User State Migration Tool (USMT) return codes

This article describes USMT 10.0 return codes and error messages. Also included is a table listing the USMT return codes with their associated mitigation steps. In addition, this article provides tips to help you use the logfiles to determine why you received an error.

Understanding the requirements for running USMT can help minimize errors in your USMT migrations. For more information, see USMT Requirements.

Return codes used by USMT

If you encounter an error in your USMT migration, you can use return codes and the more specific information provided in the associated USMT error messages to troubleshoot the issue and to identify mitigation steps.

Return codes are grouped into the following broad categories that describe their area of error reporting:

  • Success or User Cancel

  • Invalid Command Lines

  • Setup and Initialization

  • Non-fatal Errors

  • Fatal Errors

As a best practice, we recommend that you set verbosity level to 5, v:5, on the ScanState.exe, LoadState.exe, and UsmtUtils.exe command lines so that the most detailed reporting is available in the respective USMT logs. You can use a higher verbosity level if you want the log files output to go to a debugger.

USMT error messages

Error messages provide more detailed information about the migration problem than the associated return code. For example, the ScanState, LoadState, or UsmtUtils tool might return a code of 11 (for USMT_INVALID_PARAMETERS) and a related error message that reads /key and /keyfile both specified. The error message is displayed at the command prompt and is identified in the ScanState, LoadState, or UsmtUtils log files to help you determine why the return code was received.

You can obtain more information about any listed Windows system error codes by typing in a command prompt window net.exe helpmsg <error_number> where <error_number> is the error code number generated by the error message. For more information about System Error Codes, see System Error Codes (0-499).

Troubleshooting return codes and error messages

The following information lists each return code by numeric value, along with the associated error messages and suggested troubleshooting actions.

0: USMT_SUCCESS

  • Category: Success or User Cancel
Error message Troubleshooting, mitigation, workarounds
Successful run NA

1: USMT_DISPLAY_HELP

  • Category: Success or User Cancel
Error message Troubleshooting, mitigation, workarounds
Command line help requested NA

2: USMT_STATUS_CANCELED

  • Category: Success or User Cancel
Error message Troubleshooting, mitigation, workarounds
Gather was aborted because of an EFS file NA
User chose to cancel (such as pressing CTRL+C) NA

3: USMT_WOULD_HAVE_FAILED

  • Category:
Error message Troubleshooting, mitigation, workarounds
At least one error was skipped as a result of /c. Review ScanState, LoadState, or UsmtUtils log for details about command-line errors.

11: USMT_INVALID_PARAMETERS

  • Category: Invalid Command Lines
Error message Troubleshooting, mitigation, workarounds
/all conflicts with /ui, /ue or /uel Review ScanState log or LoadState log for details about command-line errors.
/auto expects an optional parameter for the script folder Review ScanState log or LoadState log for details about command-line errors.
/encrypt can't be used with /nocompress Review ScanState log or LoadState log for details about command-line errors.
/encrypt requires /key or /keyfile Review ScanState log or LoadState log for details about command-line errors.
/genconfig can't be used with most other options Review ScanState log or LoadState log for details about command-line errors.
/genmigxml can't be used with most other options Review ScanState log or LoadState log for details about command-line errors.
/hardlink requires /nocompress Review ScanState log or LoadState log for details about command-line errors.
/key and /keyfile both specified Review ScanState log or LoadState log for details about command-line errors.
/key or /keyfile used without enabling encryption Review ScanState log or LoadState log for details about command-line errors.
/lae is only used with /lac Review ScanState log or LoadState log for details about command-line errors.
/listfiles cannot be used with /p Review ScanState log or LoadState log for details about command-line errors.
/offline requires a valid path to an XML file describing offline paths Review ScanState log or LoadState log for details about command-line errors.
/offlinewindir requires a valid path to offline windows folder Review ScanState log or LoadState log for details about command-line errors.
/offlinewinold requires a valid path to offline windows folder Review ScanState log or LoadState log for details about command-line errors.
A command was already specified Verify that the command-line syntax is correct and that there are no duplicate commands.
An option argument is missing Review ScanState log or LoadState log for details about command-line errors.
An option is specified more than once and is ambiguous Review ScanState log or LoadState log for details about command-line errors.
By default /auto selects all users and uses the highest log verbosity level. Switches like /all, /ui, /ue, /v are not allowed. Review ScanState log or LoadState log for details about command-line errors.
Command line arguments are required. Specify /? for options. Review ScanState log or LoadState log for details about command-line errors.
Command line option is not valid Review ScanState log or LoadState log for details about command-line errors.
EFS parameter specified is not valid for /efs Review ScanState log or LoadState log for details about command-line errors.
File argument is invalid for /genconfig Review ScanState log or LoadState log for details about command-line errors.
File argument is invalid for /genmigxml Review ScanState log or LoadState log for details about command-line errors.
Invalid space estimate path. Check the parameters and/or file system permissions Review ScanState log or LoadState log for details about command-line errors.
List file path argument is invalid for /listfiles Review ScanState log or LoadState log for details about command-line errors.
Retry argument must be an integer Review ScanState log or LoadState log for details about command-line errors.
Settings store argument specified is invalid Review ScanState log or LoadState log for details about command-line errors. Make sure that the store path is accessible and that the proper permission levels are set.
Specified encryption algorithm is not supported Review ScanState log or LoadState log for details about command-line errors.
The /efs:hardlink requires /hardlink Review ScanState log or LoadState log for details about command-line errors.
The /targetWindows7 option is only available for Windows XP, Windows Vista, and Windows 7 Review ScanState log or LoadState log for details about command-line errors.
The store parameter is required but not specified Review ScanState log or LoadState log for details about command-line errors.
The source-to-target domain mapping is invalid for /md Review ScanState log or LoadState log for details about command-line errors.
The source-to-target user account mapping is invalid for /mu Review ScanState log or LoadState log for details about command-line errors.
Undefined or incomplete command line option Review ScanState log or LoadState log for details about command-line errors.
Use /nocompress, or provide an XML file path with /p"pathtoafile" to get a compressed store size estimate Review ScanState log or LoadState log for details about command-line errors.
User exclusion argument is invalid Review ScanState log or LoadState log for details about command-line errors.
Verbosity level must be specified as a sum of the desired log options: Verbose (0x01), Record Objects (0x04), Echo to debug port (0x08) Review ScanState log or LoadState log for details about command-line errors.
Volume shadow copy feature is not supported with a hardlink store Review ScanState log or LoadState log for details about command-line errors.
Wait delay argument must be an integer Review ScanState log or LoadState log for details about command-line errors.

