Set-WdsInstallImage
Set-WdsInstallImage
Modifies the properties of an install image.
Syntax
Parameter Set: AutoStart
Set-WdsInstallImage -ImageName <String> -Multicast [-AsJob] [-CimSession <CimSession[]> ] [-ClientCount <UInt32> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-StartTime <DateTime> ] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: ManualStart
Set-WdsInstallImage -ImageName <String> -ManualStart -Multicast [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: SingleImage
Set-WdsInstallImage -ImageName <String> [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: StartTransmission
Set-WdsInstallImage -ImageName <String> -StartScheduledCast [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: StopTransmission
Set-WdsInstallImage -ImageName <String> -StopMulticastTransmission [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-Force] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Detaillierte Beschreibung
The Set-WdsInstallImage cmdlet modifies the properties of an install image in the Windows Deployment Services image store. Use this cmdlet to do any of the following:
-- Change the name of an install image.
-- Change the description of an install image.
-- Set the display order of an install image in the image menu.
-- Specify an answer file for unattended setup of an install image.
-- Set permissions for users or groups to access the image.
When you work with multicast transmissions that use an install image as content, you can:
-- Create and name an AutoCast transmission.
-- Create and name a ScheduledCast transmission which begins when a preset number of clients are ready to start, at a specific time, or both.
-- Create a manually started ScheduledCast transmission.
-- Start a ScheduledCast transmission.
-- Stop a multicast transmission in progress, and then either disconnect clients immediately, or allow them to finish, but not allow any new clients to join.
An AutoCast transmission is a multicast transmission. When a client requests an install image, the multicast transmission begins. Clients that request the same image are joined to the multicast transmission.
A ScheduledCast transmission is a multicast transmission. When a specified number of clients request an image, or a specified time of day is reached, the multicast transmission begins. If you do not specify either of these conditions, you must manually start the transmission.
Specify the install image by using the image name and image group name. If the image name and image group name do not uniquely identify the install image, specify the file name.
Parameter
-AsJob
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-CimSession<CimSession[]>
Führt das Cmdlet in einer Remotesitzung oder auf einem Remotecomputer aus. Geben Sie einen Computernamen oder ein Sitzungsobjekt ein, z. B. die Ausgabe eines Cmdlets New-CimSession oder Get-CimSession. Der Standardwert ist die aktuelle Sitzung auf dem lokalen Computer.
Aliasse |
Session |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-ClientCount<UInt32>
Specifies the number of clients that must connect to a transmission. If you also specify the MulticastTransmission parameter, the client count specifies the number of clients that must connect to the ScheduledCast transmission in order for it to begin. Use the StartScheduledCast parameter to begin a transmission before reaching the client count. If you specify the ClientCount parameter and the StartTime parameter, the transmission begins when either a sufficient number of clients have connected or at the time specified by the StartTime parameter.
You may not specify this parameter together with the ManualStart parameter.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-DisplayOrder<UInt32>
Specifies the order in which images appear in the boot menu on Pre-Boot Execution Environment (PXE) clients. The menu lists the boot images in ascending order, smallest number to largest number.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-FileName<String>
Specifies a file name. This is the file name of the install image. Use this parameter to specify the file name for the install image if the install image name does not uniquely identify the image.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-Force
Indicates that the cmdlet disconnects any clients currently connected to the multicast transmission. If you do not specify this parameter for an AutoCast transmission, existing clients finish receiving the content, but no new clients join.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-ImageGroup<String>
Specifies the name of an image group. This image group contains the image to modify.. If you do not specify an image group, and only one image group exists on the server, the cmdlet uses that image group by default. If more than one image group exists on the server, you must specify the image group.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ImageName<String>
Specifies the name of an image. This is the name of the image to modify.
Aliasse |
Keiner |
Erforderlich? |
true |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ManualStart
Indicates that the transmission uses a manual start. If you also specify the MulticastTransmission parameter, the cmdlet creates a ScheduledCast transmission that does not begin until a StartScheduledCast command is given.
