Get-DlpDetailReport
This cmdlet is available only in the cloud-based service.
Note: This cmdlet will be retired. Use the Export-ActivityExplorerData cmdlet to view DLP information. Data from Export-ActivityExplorerData is the same as the retired Get-DlpIncidentDetailReport cmdlet.
Use the Get-DlpDetailReport cmdlet to list details about data loss prevention (DLP) rule matches for Exchange Online, SharePoint Online, and OneDrive for Business in your cloud-based organization for the last 30 days.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Get-DlpDetailReport
[-Action <MultiValuedProperty>]
[-Actor <MultiValuedProperty>]
[-DlpCompliancePolicy <MultiValuedProperty>]
[-DlpComplianceRule <MultiValuedProperty>]
[-EndDate <DateTime>]
[-EventType <MultiValuedProperty>]
[-Page <Int32>]
[-PageSize <Int32>]
[-Source <MultiValuedProperty>]
[-StartDate <DateTime>]
[<CommonParameters>] Description
The Get-DlpDetailReport cmdlet returns detailed information about specific DLP rule matches for the last 7 days. Although the cmdlet accepts date ranges older than 7 days, only information about the last 7 days are returned. The properties returned include:
- Date
- Title
- Location
- Severity
- Size
- Source
- Actor
- DLPPolicy
- UserAction
- Justification
- SensitiveInformationType
- SensitiveInformationCount
- SensitiveInformationConfidence
- EventType
- Action
- ObjectId
- Recipients
- AttachmentNames
To see DLP detection data that's aggregated per day, use the Get-DlpDetectionsReport cmdlet.
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-DlpDetailReport -StartDate 11/01/2018 -EndDate 11/07/2018The following example lists the details of all the DLP policy activities defined in your organization between the dates specified.
Parameters
-Action
The Action parameter filters the report by the action taken by DLP policies. Valid values are:
- BlockAccess
- GenerateIncidentReport
- NotifyUser
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-Actor
The Actor parameter filters the report by the user who last modified the item. You can enter multiple users separated by commas.
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-DlpCompliancePolicy
The DlpCompliancePolicy parameter filters the report by the name of the DLP compliance policy. You can specify multiple policies separated by commas.
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-DlpComplianceRule
The DlpComplianceRule parameter filters the report by the name of the DLP compliance rule. You can specify multiple rules separated by commas.
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-EndDate
The EndDate parameter specifies the end date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-EventType
The EventType parameter filters the report by the event type. Valid values are:
- DLPActionHits
- DLPActionUndo
- DLPMessages
- DLPPolicyFalsePositive
- DLPPolicyHits
- DLPPolicyOverride
- DLPRuleHits
To view the potential list of valid values for this parameter, run the command: Get-MailFilterListReport -SelectionTarget EventTypes. The event type you specify must correspond to the report. For example, you can only specify DLP event types for DLP reports.
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-Page
The Page parameter specifies the page number of the results you want to view. Valid input for this parameter is an integer between 1 and 1000. The default value is 1.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-PageSize
The PageSize parameter specifies the maximum number of entries per page. Valid input for this parameter is an integer between 1 and 5000. The default value is 1000.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-Source
The Source parameter filters the report by workload. Valid values are:
- EXCH: Exchange Online
- ODB: OneDrive for Business
- SPO: SharePoint Online
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
-StartDate
The StartDate parameter specifies the start date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Security & Compliance |
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for