The Printer Migration Wizard and the Printbrm.exe command-line tool support all migrations to Windows Server 2008 R2.
|Although the Printer Migration Wizard supports migrations from servers running Windows Server 2003 or a Server Core installation, it cannot run on these servers directly. For information about migrating from servers running these operating systems, see Print Services Migration: Preparing to Migrate.|
Open the Print Management snap-in to access the Printer Migration Wizard:
If necessary, enable the Administrative Tools menu, which is hidden by default on Windows-based client operating systems.
Right-click Start, and then click Properties. The Start Menu and Taskbar Properties dialog box opens.
On the Start Menu tab, click Customize. The Customize Start Menu dialog box opens.
Under System Administrative Tools, select Display on the All Programs menu or Display on the All Programs menu and the Start menu.
- Right-click Start, and then click Properties. The Start Menu and Taskbar Properties dialog box opens.
In the Administrative Tools menu, click Print Management.
|The Print Management snap-in filter settings will not be migrated and need to be saved independently of the printer migration.|
To open a Command Prompt window, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
To view the complete syntax for this command, at a command prompt, type:
For a listing of the available syntax for the Printbrm.exe command, see Print Services Migration: Appendix A - Printbrm.exe Command-Line Tool Syntax.
The second step in the migration process is to prepare the destination server.
There are no specific hardware requirements for being a print server beyond those for the version of the server operating system you are using.
The amount of disk space needed for a migration is dependent on the number of print drivers to be migrated and the size of the drivers. Because print drivers can vary widely in size, the amount of disk space can range from one megabyte to several gigabytes.
Verify that hard drive space is sufficient on the destination server for the backup.
No additional software is needed other than the necessary drivers required for the printers to be hosted. Migrate these drivers from the source server.
For cross-architecture migrations, verify that the destination server contains drivers for each supported architecture.
You must install the Print and Document Services role on the destination server before you begin the migration process. For more information on installing this and other server roles, see the Server Manager documentation (http://go.microsoft.com/fwlink/?LinkId=133026).
If you are migrating from the x86-based architecture of Windows Server 2003 or Windows Server 2008 to the x64-based architecture of Windows Server 2008 R2, you should install x64-based drivers on the source server before creating the backup file. The migration process copies all installed drivers from the source server to the destination server. It recreates the printer queues on the destination server if the printer settings file contains the x64-based drivers.
Verify that each print queue on the source server has a driver installed for the operating system on the destination server before creating the printer settings file. For example, if you are migrating an x86-based source print server to an x64-based destination print server, verify that each print queue has an x64-based driver installed before you create the printer settings file. Any print queue that does not have a cross-architecture driver installed will not be migrated to the destination server.
To install cross-architecture drivers for a printer, you can use:
The Add Printer Driver Wizard, which is available in the Print Management snap-in.
The Printer Properties dialog box, which is available through the Printers folder in the Control Panel.
As a best practice, you need to install a driver with the same name as the native architecture. To add the x86-based driver to the x64-based destination server, use the x86-based client to remotely open the x64-based server using Windows Explorer and navigate to the remote printer folder and add the driver. To install an x64-based driver on the x86-based source server, use the x64-based client to remotely open the x86-based server using Windows Explorer and navigate to the remote printer folder and add the driver.
In the following instances, installing a feature on your destination server may require additional preparation before you migrate to it:
The server hosts Line Printer Remote (LPR) printers.
The server offers Internet Printing Protocol (IPP) printer connections.
The server hosts Web Services on Devices (WSD) printers.
The server is in a server cluster.
The server hosts plug and play printers.
For more information on these scenarios, see Print Services Migration: Appendix B - Additional Destination Server Scenarios.
Simple system-to-system migrations require no preparation for the source server. However, additional preparation is required for cross-architecture migrations. If performing the migration as quickly as possible is a priority, remove unused drivers, ports, and queues before starting the migration to improve its speed after verifying with users that the items to remove are no longer in use. In general, however, minimize changes to the source server environment to ensure you can roll back to this environment if necessary.
|If your source server is running multiple roles, renaming the source server or changing its IP address can cause other roles that are running on the source server to fail.|
|You should delete native print drivers that are not currently associated with a print queue because these drivers increase the size of the printer settings file unnecessarily. The print spooler will not allow a native print driver that is currently associated with a print queue to be deleted. The Print Spooler service will use non-native drivers. It routes these drivers to the Print Server service when a non-native client connects to a print queue and has to download a driver. You should remove any unused drivers and print queues. Do not delete a non-native driver with a corresponding native print driver that is associated with a print queue. In this instance, the Print Spooler service will not prevent the non-native driver from being deleted. If the non-native driver's architecture matches the destination server's architecture, then you must block the driver's deletion. Cross-architecture drivers will never appear to be loaded by the Print Spooler service. Administrators should only delete them after confirming the drivers are no longer needed.|
Open the Print Management snap-in. Click Start, click Administrative Tools, and then click Print Management.
In the Print Management tree, under Print Servers, click the print server you want.
Under the print server, right-click Drivers and then select Add Driver to open the Add Printer Driver Wizard.
Follow the steps as indicated by the wizard.
Click Start, click Control Panel, and double-click Printers.
Select Printer. Right-click Sharing.
Click Additional Drivers and select Processor from the list.
Follow the instructions in the dialog boxes to install the correct driver. Only install the driver associated with the printer you are administering.
|You can only add a cross-architecture driver if you have already installed a native architecture version of the same driver.|
ConceptsPrint Services Migration Guide
Print Services Migration: Migrating the Print and Document Services Role
Print Services Migration: Verifying the Migration
Print Services Migration: Post-Migration Tasks
Print Services Migration: Appendix A - Printbrm.exe Command-Line Tool Syntax
Print Services Migration: Appendix B - Additional Destination Server Scenarios