MSExchange ADAccess 2060
Letztes Änderungsdatum des Themas: 2011-03-24
Dieser Artikel bietet eine Erläuterung und mögliche Lösungen für ein bestimmtes Exchange-Ereignis. Wenn Sie hier das Gesuchte nicht finden können, durchsuchen Sie die Exchange 2010-Hilfe.
Details
Product Name |
Exchange |
Product Version |
14.0 |
Event ID |
2060 |
Category |
Topology |
Symbolic Name |
DSC_EVENT_NO_LOCAL_GC_FOUND |
Message Text |
Process %1 (PID=%2). No Global Catalog server was found in the local site %3. Exchange Active Directory Provider will try to find Global Catalog servers in other sites. |
Explanation
This event indicates that topology discovery determined that there are no suitable global catalog servers in the local site. DSAccess will use out-of-site global catalog servers. However, they may respond slower, which can cause message queuing and network saturation.
This event may be logged when the following conditions are true:
- No global catalog servers exist in the local site.
- All in-site global catalog servers are down or not suitable.
- Network problems prevent the Microsoft Exchange server from contacting the global catalog servers.
- Permissions problems exist.
- Configuration errors exist.
User Action
To resolve this event, do one or more of the following:
- Make sure that the local site has sufficient global catalog servers for Exchange operation.
- If a global catalog server is expected to be present, confirm it is running and reachable over the network from the Exchange server.
- Use the
nltest /dsgetdc: <domain> /site:<local site name>
command to verify that a global catalog server can be located in the local site. Look for the global catalog server flag in the nltest output. The NLTest tool is installed with the Windows support tools. - Suchen Sie im Anwendungsprotokoll nach verwandten Ereignissen. Die Details in weiteren MSExchange ADAccess-Ereignissen und anderen Ereignissen können dabei helfen, die Hauptursache für diese Warnung zu ermitteln. Erhöhen Sie den Diagnoseprotokolliergrad für die Kategorie "MSExchange ADAccess\Topologie" auf Niedrigste oder höher. Weitere Informationen zur Erhöhung des Protokolliergrads finden Sie unter Verwalten der Diagnoseprotokolliergrade.
- If MSExchange ADAccess Event ID 2080 is logged, no suitable global catalogs were found when initial topology discovery completed. Review that event to determine which domain controllers have been contacted and if they are unsuitable for any reasons. Correct any problems as indicated by the event description. For more information, see Microsoft Knowledge Base article 316300, Event ID 2080 from MSExchangeDSAccess.
- If MSExchange ADAccess Event ID 2070 is logged, a global catalog may be down or is unreachable. Review the event for details about why each domain controller has become unsuitable. ADAccess found no suitable global catalogs when initial topology discovery completed.
- Verwenden Sie das Befehlszeilentool
Ping
oderPathPing
zum Testen der grundlegenden Konnektivität. Verwenden SiePing
, um Netzwerkhardwareprobleme und inkompatible Konfigurationen zu isolieren. Verwenden SiePathPing
, um Paketverluste bei Routen mit mehreren Hops zu ermitteln. Weitere Informationen finden Sie im Microsoft Knowledge Base-Artikel 325487 Behandlung von Problemen mit der Netzwerkverbindung. - Führen Sie das Befehlszeilentool
Dcdiag
aus, um den Domänencontrollerzustand zu testen. Führen Sie hierfürdcdiag /s:[Domänencontrollername]
an einer Eingabeaufforderung des Exchange-Servers aus. Verwenden Sie die Ausgabe vonDcdiag
, um die Hauptursache der gemeldeten Fehler oder Warnungen zu ermitteln. Weitere Informationen finden Sie unter Dcdiag im Überblick (möglicherweise in englischer Sprache) im Windows Server TechCenter.
For more information about the Get-EventLogLevel and Set-EventLogLevel diagnostic logging cmdlets, see the following topics:
For More Information
Wenn dies nicht bereits der Fall ist, sollten Sie die Exchange-Tools ausführen, die für die Analyse und Problembehandlung der Exchange-Umgebung erstellt wurden. Mit diesen Tools kann sichergestellt werden, dass Ihre Konfiguration die bewährten Methoden von Microsoft einhält. Sie tragen zudem zur Identifikation und zur Lösung von Leistungsproblemen bei, und können die Nachrichtenübermittlung verbessern. Sie können diese Tools über den Knoten Toolbox in der Exchange-Verwaltungskonsole ausführen. Weitere Informationen zu diesen Tools finden Sie unter Verwalten von Tools in der Toolbox.