New-ActiveSyncVirtualDirectory

This cmdlet is available only in on-premises Exchange.

Use the New-ActiveSyncVirtualDirectory cmdlet to create Exchange ActiveSync virtual directories that are used in Internet Information Services (IIS) on Microsoft Exchange servers.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

New-ActiveSyncVirtualDirectory
   [-ApplicationRoot <String>]
   [-AppPoolId <String>]
   [-Confirm]
   [-DomainController <Fqdn>]
   [-ExtendedProtectionFlags <MultiValuedProperty>]
   [-ExtendedProtectionSPNList <MultiValuedProperty>]
   [-ExtendedProtectionTokenChecking <ExtendedProtectionTokenCheckingMode>]
   [-ExternalAuthenticationMethods <MultiValuedProperty>]
   [-ExternalUrl <Uri>]
   [-InstallProxySubDirectory <Boolean>]
   [-InternalAuthenticationMethods <MultiValuedProperty>]
   [-InternalUrl <Uri>]
   [-Path <String>]
   [-Role <VirtualDirectoryRole>]
   [-Server <ServerIdParameter>]
   [-WebSiteName <String>]
   [-WhatIf]
   [<CommonParameters>]

Description

The New-ActiveSyncVirtualDirectory cmdlet creates an Exchange ActiveSync virtual directory on the specified server under the specified website. The Exchange ActiveSync virtual directory created is named Microsoft-Server-ActiveSync. Only one Exchange ActiveSync virtual directory can exist in each Exchange ActiveSync website.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

New-ActiveSyncVirtualDirectory -WebSiteName "Default Web Site" -ExternalUrl https://www.contoso.com/Microsoft-Server-ActiveSync

This example creates an Exchange ActiveSync virtual directory and specifies the external URL used to connect to the virtual directory.

Example 2

New-ActiveSyncVirtualDirectory -WebSiteName "Default Web Site" -ExternalUrl https://www.contoso.com/mail -InternalUrl https://contoso/mail

This example creates an Exchange ActiveSync virtual directory and specifies the external and internal URLs used to connect to the virtual directory.

Example 3

New-ActiveSyncVirtualDirectory -WebSiteName "Default Web Site" -ExternalUrl "https://www.fourthcoffee.com/Microsoft-Server-ActiveSync"

This example creates an Exchange ActiveSync virtual directory for the company Fourth Coffee.

Parameters

-ApplicationRoot

The ApplicationRoot parameter specifies the metabase path of the virtual directory. By default, this path is the same as the website in which the virtual directory is created.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AppPoolId

The AppPoolId parameter specifies the IIS application pool in which the virtual directory runs. We recommend that you leave this parameter at its default setting.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExtendedProtectionFlags

The ExtendedProtectionFlags parameter specifies custom settings for Extended Protection for Authentication on the virtual directory. Valid values are:

  • None: This is the default setting.
  • AllowDotlessSPN: Required if you want to use Service Principal Name (SPN) values that don't contain FQDNs (for example, HTTP/ContosoMail instead of HTTP/mail.contoso.com). You specify SPNs with the ExtendedProtectionSPNList parameter. This setting makes Extended Protection for Authentication less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.
  • NoServiceNameCheck: The SPN list isn't checked to validate a channel binding token. This setting makes Extended Protection for Authentication less secure. We generally don't recommend this setting.
  • Proxy: A proxy server is responsible for terminating the SSL channel. To use this setting, you need to register an SPN by using the ExtendedProtectionSPNList parameter.
  • ProxyCoHosting: HTTP and HTTPS traffic may be accessing the virtual directory, and a proxy server is located between at least some of the clients and the Client Access services on the Exchange server.
Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExtendedProtectionSPNList

The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the virtual directory. Valid values are:

  • $null: This is the default value.
  • Single SPN or comma delimited list of valid SPNs: The SPN value format is Protocol\FQDN. For example, HTTP/mail.contoso.com. To add an SPN that's not an FQDN (for example, HTTP/ContosoMail), you also need to use the AllowDotlessSPN value for the ExtendedProtectionFlags parameter.
Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExtendedProtectionTokenChecking

The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the virtual directory. Extended Protection for Authentication isn't enabled by default. Valid values are:

  • None: Extended Protection for Authentication isn't be used on the virtual directory. This is the default value.
  • Allow: Extended Protection for Authentication is used for connections between clients and the virtual directory if both the client and server support it. Connections that don't support Extended Protection for Authentication will work, but may not be as secure as connections that use Extended Protection for Authentication.
  • Require: Extended Protection for Authentication is used for all connections between clients and the virtual directory. If either the client or server doesn't support it, the connection will fail. If you use this value, you also need to set an SPN value for the ExtendedProtectionSPNList parameter.

Note: If you use the value Allow or Require, and you have a proxy server between the client and the Client Access services on the Mailbox server that's configured to terminate the client-to-proxy SSL channel, you also need to configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.

Type:ExtendedProtectionTokenCheckingMode
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExternalAuthenticationMethods

The ExternalAuthenticationMethods parameter restricts the authentication methods that can be used to connect to the virtual directory from outside the firewall. Valid values are:

  • Adfs
  • Basic
  • Certificate
  • Digest
  • Fba
  • Kerberos
  • LiveIdBasic
  • LiveIdFba
  • LiveIdNegotiate
  • NegoEx
  • Negotiate
  • Ntlm
  • OAuth
  • WindowsIntegrated
  • WSSecurity

You can specify multiple values separated by commas.

Although you can specify any of these values, whether or not the authentication method actually works for external connections depends on other factors. For example:

  • Is the authentication method available on the virtual directory?
  • Is the authentication method available, but disabled on the virtual directory?

The default value is blank ($null), which means all available authentication methods are accepted.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExternalUrl

The ExternalURL parameter specifies the URL that's used to connect to the virtual directory from outside the firewall.

Type:Uri
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InstallProxySubDirectory

The InstallProxySubDirectory parameter was used to create an subdirectory that was required for proxying ActiveSync connections with Exchange 2007.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InternalAuthenticationMethods

The InternalAuthenticationMethods parameter restricts the authentication methods that can be used to connect to the virtual directory from inside the firewall. Valid values are:

  • Adfs
  • Basic
  • Certificate
  • Digest
  • Fba
  • Kerberos
  • LiveIdBasic
  • LiveIdFba
  • LiveIdNegotiate
  • NegoEx
  • Negotiate
  • Ntlm
  • OAuth
  • WindowsIntegrated
  • WSSecurity

You can specify multiple values separated by commas.

Although you can specify any of these values, whether or not the authentication method actually works for internal connections depends on other factors. For example:

  • Is the authentication method available on the virtual directory?
  • Is the authentication method available, but disabled on the virtual directory?

The default value is blank ($null), which means all available authentication methods are accepted.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InternalUrl

The InternalURL parameter specifies the URL that's used to connect to the virtual directory from inside the firewall.

Type:Uri
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Path

The Path parameter specifies the file system path of the virtual directory. We recommend using this parameter only when you need to use a custom location for the virtual directory files. The default value is blank ($null), which indicates the default location is used.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Role

The Role parameter species the configuration for the virtual directory. Valid values are:

  • ClientAccess: Configure the virtual directory for the Client Access (frontend) services on the Mailbox server.
  • Mailbox: Configure the virtual directory for the backend services on the Mailbox server.

Client connections are proxied from the Client Access services to the backend services on local or remote Mailbox servers. Clients don't connect directly to the backend services.

Type:VirtualDirectoryRole
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Server

The Server parameter specifies the Exchange server that hosts the virtual directory. You can use any value that uniquely identifies the server. For example:

  • Name
  • FQDN
  • Distinguished name (DN)
  • ExchangeLegacyDN
Type:ServerIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WebSiteName

The WebSiteName parameter specifies the name of the IIS website under which the virtual directory is created. You don't need to use this parameter to create the virtual directory under the default website.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.