12: USMT_ERROR_OPTION_PARAM_TOO_LARGE

  • Category: Invalid Command Lines
Error message Troubleshooting, mitigation, workarounds
Command line arguments cannot exceed 256 characters Review ScanState log or LoadState log for details about command-line errors.
Specified settings store path exceeds the maximum allowed length of 256 characters Review ScanState log or LoadState log for details about command-line errors.

13: USMT_INIT_LOGFILE_FAILED

  • Category: Invalid Command Lines
Error message Troubleshooting, mitigation, workarounds
Log path argument is invalid for /l When /l is specified in the ScanState command line, USMT validates the path. Verify that the drive and other information, for example file system characters, are correct.

14: USMT_ERROR_USE_LAC

  • Category: Invalid Command Lines
Error message Troubleshooting, mitigation, workarounds
Unable to create a local account because /lac was not specified When creating local accounts, the command-line options /lac and /lae should be used.

26: USMT_INIT_ERROR

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Multiple Windows installations found Listfiles.txt couldn't be created. Verify that the location you specified for the creation of this file is valid.
Software malfunction or unknown exception Check all loaded .xml files for errors, common error when using /i to load the Config.xml file.
Unable to find a valid Windows directory to proceed with requested offline operation; Check if offline input file is present and has valid entries Verify that the offline input file is present and that it has valid entries. USMT couldn't find valid offline operating system. Verify your offline directory mapping.

27: USMT_INVALID_STORE_LOCATION

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
A store path can't be used because an existing store exists; specify /o to overwrite Specify /o to overwrite an existing intermediate or migration store.
A store path is missing or has incomplete data Make sure that the store path is accessible and that the proper permission levels are set.
An error occurred during store creation Make sure that the store path is accessible and that the proper permission levels are set. Specify /o to overwrite an existing intermediate or migration store.
An inappropriate device such as a floppy disk was specified for the store Make sure that the store path is accessible and that the proper permission levels are set.
Invalid store path; check the store parameter and/or file system permissions Invalid store path; check the store parameter and/or file system permissions.
The file layout and/or file content is not recognized as a valid store Make sure that the store path is accessible and that the proper permission levels are set. Specify /o to overwrite an existing intermediate or migration store.
The store path holds a store incompatible with the current USMT version Make sure that the store path is accessible and that the proper permission levels are set.
The store save location is read-only or does not support a requested storage option Make sure that the store path is accessible and that the proper permission levels are set.

28: USMT_UNABLE_GET_SCRIPTFILES

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Script file is invalid for /i Check all specified migration .xml files for errors. This error is common when using /i to load the Config.xml file.
Unable to find a script file specified by /i Verify the location of your script files, and ensure that the command-line options are correct.

