Share via


Nfsadmin

 

Applies To: Windows Vista, Windows Server 2008, Windows Server 2012, Windows 8

You can use nfsadmin to manage Server for NFS and Client for NFS.

Syntax

nfsadmin server [ComputerName] [-u UserName**[-p Password]]** -l

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** -r {client | all}

nfsadmin server [ComputerName] [-u UserName [-p Password**]] {start | stop}**

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** config Option**[...]**

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** creategroup Name

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** listgroups

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** deletegroup Name

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** renamegroup OldName NewName

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** addmembers Name Host**[...]**

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** listmembers

nfsadmin server [ComputerName] [-u UserName [-p Password**]]** deletemembers Group Host**[...]**

nfsadmin client [ComputerName] [-u UserName [-p Password**]] {start | stop}**

nfsadmin client [ComputerName] [-u UserName [-p Password**]]** config Option**[...]**

Description

The nfsadmin command-line utility administers Server for NFS or Client for NFS on the local or remote computer running Microsoft Services for Network File System (NFS). If you are logged on with an account that does not have the required privileges, you can specify a user name and password of an account that does. The action performed by nfsadmin depends on the command arguments you supply.

In addition to service-specific command arguments and options, nfsadmin accepts the following:

  • ComputerName
    Specifies the remote computer you want to administer. You can specify the computer using a Windows Internet Name Service (WINS) name or a Domain Name System (DNS) name, or by Internet Protocol (IP) address.

  • -u UserName
    Specifies the user name of the user whose credentials are to be used. It might be necessary to add the domain name to the user name in the form domain**\**UserName

  • -p Password
    Specifies the password of the user specified using the -u option. If you specify the -u option but omit the -p option, you are prompted for the user's password.

Administering Server for NFS

Use the nfsadmin server command to administer Server for NFS. The specific action that nfsadmin server takes depends on the command option or argument you specify:

  • -l
    Lists all locks held by clients.

  • -r {client | all}
    Releases the locks held by a client or, if all is specified, by all clients.

  • start
    Starts the Server for NFS service.

  • stop
    Stops the Server for NFS service.

  • config
    Specifies general settings for Server for NFS. You must supply at least one of the following options with the config command argument:

    • **mapsvr=**server
      Sets server as the User Name Mapping server for Server for NFS. Although this option continues to be supported for compatibility with previous versions, you should use the sfuadmin utility instead.

    • auditlocation={eventlog | file | both | none}
      Specifies whether events will be audited and where the events will be recorded. One of the following arguments is required.

      • eventlog
        Specifies that audited events will be recorded only in the Event Viewer application log.

      • file
        Specifies that audited events will be recorded only in the file specified by config fname.

      • both
        Specifies that audited events will be recorded in the Event Viewer application log as well as the file specified by config fname.

      • none
        Specifies that events will not be audited.

    • **fname=**file
      Sets the file specified by file as the audit file. The default is %sfudir%\log\nfssvr.log

    • fsize==size
      Sets size as the maximum size in megabytes of the audit file. The default maximum size is 7 MB.

    • audit=[+|-]mount [+|-]read [+|-]write [+|-]create [+|-]delete [+|-]locking [+|-]all
      Specifies the events to be logged. To start logging an event, type a plus sign (+) before the event name; to stop logging an event, type a minus sign (-) before the event name. If the sign is omitted, the plus sign is assumed. Do not use all with any other event name.

    • **lockperiod=**seconds
      Specifies the number of seconds that Server for NFS will wait to reclaim locks after a connection to Server for NFS has been lost and then reestablished or after the Server for NFS service has been restarted.

    • Portmapprotocol={TCP | UDP | TCP+UDP
      Specifies which transport protocols Portmap supports. The default setting is TCP+UDP.

    • mountprotocol={TCP | UDP | TCP+UDP}
      Specifies which transport protocols mount supports. The default setting is TCP+UDP.

    • nfsprotocol={TCP | UDP | TCP+UDP}
      Specifies which transport protocols Network File System (NFS) supports. The default setting is TCP+UDP

    • nlmprotocol={TCP | UDP | TCP+UDP}
      Specifies which transport protocols Network Lock Manager (NLM) supports. The default setting is TCP+UDP.

    • nsmprotocol={TCP | UDP | TCP+UDP}
      Specifies which transport protocols Network Status Manager (NSM) supports. The default setting is TCP+UDP.

    • enableV3={yes | no}
      Specifies whether NFS version 3 protocols will be supported. The default setting is yes.

    • renewauth={yes | no}
      Specifies whether client connections will be required to be reauthenticated after the period specified by config renewauthinterval. The default setting is no.

    • **renewauthinterval=**seconds
      Specifies the number of seconds that elapse before a client is forced to be reauthenticated if config renewauth is set to yes. The default value is 600 seconds.

