Share via


System Requirements: System Center 2012 - Operations Manager

 

Updated: May 13, 2016

Applies To: System Center 2012 - Operations Manager

This document provides information about the operating systems, hardware configurations, software requirements, installation combinations, and security configurations for System Center 2012 – Operations Manager. This document focuses on the system requirements and only mentions unsupported configurations when necessary. If operating systems, hardware configurations, software requirements, installation combinations, and security configurations are not presented here, they have not been tested and are not supported.

The Prerequisites checker is no longer a separate option in Setup. However, you can begin the installation process to check the hardware and software prerequisites, and then cancel installation after the required prerequisites have been determined.

We recommend that you also review the key concepts of Operations Manager. Areas to review include the following documents:

Note

System Center 2012 – Operations Manager does not support .NET Framework 4.5 or .NET Framework 4.5.1.

This document contains the following sections:

  • Operations Manager Virtualization Support

  • Minimum Screen Resolution Requirements

  • Minimum Hardware Requirements

  • Minimum Software Requirements

  • Requirements by Feature

    • Management Server

    • Operations Console

    • Web Console

    • Operational Database

    • Operations Manager Agent – Windows-Based Computers

    • Operations Manager Agent – UNIX- or Linux Computers

    • Operations Manager Reporting

    • Operations Manager Data Warehouse

    • Operations Manager Gateway Server

  • Supported Firewall Scenarios

  • Minimum Network Connectivity Speeds

  • Supported Cluster Configurations

  • Monitored Item Capacity

  • Operations Manager Feature Firewall Exceptions

  • Support for Languages in Addition to English

  • Supported Network Monitoring Scenarios

  • Application Performance Monitoring Requirements

Operations Manager Virtualization Support

Microsoft supports running all System Center 2012 – Operations Manager server features in any physical or virtual environment that meets the minimum requirements that are stated in this document. However, for performance reasons, we recommend that you store the operational database and data warehouse database on a directly attached physical hard drive, and not on a virtual disk. Specifically, virtual computers that are running any Operations Manager server feature must not use any functionality that does not immediately commit all activity on the virtual computer to the virtual hard drive. This includes making use of point-in-time snapshots and writing changes to a temporary virtual hard drive. This is true for every virtualization technology that is used with Operations Manager.

Minimum Screen Resolution Requirements

Operations Manager is optimized for screen resolutions of 1280 x 1024 or larger. The minimum supported screen resolution is 1024 x 768.

Minimum Hardware Requirements

Use the Operations Manager Sizing Helper to determine hardware requirements for each System Center 2012 – Operations Manager server feature. If you want to install more than one feature on the same computer, use the higher of the recommended hardware requirements for any of the combined features.

Supported Processors, Memory, and Disk Space

Note

Operations Manager does not support installing the 32-bit agent on a 64-bit operating system. Operations Manager provides native support for x86-based computers for agents and consoles, and x64-based computers for all server features and support for agents on computers with 64-bit Itanium processors.

Minimum Software Requirements

Operations Manager server features require a supported operating system. For a list of the supported operating systems for each server feature, see the 56d0b6b3-44ae-4663-bc43-29fcedb4058f#BKMK_ReqByFeature section in this document.

Important

During the initial installation of the operational database, only use Windows Authentication on the SQL server that hosts the Operations Manager operational database. Do not use Mixed Mode (Windows Authentication and SQL Server Authentication) because using SQL Server Authentication mode during the initial installation of the operational database can cause issues. Although enabling Mixed Mode security is possible on the SQL Server hosting the Operations Manager operational database, it is not supported as all contact with the database is accomplished using Windows accounts only.

We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:

  • SQL Server 2008 is available in both Standard and Enterprise editions. Operations Manager will function with both editions.

  • Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.

  • Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.

  • SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation settings are supported.

  • The SQL Server Agent service must be started, and the startup type must be set to automatic.

  • Side-by-side installation of System Center Operations Manager 2007 R2 Reporting and System Center 2012 – Operations Manager Reporting on the same server is not supported.

  • The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start. For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change

  • If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see tempdb Database.

If you want to install more than one Operations Manager feature on the same computer, you must install the prerequisite software for all of the combined features.

