Table of contents
TLS
TOC
Collapse the table of content
Expand the table of content

New-SRGroup

Last Updated: 4/3/2017

SYNOPSIS

Creates a replication group.

SYNTAX

New-SRGroup [[-ComputerName] <String>] [-Name] <String> [-VolumeName] <String[]> [-LogVolumeName] <String>
 [[-LogSizeInBytes] <UInt64>] [[-Description] <String>] [-EnableConsistencyGroups] [-EnableEncryption] [-Force]
 [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [<CommonParameters>]

DESCRIPTION

The New-SRGroup cmdlet creates a replication group. A replication group contains one or more data volumes and an associated log volume. A replication group is the container for replication.

EXAMPLES

Example 1: Create a replication group

PS C:\>New-SRGroup -ComputerName "SR-SRV05" -Name "ReplicationGroup01" -VolumeName "D:" -LogVolumeName "E:" 
AllowVolumeResize  : False
AsyncRPO           : 
ComputerName       : SR-SRV05
Description        : 
Id                 : 7b44e4bd-3fd8-411d-a6d1-1a6bb704520f
IsAutoFailover     : 
IsCluster          : False
IsEncrypted        : False
IsInPartnership    : False
IsPrimary          : 
IsSuspended        : 
IsWriteConsistency : False
LastInSyncTime     : 
LogSizeInBytes     : 8589934592
LogVolume          : e:\ 
Name               : ReplicationGroup01
NumOfReplicas      : 1
Partitions         : {bc49f059-4f78-464d-b88a-3a092108816e}
Replicas           : {MSFT_WvrReplica (PartitionId =
                     "bc49f059-4f78-464d-b88a-3a092108816e")}
ReplicationMode    : Synchronous
ReplicationStatus  : NotInPartnership
PSComputerName     :

This command creates a replication group for server named SR-SRV05. The command specifies the replicated volume and the log volume. Because this command does not specify other parameters, the replication group uses default values. Replication does not start until you run the New-SRPartnership cmdlet.

Example 2: Create a replication group that uses custom properties

PS C:\>New-SRGroup -ComputerName "SR-SRV05" -Name "ReplicationGroup02" -VolumeName "D:" -LogVolumeName "E:" -LogSizeInBytes 32GB -EnableEncryption
AllowVolumeResize  : False
AsyncRPO           : 
ComputerName       : SR-SRV05
Description        : 
Id                 : 1b0962d1-0771-49cb-bde5-7298db488263
IsAutoFailover     : 
IsCluster          : False
IsEncrypted        : True
IsInPartnership    : False
IsPrimary          : 
IsSuspended        : 
IsWriteConsistency : False
LastInSyncTime     : 
LogSizeInBytes     : 34359738368
LogVolume          : e:\ 
Name               : ReplicationGroup02
NumOfReplicas      : 1
Partitions         : {bc49f059-4f78-464d-b88a-3a092108816e}
Replicas           : {MSFT_WvrReplica (PartitionId =
                     "bc49f059-4f78-464d-b88a-3a092108816e")}
ReplicationMode    : Synchronous
ReplicationStatus  : NotInPartnership
PSComputerName     :

This command creates a replication group for server named SR-SRV05. The command specifies the replicated volume and the log volume. The command also specifies a custom log size in GB and enables replication traffic encryption. Replication does not start until you run New-SRPartnership.

PARAMETERS

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type: CimSession[]
Parameter Sets: (All)
Aliases: Session

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ComputerName

Specifies a single replica host computer NetBIOS name or fully qualified domain name (FQDN) of a computer to belong to the replication group. The default value is the local computer.

Type: String
Parameter Sets: (All)
Aliases: CN

Required: False
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Description

Specifies a description for the replication group.

Type: String
Parameter Sets: (All)
Aliases: D

Required: False
Position: 5
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-EnableConsistencyGroups

Indicates that consistency groups are enabled for the replication group that contains multiple volumes. Consistency groups provide write ordering. This can be important, for example, for replication of application data on multiple volumes.

If you enable consistency groups, it may decrease replication and write Input/Output performance.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: EC

Required: False
Position: 6
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-EnableEncryption

Indicates that this partnership should encrypt connection by using SMB AES-128-GCM. Enabling encryption can protect Storage Replica block transfers from man-in-the-middle interception or reading. Enabling encryption decreases performance.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: EE

Required: False
Position: 7
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Force

Forces the command to run without asking for user confirmation.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: F

Required: False
Position: 100
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-LogSizeInBytes

Specifies the aggregate size of log files on each server in the replication group for the volumes that are associated with this replication group. The minimum size 512MB. You can specify a value by using the Windows PowerShell byte conversion capability, such as 4GB or 3200MB.

A value that is too small may cause decreased replication performance or increased recovery time after an interruption between computers.

Type: UInt64
Parameter Sets: (All)
Aliases: LS

Required: False
Position: 4
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-LogVolumeName

Specifies a drive letter, mount point path, or volume GUID where Storage Replication creates destination replication logs. The value must contain an NTFS-formatted volume or ReFS-formatted volume. The path must exist. The path cannot be a mapped drive or UNC path.

Storage Replication creates logs in the System Volume Information folder.

Type: String
Parameter Sets: (All)
Aliases: LV

Required: True
Position: 3
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Name

Specifies a name for the replication group.

Type: String
Parameter Sets: (All)
Aliases: N

Required: True
Position: 1
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type: Int32
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-VolumeName

Specifies an array of drive letters or mount point paths for the replica. The volumes must exist. The volumes cannot be mapped drives or UNC paths.

This is an ordered list. The order of volumes determines the order of replication. For more information, see the DestinationVolumeName parameter of the New-SRPartnership cmdlet.

We do not recommend replicating different drive letters or mount point paths. The practice can cause application failures because of stored settings after a failover occurs.

Type: String[]
Parameter Sets: (All)
Aliases: VN

Required: True
Position: 2
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

OUTPUTS

replicationgroup

NOTES

Get-SRGroup

New-SRPartnership

Remove-SRGroup

Set-SRGroup

Suspend-SRGroup

Sync-SRGroup

© 2017 Microsoft