Stop-PcsvDevice

Stop-PcsvDevice

Shuts down a remote hardware device.

Syntax

Parameter Set: InputObject (cdxml)
Stop-PcsvDevice -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByComputerName
Stop-PcsvDevice [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> [[-Port] <UInt16> ] [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-Confirm] [-WhatIf] [ <CommonParameters>]

Detaillierte Beschreibung

The Stop-PcsvDevice cmdlet shuts down a remote hardware device by using Web Services for Management (WS-Management) or Intelligent Platform Management Interface (IPMI). The cmdlet puts the device in the Disabled state, which corresponds to a hard shutdown of the hardware device. Specify the remote hardware device by the management name or IP address, provide credentials necessary to shut down the remote hardware device, and specify which management protocol to use. The credentials must have administrator permissions on the remote hardware device.

Parameter

-AsJob

-Authentication<Authentication>

Specifies an authentication method to use for devices managed by using WS-Management. Do not specify this parameter for devices managed by using IPMI. Die folgenden Werte für diesen Parameter sind zulässig:

-- Basic
-- Digest
-- Default

If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.

-CimSession<CimSession[]>

Führt das Cmdlet in einer Remotesitzung oder auf einem Remotecomputer aus. Geben Sie einen Computernamen oder ein Sitzungsobjekt ein, z. B. die Ausgabe eines Cmdlets New-CimSession oder Get-CimSession. Der Standardwert ist die aktuelle Sitzung auf dem lokalen Computer.

-Credential<PSCredential>

Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential. This parameter specifies the credential for the remote hardware device.

-InputObject<CimInstance[]>

Specifies an array of devices, as MSFT_PCSVDevice objects, to manage. To obtain MSFT_PCSVDevice objects, use the Get-PcsvDevice cmdlet.

-ManagementProtocol<ManagementProtocol>

Specifies a management protocol used to communicate with a device. Die folgenden Werte für diesen Parameter sind zulässig:

-- WSMAN
-- IPMI

Refer to your hardware documentation for supported management protocols.

Specify WSMAN for devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH), or Physical Computer System View profiles.

-PassThru

Gibt ein Objekt zurück, das das Element darstellt, mit dem Sie arbeiten. Standardmäßig wird von diesem Cmdlet keine Ausgabe generiert.

-Port<UInt16>

Specifies a port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default values:

-- IPMI and WSMAN over HTTP. Port 623.
-- WSMAN over HTTPS. Port 664.

-SkipCACheck

Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.

-SkipCNCheck

Indicates that the certificate CN of the server does not need to match the host name of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Specify this parameter only for managing devices by using WS-Management over HTTPS. Be sure to specify this parameter only for trusted computers.

-SkipRevocationCheck

Indicates that the cmdlet skips the revocation check of server certificates. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Be sure to specify this parameter only for trusted computers.

-TargetAddress<String>

Specifies the name or IP address of the management port on the remote hardware device. For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address. For other devices, like network switches, this is the IP address of their management port. For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.

-ThrottleLimit<Int32>

Gibt die maximale Anzahl von gleichzeitigen Vorgängen an, die zum Ausführen dieses Cmdlets eingerichtet werden können. Wenn dieser Parameter ausgelassen oder der Wert 0 eingegeben wird, berechnet Windows PowerShell® einen optimalen Drosselungsgrenzwert für das Cmdlet basierend auf der Anzahl der CIM-Cmdlets, die auf dem Computer ausgeführt werden. Die Drosselungsgrenze gilt nur für das aktuelle Cmdlet und nicht für die Sitzung oder den Computer.

-TimeoutSec<UInt32>

Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.

-UseSSL

Indicates that the server connects to the target computer by using SSL. WSMAN encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.

-Confirm

Sie werden vor dem Ausführen des Cmdlets zur Bestätigung aufgefordert.

-WhatIf

Zeigt, was geschieht, wenn das Cmdlet ausgeführt wird. Das Cmdlet wird nicht ausgeführt.

<CommonParameters>

Dieses Cmdlet unterstützt die allgemeinen Parameter: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable. Weitere Informationen finden Sie unter about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Eingaben

Der Eingabetyp ist der Typ der Objekte, die über die Pipeline an das Cmdlet übergeben werden können.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice

  A MSFT_PCSVDevice object that is the target for the operation. To obtain a MSFT_PCSVDevice object, use the Get-PcsvDevice cmdlet.

Ausgaben

Der Ausgabetyp ist der Typ der Objekte, die vom Cmdlet ausgegeben werden.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice

  The cmdlet only returns an MSFT_PCSVDevice object if you specify the PassThru parameter.

Beispiele

Example 1: Shut down a computer

This example shuts down a computer.

The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential.

The second command shuts down the computer that has the management IP address 10.1.12.43 by using the IPMI management protocol. The command specifies the credential object, stored in the $Credential variable, needed to connect to the computer. By default, the cmdlet prompts you before it stops the remote hardware device.

PS C:\> $Credential = Get-Credential
PS C:\>Stop-PcsvDevice -TargetAddress "10.1.12.43" -Credential $Credential -ManagementProtocol IPMI

Verwandte Themen

Get-PcsvDevice

Restart-PcsvDevice

Set-PcsvDeviceBootConfiguration

Start-PcsvDevice