Requirements by Feature

Management Server

  • Disk space: %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.

  • Server Operating System: must be Windows Server 2008 R2 SP1.

  • Processor Architecture: must be x64.

  • Windows PowerShell version: Windows PowerShell version 2.0.

  • Windows Remote Management: Windows Remote Management must be enabled for the management server.

  • Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the management server.

  • Both .NET Framework 3.5 Service Pack 1 (SP1) and .NET Framework 4 are required. For more information, see the following documents:

Operations Console

  • Microsoft Report Viewer 2010 Redistributable Package

  • Microsoft .NET Framework 3.5 SP1 hotfix

  • Disk space: %SYSTEMDRIVE% requires at least 512 MB free hard disk space.

  • File system: %SYSTEMDRIVE% must be formatted with the NTFS file system.

  • Server Operating System: must be Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2, or Windows Server 2008 R2 SP1.

  • Processor Architecture: must be x64 for servers and x64 or x86 for a client computer.

  • Windows Installer version: at least Windows Installer 3.1.

  • Windows PowerShell version: Windows PowerShell version 2.0. Windows PowerShell version 3.0 is required to use Windows PowerShell cmdlets for administration of UNIX and Linux computers.

  • Both .NET Framework 3.5 SP1 and .NET Framework 4 are required. For more information, see the following documents:

Web Console

  • Operating System: Windows Server 2008 R2 SP1.

  • Processor Architecture: must be x64.

  • Web browsers: Internet Explorer 7, Internet Explorer 8, Internet Explorer 9

  • Internet Information Services (IIS) 7.5 and later versions, with the IIS Management Console and the following role services installed:

    • Static Content

    • Default Document

    • Directory Browsing

    • HTTP Errors

    • HTTP Logging

    • Request Monitor

    • Request Filtering

    • Static Content Compression

    • Web Server (IIS) Support

    • IIS 6 Metabase Compatibility

    • ASP.NET

    • Windows Authentication

  • Selected website for web console: requires a configured http or https binding.

    Warning

    Installing the web console on a computer that has SharePoint installed is not supported.

  • Both .NET Framework 3.5 SP1 and .NET Framework 4 are required for Setup to run. For more information, see the following documents:

Note

Installation of the web console requires that ISAPI and CGI Restrictions in IIS are enabled for ASP.NET 4. To enable this, select the web server in IIS Manager, and then double-click ISAPI and CGI Restrictions. Select ASP.NET v4.0.30319, and then click Allow.

Important

You must install IIS before installing .NET Framework 4. If you installed IIS after installing .NET Framework 4, you must register ASP.NET 4.0 with IIS. Open a Command prompt window by using the Run As Administrator option, and then run the following command:

%WINDIR%\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -r

Operational Database

  • Disk space: The operational database must have at least 1024 MB free disk space. This is enforced at the time of database creation, and it will likely grow significantly. For information about SQL Server Planning, see Installing SQL Server 2008 or Installing SQL Server 2008 R2.

  • File system: %SYSTEMDRIVE% must be formatted with the NTFS file system.

  • Operating System: Windows Server 2008 SP2 or Windows Server 2008 R2 SP1.

  • Processor Architecture: x64.

  • Windows Installer version: at least Windows Installer 3.1.

  • Microsoft SQL Server: SQL Server 2008 SP1, SQL Server 2008 SP2, SQL Server 2008 SP3, SQL Server 2008 R2, SQL Server 2008 R2 SP1, SQL Server 2008 R2 SP2, SQL Server 2012, or SQL Server 2012 SP1.

  • SQL Server Full Text Search is required.

  • Both .NET Framework 3.5 SP1 and .NET Framework 4 are required. For more information, see the following documents:

Operations Manager Agent – Windows-Based Computers

  • File system: %SYSTEMDRIVE% must be formatted with the NTFS file system.

  • Operating Systems: Windows Server 2003 SP2, Windows Server 2008 SP2, Windows Server 2008 R2, Windows Server 2008 R2 SP1, Windows Server 2012, Windows XP Professional x64 Edition SP2, Windows XP Professional SP3, or Windows Vista SP2, or Windows 7, POSReady, Windows XP Embedded Standard, or Windows XP Embedded Enterprise, or Windows XP Embedded POSReady, Windows 7 Professional for Embedded Systems, or Windows 7 Ultimate for Embedded Systems.

