Share via


Checklist: Installing and Configuring an RRAS Router

Applies To: Windows 7, Windows Server 2008 R2

Task Reference

Review key concepts. Decide which protocols and routing features of RRAS you want to use.

Routing

IPv4 Routing

IPv6 Routing

Routing Information Protocol for IPv4

Network Address Translation

Demand-Dial Routing

Configure TCP/IP on the network adapters of the RRAS server.

Configure TCP/IP on the RRAS Server

Install RRAS.

Install RRAS

Enable RRAS and configure it as a router.

Enable RRAS as a LAN and WAN Router

(Optional) Design and deploy static IP routing.

Create a Static Route

(Optional) Design and deploy Routing Information Protocol (RIP) for IP.

Enable and Configure RIP

(Optional) Add and configure the DHCP Relay Agent.

Configure the IPv4 DHCP Relay Agent

Configure the IPv6 DHCP Relay Agent

(Optional) Configure IP multicast support.

IPv4 Multicasting

(Optional) Design and deploy network address translation (NAT).

Enable and Configure NAT

(Optional) Configure IP packet filters.

Configure Static Packet Filters

(Optional) Design and deploy demand-dial routing.

Create a Demand-Dial Interface

Additional references