows Server Update Services:

By using Windows Server Update Services (WSUS), administrators can quickly and reliably deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 onto Windows 2000 and later operating systems.

For more information about how to deploy security updates using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server:

Microsoft Systems Management Server (SMS) delivers a highly configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.

Note SMS uses the Microsoft Baseline Security Analyzer, the Microsoft Office Detection Tool, and the Enterprise Update Scan Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

  • V1.0 (May 8, 2007): Bulletin published.
  • V1.1 (May 16, 2007): Bulletin “Installation File Information” section updated with the correct file name for the Office 2007 Compatibility Pack.
  • V1.2 (May 17, 2007): This Bulletin has been revised due to new issues discovered with the security update as reflected in Microsoft Knowledge Base Article 934233.

Built at 2014-04-18T13:49:36Z-07:00