  • Processor Architectures: x64, x86, or IA64.

  • Windows Installer version: at least Windows Installer 3.1.

  • Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the Operations Manager agent.

  • Windows PowerShell version: Windows PowerShell version 2.0.

    Note

    Windows PowerShell is required for agents that will be monitored by a management pack that uses PowerShell scripts.

Operations Manager Agent – UNIX- or Linux Computers

Supported operating systems:

  • HP-UX 11i v2 and v3 (PA-RISC and IA64)

  • Oracle Solaris 9 (SPARC), Solaris 10 (SPARC and x86), and Solaris 11 (SPARC and x86)

  • Red Hat Enterprise Linux 4, 5, and 6 (x86/x64)

  • Novell SUSE Linux Enterprise Server 9 (x86), 10 SP1 (x86/x64), and 11 (x86/x64)

  • IBM AIX 5.3, AIX 6.1 (POWER), and AIX 7.1 (POWER)

Operations Manager Reporting

  • Disk space: The %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.

  • Operating System: Windows Server 2008 R2 SP1.

  • Processor Architecture: x64.

  • Microsoft SQL Server: SQL Server 2008 SP1, SQL Server 2008 SP2, SQL Server 2008 SP3, SQL Server 2008 R2, SQL Server 2008 R2 SP1, or SQL Server 2008 R2 SP2.

  • The Remote Registry service must be enabled and started.

  • Microsoft SQL Server Reporting Services: Microsoft SQL Server: SQL Server 2008 SP1, SQL Server 2008 SP2, SQL Server 2008 SP3, SQL Server 2008 R2, SQL Server 2008 R2 SP1, or SQL Server 2008 R2 SP2.

  • System Center 2012 – Operations Manager supports SQL Server Reporting Services in native mode only; do not use SharePoint integrated mode.

  • Both .NET Framework 3.5 SP1 and .NET Framework 4 are required. For more information, see the following documents:

Operations Manager Data Warehouse

  • Disk space: The data warehouse database must have at least 1024 MB free hard disk space. This is enforced at the time of database creation, and the required disk space will likely grow significantly. For information about requirements in SQL Server Planning, see Installing SQL Server 2008 or Installing SQL Server 2008 R2.

  • File system: %SYSTEMDRIVE% must be formatted with the NTFS file system.

  • Operating System: Windows Server 2008 SP2 or Windows Server 2008 R2 SP1.

  • Processor Architecture: x64.

  • Windows Installer version: at least Windows Installer 3.1.

  • Microsoft SQL Server: Microsoft SQL Server: SQL Server 2008 SP1, SQL Server 2008 SP2, SQL Server 2008 SP3, SQL Server 2008 R2, SQL Server 2008 R2 SP1, SQL Server 2008 R2 SP2, SQL Server 2012, or SQL Server 2012 SP1.

  • SQL Server Full Text Search is required.

  • Both .NET Framework 3.5 SP1 and .NET Framework 4 are required for Setup to run. For more information, see the following documents:

Operations Manager Gateway Server

  • Disk space: %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.

  • Server Operating System: must be Windows Server 2008 R2 SP1.

  • Processor Architecture: must be x64.

  • Windows PowerShell version: Windows PowerShell version 2.0.

  • Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the management server.

  • .NET Framework 4 is required if the Gateway server manages UNIX/Linux agents or network devices.

Supported Firewall Scenarios

The following table shows Operations Manager feature interaction across a firewall, including information about the ports used for communication between the features, which direction to open the inbound port, and whether the port number can be changed.

Operations Manager 2012 Firewall Scenarios

Operations Manager Feature A

Port number and direction

Feature B

Configurable

Note

Management server

1433 --->

Operational database

Yes (Setup)

Management server

1434 UDP < ---

Operational database

No

If the operational database is installed on a named instance of SQL Server 2008 SP1, SQL Server 2008 SP2, SQL Server 2008 SP3, SQL Server 2008 R2, SQL Server 2008 R2 SP1, or SQL Server 2008 R2 SP2 such as in a cluster, and the Windows Firewall is enabled on the management server, you have to also open UDP 1434 inbound on the management server.

