(Unattended Installation)
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2
Each [adapter_specific_protocol_section] section can contain an entry for specifying a network component. This section must be used in conjunction with the [Networking] section.
Specifies the name of a network component on the computer to which the protocol settings apply.
SpecificTo = network_component_name
Value | Description |
---|---|
network_component_name |
Network adapter name. |
[Networking]
[NetAdapters]
Adapter01 = params.Adapter01
Adapter02 = params.Adapter02
[params.Adapter01]
INFID = "pci\ven_0e11&dev_ae32"
[params.Adapter02]
INFID = "pci\ven_8086&dev_1229&subsys_00018086"
[NetClients]
MS_MSClient = params.MS_MSClient
[params.MS_MSClient]
[NetProtocols]
MS_TCPIP = params.MS_TCPIP
[params.MS_TCPIP]
AdapterSections = params.MS_TCPIP.Adapter01,params.MS_TCPIP.Adapter02
[params.MS_TCPIP.Adapter01]
DHCP = Yes
SpecificTo = Adapter01
[params.MS_TCPIP.Adapter02]
DefaultGateway = 192.168.1.1
DHCP = No
IPAddress = 192.168.1.2
SpecificTo = Adapter02
SubnetMask = 255.255.255.0
WINS = No
[NetServices]
MS_Server = params.MS_Server
[params.MS_Server]
BroadcastsToLanman2Clients = No
Optimization = Balance
If the SpecificTo entry is not present in an adapter-specific section, then the entries in that section are global to the network protocol that is configured during the Windows setup process.
If you specify an entry that is in both the [Protocol] section and an adapter-specific protocol section, Setup ignores the entries specified in the adapter-specific section.