Aliasse |
Keiner |
Erforderlich? |
true |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Multicast
Indicates that the cmdlet enables an AutoCast transmission on the image. If you do not specify a name by using the TransmissionName parameter, the multicast transmission uses the image name
Aliasse |
Keiner |
Erforderlich? |
true |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-NewDescription<String>
Specifies a new description for the install image to create in the set operation.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-NewImageName<String>
Specifies a new name for the image file to create in the set operation.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-OverwriteUnattend
Indicates that the cmdlet can overwrite an existing answer file. If you specify the UnattendFile parameter, the cmdlet overwrites an existing answer file associated with the image.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-StartScheduledCast
Indicates that the cmdlet enables and begins a ScheduledCast transmission on the image. If there are no clients connected to the transmission, the transmission fails to start.
Aliasse |
Keiner |
Erforderlich? |
true |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-StartTime<DateTime>
Specifies a day and time, in MM/DD/YYYY.hh:mm:ss format, that denotes the start time. If you specify the MulticastTransmission parameter, this parameter denotes the time the ScheduledCast transmission begins. The StartScheduledCast command can start a transmission before reaching the client count. If you specify both the StartTime parameter and the ClientCount parameter, the transmission begins when either a sufficient number of clients connect, or the time specified in this parameter is reached. Do not specify this parameter together with the ManualStart parameter.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-StopMulticastTransmission
Indicates that Windows Deployment Services stop the multicast transmission of the image. If you specify the Force parameter, the cmdlet disconnects any clients connected to the multicast transmission. If you do not specify the Force parameter, and the transmission is autocast, current clients finish receiving the content, but no additional clients can join the transmission.
Aliasse |
Keiner |
Erforderlich? |
true |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-ThrottleLimit<Int32>
Gibt die maximale Anzahl von gleichzeitigen Vorgängen an, die zum Ausführen dieses Cmdlets eingerichtet werden können. Wenn dieser Parameter ausgelassen oder der Wert 0 eingegeben wird, berechnet Windows PowerShell® einen optimalen Drosselungsgrenzwert für das Cmdlet basierend auf der Anzahl der CIM-Cmdlets, die auf dem Computer ausgeführt werden. Die Drosselungsgrenze gilt nur für das aktuelle Cmdlet und nicht für die Sitzung oder den Computer.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-TransmissionName<String>
Specifies a name for the multicast transmission.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-UnattendFile<String>
Specifies the full path for the answer file associated with the image.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-UserFilter<String>
Specifies the access controls on the image, in Security Descriptor Definition Language (SDDL) format. To restrict access to the file resources, and access to all images within an image group, set access controls on the image group itself.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
<CommonParameters>
Dieses Cmdlet unterstützt die allgemeinen Parameter: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable. Weitere Informationen finden Sie unter about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Eingaben
Der Eingabetyp ist der Typ der Objekte, die über die Pipeline an das Cmdlet übergeben werden können.
Ausgaben
Der Ausgabetyp ist der Typ der Objekte, die vom Cmdlet ausgegeben werden.
- Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsInstallImage
Beispiele
Example 1: Modify an install image
This command modifies an install image for automatic installation.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -DisplayOrder 0 -NewImageName "Fabrikam Latest with LOB v2.0 apps" -UnattendFile "D:\images\unattend\FabrikamwLOB.xml" -OverwriteUnattend -UserFilter "O:BAG:DUD:(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)(A;OICI;0x1200a9;;;AU)(A;OICI;FA;;;S-1-5-80-1688844526-3235337491-1375791646-891369040-3692469510)"
Example 2: Modify an install image for multicast transmission
This command modifies an install image for multicast transmission.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -TransmissionName "Fabrikam Latest AutoCast"
Example 3: Modify start time and client count conditions for an install image
This command modifies an install image by using the ClientCount and StartTime parameters.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ClientCount 50 -StartTime 2014/12/01:11:00 -TransmissionName "Fabrikam Latest ScheduledCast with automatic start"
Example 4: Modify an install image for manual start
This command modifies an install image by using the ManualStart parameter.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ManualStart -TransmissionName "Fabrikam Latest ScheduledCast with manual start"
Example 5: Modify an install image to start
This command modifies an install image to begin a scheduled transmission.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StartScheduledCast
Example 6: Modify an install image to stop a transmission
This command stops a multicast transmission for an install image.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StopMulticastTransmission