Management server

5723, 5724 --->

Management server

No

Port 5724 must be open to install this feature and can be closed after this feature has been installed.

Management server

1433 -->

Reporting data warehouse

No

Reporting server

5723, 5724 --->

Management server

No

Port 5724 must be open to install this feature and can be closed after this feature has been installed.

Operations console

5724 --->

Management server

No

Connector Framework source

51905 --->

Management server

No

Web console server

Selected web site port --->

Management server

No

Web console (for Application Diagnostics

1433, 1434 --->

Operational database

Yes (Setup)

Web console (for Application Advisor)

1433, 1434 --->

Data warehouse

Yes (Setup)

Web console (for Application Advisor)

80 --->

SQL Server Reporting Services

No

Web console browser

80, 443 --->

web console server

Yes (IIS Admin)

Default for HTTP or SSL.

For either Network Authentication or Mixed Authentication, an account name and password can be sent as part of the request. We recommend you use SSL.

Agent installed by using MOMAgent.msi

5723 --->

Management server

Yes (Setup)

Agent installed by using MOMAgent.msi

5723 --->

Management server

Yes (Setup)

Agent installed by using MOMAgent.msi

5723 --->

Gateway server

Yes (Setup)

Gateway server

5723 --->

Management server

Yes (Setup)

Agent (Audit Collection Services (ACS) forwarder)

51909 --->

Management server Audit Collection Services (ACS) Collector

Yes (Registry)

Agentless Exception Monitoring data from client

51906 --->

Management server Agentless Exception Monitoring (AEM) file share

Yes (Client Monitoring Wizard)

Customer Experience Improvement Program data from client

51907 --->

Management server (Customer Experience Improvement Program) Endpoint

Yes (Client Monitoring Wizard)

Operations console (reports)

80 --->

SQL Server Reporting Services

No

The Operations console uses port 80 to connect to the SQL Server Reporting Services website.

Reporting server

1433 --->

Reporting data warehouse

Yes

Management server (Audit Collection Services Collector)

1433 --->

Audit Collection Services (ACS) database

Yes

Management Server

161, 162 <--->

Network device

Yes

All firewalls between the management servers in the resource pool and the network devices need to allow SNMP (UDP) and ICMP bi-directionally, and ports 161 and 162 need to be open bi-directionally. This includes Windows Firewall on the management server itself.

If your network devices are using a port other than 161 and 162, you need to open bi-directional UDP traffic on these ports as well.

Management server or gateway server

1270 --- >

UNIX or Linux computer

No

Management server or gateway server

22 --- >

UNIX or Linux computer

Yes

In the preceding table, if SQL Server 2008 SP1, SQL Server 2008 SP2, SQL Server 2008 SP3, SQL Server 2008 R2, SQL Server 2008 R2 SP1, or SQL Server 2008 R2 SP2 is installed by using a default instance, the port number is 1433. If SQL Server is installed with a named instance, it is probably using a dynamic port. To identify the port, do the following:

  1. Run SQL Server Configuration Manager.

  2. Open SQL Server Network Configuration.

  3. Open Protocols for INSTANCE1 (or the instance that is running under it).

  4. Open TCP/IP.

  5. Click IP Addresses.

  6. The port is under IPAll (usually the TCP Dynamic Ports).

Minimum Network Connectivity Speeds

Operations Manager requires the following minimum network connectivity speeds between the specified features.

Feature A

Feature B

Minimum requirement

Management server

Agent

64 Kbps

Management server

Agentless

1024 Kbps

Management server

Database

256 Kbps

Management server

Console

768 Kbps

Management server

Management server

64 Kbps

Management server

Data warehouse database

768 Kbps

Management server

Reporting server

256 Kbps

Management server

Gateway server

64 Kbps

Local management group

Connected management group (tiered)

1024 Kbps

Web console server

web console

128 Kbps

Reporting Data Warehouse

Reporting server

1024 Kbps

Console

Reporting server

768 Kbps

Audit collector

Audit database

768 Kbps

Supported Cluster Configurations

Operations Manager supports the clustering configurations for Operations Manager features as shown in the following table:

Warning

Clustering of management servers is not supported in System Center 2012 – Operations Manager.

