匯出 (0) 列印
全部展開

Installing the RemoteFX Cap Driver

發佈時間: 2011年1月

更新日期: 2011年2月

適用於: Windows Server 2008 R2 with SP1

The RemoteFX cap driver allows you to use a baseboard management controller to view the server console during the BIOS sequence, while in safe mode or when the Windows operating system stops unexpectedly and an error message appears on a blue screen. Installing the RemoteFX cap driver is useful if you need to manage your RemoteFX server remotely using KVM over IP.

Important重要
If you install the RemoteFX cap driver, the integrated video adapter is disabled while the operating system is running.

The following table provides considerations for whether to use the RemoteFX cap driver. Each row is a separate option for how to enable RemoteFX when using a baseboard management controller that uses an XDDM driver.

 

Option Is the console visible by using a KVM?

BIOS

Safe mode

Windows is running

The integrated video adapter that uses an XDDM driver is disabled in the BIOS.

No

No

No. (The server can be viewed by using an RDP connection but not through the baseboard management controller.)

An external KVM is connected to the GPU on the RemoteFX server, which uses a WDDM driver. The integrated video adapter that uses an XDDM driver is disabled in the BIOS.

Yes

Yes

Yes. (The server can be viewed through the external KVM or by using an RDP connection.)

The RemoteFX cap driver is installed and the integrated onboard video adapter remains enabled.

Yes

Yes

No. (The server can be viewed by using an RDP connection but not through the baseboard management controller.)

Before installing the RemoteFX cap driver, the WDDM driver for the video adapter should be installed and RemoteFX should be enabled. When installing the RemoteFX cap driver, ensure that the following steps are completed in order:

  • Enable the baseboard controller in the BIOS per the manufacturer’s instructions.

  • Install the WDDM driver for the video adapter.

  • Enable RemoteFX by using Server Manager.

  • Install the RemoteFX cap driver.

To install the RemoteFX cap driver

  1. From an elevated command prompt, type dism /online /enable-feature /featurename:Microsoft-Windows-RemoteFX-EmbeddedVideoCap-Setup-Package, and then press ENTER.

  2. After the command has completed successfully, restart the RemoteFX server.

    note備註
    If you manage a KVM switch over IP with an onboard management adapter, install the RemoteFX cap driver after you have enabled RemoteFX. The RemoteFX cap driver supports KVM access over IP prior to the point where the Windows operating system loads (so that you can access the BIOS). After the operating system has loaded, you can access the RemoteFX server by using RDP or a non-Microsoft solution to manage the KVM switch over IP.

You may choose to disable the RemoteFX cap driver to troubleshoot issues on the RemoteFX server. To disable the RemoteFX cap driver, type the following at a command prompt: dism /online /disable-feature /featurename:Microsoft-Windows-RemoteFX-EmbeddedVideoCap-Setup-Package, press ENTER, and then restart the computer.

本文對您有任何幫助嗎?
(剩餘 1500 個字元)
感謝您提供意見

社群新增項目

新增
顯示:
© 2014 Microsoft