    • **dircache=**size
      Specifies the size in kilobytes of the directory cache. The number specified as size must be a multiple of 4 between 4 and 128. The default directory-cache size is 128 KB.

    • translationfile=[file]
      Specifies a file containing mapping information for replacing characters in the names of files when moving them from Windows-based to UNIX-based file systems. If file is not specified, then file name character translation is disabled. If the value of translationfile is changed, you must restart the server for the change to take effect.

    • dotfileshidden={yes | no}
      Specifies whether files that are created with names beginning with a period (.) will be marked as hidden in the Windows file system and consequently hidden from NFS clients. The default setting is no.

    • casesensitivelookups={yes | no}
      Specifies whether directory lookups will be case sensitive (requiring exact matching of character case).

      You also need to disable Windows kernel case-insensitivity in order for Server for NFS to support case-sensitive file names. You can disable Windows kernel case-insensitivity by clearing the following registry key to 0:

      HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel

      DWORD “obcaseinsensitive”

      Important

      This section applies only to Windows Server 2008 R2, Windows Server 2008, and Windows Server 2003. This section does not apply to Windows Server 2012 R2 or Windows Server 2012.

    • ntfscase={lower | upper | preserve}
      Specifies whether the case of characters in the names of files in the NTFS file system will be returned in lowercase, uppercase, or in the form stored in the directory. The default setting is preserve. This setting cannot be changed if casesensitivelookups is set to yes.

  • creategroup name
    Creates a new client group, giving it the specified name.

  • listgroups
    Displays the names of all client groups.

  • deletegroup name
    Removes the client group specified by name.

  • renamegroup OldName NewName
    Changes the name of the client group specified by OldName to NewName

  • addmembers Name Host[...]
    Adds Host to the client group specified by Name.

  • listmembers Name
    Lists the host computers in the client group specified by Name.

  • deletemembers Group Host[...]
    Removes the client specified by Host from the client group specified by Group.

If you do not specify a command option or argument, nfsadmin server displays the current Server for NFS configuration settings.

Administering Client for NFS

Use the nfsadmin client command to administer Client for NFS. The specific action that nfsadmin client takes depends on the command argument you specify:

  • start
    Starts the Client for NFS service.

  • stop
    Stops the Client for NFS service.

  • config
    Specifies general settings for Client for NFS. You must supply at least one of the following options with the config command argument:

    • **fileaccess=**mode

      • Specifies the default permission mode for files created on Network File System (NFS) servers. The mode argument consists of a three digits from 0 to 7 (inclusive) representing the default permissions granted the user, group, and others (respectively). The digits translate to UNIX-style permissions as follows: 0=none, 1=x, 2=w, 3=wx, 4=r, 5=rx, 6=rw, and 7=rwx. For example, fileaccess=750 gives rwx permission to the owner, rx permission to the group, and no access permission to others.
    • **mapsvr=**server
      Sets server as the User Name Mapping server for Client for NFS. Although this option continues to be supported for compatibility with previous versions, you should use the sfuadmin utility instead.

    • mtype={hard | soft}
      Specifies the default mount type. For a hard mount, Client for NFS continues to retry a failed RPC until it succeeds. For a soft mount, Client for NFS returns failure to the calling application after retrying the call the number of times specified by the retry option.

    • **retry=**number
      Specifies the number of times to try to make a connection for a soft mount. This value must be from 1 to 10, inclusive. The default is 1.

    • **timeout=**seconds
      Specifies the number of seconds to wait for a connection (remote procedure call). This value must be 0.8, 0.9, or an integer from 1 to 60, inclusive. The default is 0.8.

    • Protocol={TCP | UDP | TCP+UDP}
      Specifies which transport protocols the client supports. The default setting is TCP+UDP

    • **rsize=**size
      Specifies the size, in kilobytes, of the read buffer. This value can be 0.5, 1, 2, 4, 8, 16, or 32. The default is 32.

    • **wsize=**size
      Specifies the size, in kilobytes, of the write buffer. This value can be 0.5, 1, 2, 4, 8, 16, or 32. The default is 32.

    • perf=default
      Restores the following performance settings to default values:

      • mtype

      • retry

      • timeout

      • rsize

      • wsize

    • **fileaccess=**mode
      Specifies the default permission mode for files created on Network File System (NFS) servers. The mode argument consists of a three digits from 0 to 7 (inclusive) representing the default permissions granted the user, group, and others (respectively). The digits translate to UNIX-style permissions as follows: 0=none, 1=x, 2=w, 3=wx, 4=r, 5=rx, 6=rw, and 7=rwx. For example, fileaccess=750 gives rwx permission to the owner, rx permission to the group, and no access permission to others.

If you do not specify a command option or argument, nfsadmin client displays the current Client for NFS configuration settings.