Only Cluster service quorum node clusters are supported. Multisite clusters (geographically dispersed clusters) are supported for all Operations Manager cluster roles. You can use replication technology to help provide high availability for data in Operations Manager, but the latency of communications between components introduce risks to data replication and might introduce failover issues. We recommend that you use synchronous mirroring of data disks between sites. Synchronous mirroring means that the data is fully synchronized across all sites and ensures the correct behavior of applications in the event of failover across sites.

Important

Microsoft is not obligated to release a hotfix on any Operations Manager issue that cannot be reproduced in a non-multisite cluster environment. If an analysis determines that non-Microsoft components in the configuration are causing the issue, the customer must work with the appropriate vendor for those components.

Server Feature

Cluster

Notes

Operations Manager Operational database

Single Active-Passive cluster

Other Operations Manager features must not be installed on the cluster or nodes of the cluster.

Operations Manager Reporting data warehouse

Single Active-Passive cluster

Other Operations Manager features must not be installed on the cluster or nodes of the cluster.

Audit Collection Services (ACS) database

Single Active-Passive cluster

Other Operations Manager features must not be installed on the cluster or nodes of the cluster.

Operations Manager supports the following clustering configurations for Operations Manager server roles, as shown in the following table; however, because of a potential performance effect on your computer running SQL Server, these configurations are not recommended:

Server Feature

Cluster

Notes

Operations Manager operational database and Operations Manager Reporting data warehouse.

Active-Active cluster where the operational database is installed on one node of the cluster and the Reporting data warehouse is installed on the other node of the cluster.

There might be some performance issues with SQL Server in this configuration.

Operations Manager operational database, Reporting data warehouse, and Audit Collection Services (ACS) database.

Single Active-Passive or Active-Active cluster where all three components are on a single cluster.

There might be some performance issues with SQL Server in this configuration.

Operations Manager operational database and Audit Collection Services database.

Single Active-Passive cluster where both components are on a single cluster.

There might be some performance issues with SQL Server in this configuration.

Operations Manager operational database and Reporting data warehouse.

Single Active-Passive cluster where both components are on a single cluster.

There might be some performance issues with SQL Server in this configuration.

Reporting data warehouse and Audit Collection Services database.

Single Active-Passive cluster where both components are on a single cluster.

There might be some performance issues with SQL Server in this configuration.

Monitored Item Capacity

Operations Manager supports the following number of monitored items.

Monitored item

Recommended limit

Simultaneous Operations consoles

50

Agent-monitored computers reporting to a management server

3,000

Agent-monitored computers reporting to a gateway server

2,000

Agentless Exception Monitored (AEM)-computers per dedicated management server

25,000

Agentless Exception Monitored (AEM)-computers per management group

100,000

Collective client monitored computers per management server

2,500

Management servers per agent for multihoming

4

Agentless-managed computers per management server

10

Agentless-managed computers per management group

60

Agent-managed and UNIX or Linux computers per management group

6,000 (with 50 open consoles); 15,000 (with 25 open consoles)

UNIX or Linux computers per dedicated management server

500

UNIX or Linux computers monitored per dedicated gateway server

100

Network devices managed by a resource pool with three or more management servers

1,000

Network devices managed by two resource pools

2,000

Agents for Application Performance Monitoring (APM)

700

Applications for Application Performance Monitoring (APM)

400

URLs monitored per dedicated management server

3000

URLs monitored per dedicated management group

12,000

URLs monitored per agent

50

Operations Manager Feature Firewall Exceptions

Feature

Exception

Port and protocol

Configured by

Management server

  • System Center Management service

  • System Center Data Access service

  • Operations Manager Connector Framework

  • Operations Manager Customer Experience Improvement

  • Operations Manager Application Error Monitoring

5723/TCP

5724/TCP

51905/TCP

51907/TCP

51906/TCP

Setup

Setup

Setup

Setup

Setup

Web console

Operations Manager web console

Selected web site port/TCP

Setup

Web console, http

World Wide Web Services, http

80/TCP

Windows Firewall

Web console, https

Secure World Wide Web Service, https

443/TCP

Windows Firewall

Operational database

  • SQL Server database server

  • If using a named instance, add.

1433/TCP

1434/UDP

Windows Firewall

Windows Firewall

Operations Manager data warehouse database

  • SQL Server database server

  • If using a named instance, add.

1433/TCP

1434/UDP

Windows Firewall

Windows Firewall

Operations Manager Reporting

SQL Server Reporting Services

80/TCP

Windows Firewall

Agent, manual installation of MOMAgent.msi

System Center Management service

5723/TCP

Windows Firewall

Agent, push installation

  • System Center Management service

  • File and Print Sharing

  • Remote Administration

5723/TCP

137/UDP, 138/UDP, 139/TCP, 445/TCP

135/TCP, 445/TCP

Windows Firewall

Windows Firewall

Windows Firewall

Agent, pending repair

  • System Center Management service

  • File and Print Sharing

  • Remote Administration

5723/TCP

137/UPD, 138/UPD, 139/TCP, 445/TCP

135/TCP, 445/TCP

Windows Firewall

Windows Firewall

Windows Firewall

Agent, pending upgrade

  • System Center Management service

  • File and Print Sharing

  • Remote Administration

5723/TCP

137/UDP, 138/UDP, 139/TCP, 445/TCP

135/TCP, 445/TCP

Windows Firewall

Windows Firewall

Windows Firewall

Gateway

System Center Management service

5723/TCP

Setup

Operations Manager Audit Collection Services database

  • SQL Server

  • If using a named instance, add.

1433/TCP

1434/UDP

Windows Firewall

Windows Firewall

Operations Manager Audit Collection Services Collector

ACS Collector Service

51909/TCP

Windows Firewall

Support for Languages in Addition to English

Operations Manager supports the following languages: English, German, French, Japanese, Spanish, Simplified Chinese, Russian, Italian, and Portuguese (Brazil).

Support for different languages

If your systems run a language other than English, you can install Operations Manager for that language. You also have the option of installing English Operations Manager for your management group.

For example, if you use a German version of a Windows operating system on all your servers, you can install German Operations Manager features for your entire management group, or you can optionally install English Operations Manager features for your entire management group.

Agents for different languages

If you use an English management group, you can monitor any Windows Operating System Locale type.

If you use another language, you can monitor Windows operating systems for English and that language. For instance, if you use a German management group, you can monitor only English and German Windows operating systems.

Console for different languages

Operations Manager consoles are language independent. For example, you can use an Italian Operations Manager console to connect to a German management group.

Supported Network Monitoring Scenarios

Operations Manager supports monitoring of network devices that support Simple Network Management Protocol (SNMP). Port monitoring is available for devices that have implemented the interface MIB (RFC 2863) and MIB-II (RFC 1213) standards. In addition, peripheral monitoring, including processor and memory monitoring, is supported on a subset of devices. For more information, see System Center Operations Manager 2012: Network Devices with Extended Monitoring Capability.

Operations Manager can identify connected devices in a recursive discovery that use an IPv6 address; however, the initial device that is discovered must use an IPv4 address.

For more information about supported network devices, see Network Devices Supported for Discovery by Operations Manager 2012.

Application Performance Monitoring Requirements

To view Application Performance Monitoring event details, you must install the Operations Manager web console. For more information, see How to Install the Operations Manager Web Console.

Application Performance Monitoring requires the following software:

  • .NET Framework 2.0, .NET Framework 3.5, .NET Framework 3.5 SP1, or .NET Framework 4.

  • Internet Information Services (IIS) 7.0. Application monitoring on a clustered IIS configuration is not supported.

  • ISAPI and CGI Restrictions in IIS be enabled for ASP.NET 4.0. To enable this, select the web server in IIS Manager, and then double-click ISAPI and CGI Restrictions. Select ASP.NET v4.0.30319, and then click Allow.

Additionally, you must start the SQL Server Agent service and set the startup type to automatic.