29: USMT_FAILED_MIGSTARTUP

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
A minimum of 250 MB of free space is required for temporary files Verify that the system meets the minimum temporary disk space requirement of 250 MB. As a workaround, you can set the environment variable USMT_WORKING_DIR=<path> to redirect the temporary files working directory.
Another process is preventing migration; only one migration tool can run at a time Check the ScanState log file for migration .xml file errors.
Failed to start main processing, look in log for system errors or check the installation Check the ScanState log file for migration .xml file errors.
Migration failed because of an XML error; look in the log for specific details Check the ScanState log file for migration .xml file errors.
Unable to automatically map the drive letters to match the online drive letter layout; Use /offline to provide a mapping table Check the ScanState log file for migration .xml file errors.

31: USMT_UNABLE_FINDMIGUNITS

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
An error occurred during the discover phase; the log should have more specific information Check the ScanState log file for migration .xml file errors.

32: USMT_FAILED_SETMIGRATIONTYPE

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
An error occurred processing the migration system Check the ScanState log file for migration .xml file errors, or use online Help by typing /? on the command line.

33: USMT_UNABLE_READKEY

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Error accessing the file specified by the /keyfile parameter Check the ScanState log file for migration .xml file errors, or use online Help by typing /? on the command line.
The encryption key must have at least one character Check the ScanState log file for migration .xml file errors, or use online Help by typing /? on the command line.

34: USMT_ERROR_INSUFFICIENT_RIGHTS

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Directory removal requires elevated privileges Sign in as Administrator, and run with elevated privileges.
No rights to create user profiles; log in as Administrator; run with elevated privileges Sign in as Administrator, and run with elevated privileges.
No rights to read or delete user profiles; log in as Administrator, run with elevated privileges Sign in as Administrator, and run with elevated privileges.

35: USMT_UNABLE_DELETE_STORE

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
A reboot is required to remove the store Reboot to delete any files that couldn't be deleted when the command was executed.
A store path can't be used because it contains data that could not be overwritten A migration store couldn't be deleted. If you're using a hardlink migration store, you might have a locked file in it. You should manually delete the store, or use UsmtUtils.exe /rd command to delete the store.
There was an error removing the store Review ScanState log or LoadState log for details about command-line errors.

36: USMT_ERROR_UNSUPPORTED_PLATFORM

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Compliance check failure; please check the logs for details Investigate whether there's an active temporary profile on the system.
Use of /offline is not supported during apply The /offline command wasn't used while running in the Windows Preinstallation Environment (WinPE).
Use /offline to run gather on this platform The /offline command wasn't used while running in WinPE.

37: USMT_ERROR_NO_INVALID_KEY

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
The store holds encrypted data but the correct encryption key was not provided Verify that the correct encryption key or keyfile was included with the /key or /keyfile option.

38: USMT_ERROR_CORRUPTED_NOTENCRYPTED_STORE

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
An error occurred during store access Review ScanState log or LoadState log for details about command-line errors. Make sure that the store path is accessible and that the proper permission levels are set.

39: USMT_UNABLE_TO_READ_CONFIG_FILE

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Error reading Config.xml Review ScanState log or LoadState log for details about command-line errors in the Config.xml file.
File argument is invalid for /config Check the command line you used to load the Config.xml file. You can use online Help by typing /? on the command line.

40: USMT_ERROR_UNABLE_CREATE_PROGRESS_LOG

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Error writing to the progress log The Progress log couldn't be created. Verify that the location is valid and that you have write access.
Progress log argument is invalid for /progress The Progress log couldn't be created. Verify that the location is valid and that you have write access.

41: USMT_PREFLIGHT_FILE_CREATION_FAILED

  • Category: Setup and Initialization
Error message Troubleshooting, mitigation, workarounds
Can't overwrite existing file The Progress log couldn't be created. Verify that the location is valid and that you have write access.
Invalid space estimate path. Check the parameters and/or file system permissions Review ScanState log or LoadState log for details about command-line errors.

42: USMT_ERROR_CORRUPTED_STORE

  • Category:
Error message The store contains one or more corrupted files
The store holds encrypted data but the correct encryption key was not provided Review UsmtUtils log for details about the corrupted files. For information on how to extract the files that aren't corrupted, see Extract files from a compressed USMT migration store.

61: USMT_MIGRATION_STOPPED_NONFATAL

  • Category: Non-fatal Errors
Error message The store contains one or more corrupted files
Processing stopped due to an I/O error USMT exited but can continue with the /c command-line option, with the optional configurable <ErrorControl> section or by using the /vsc command-line option.

71: USMT_INIT_OPERATING_ENVIRONMENT_FAILED

  • Category: Fatal Errors
Error message Troubleshooting, mitigation, workarounds
A Windows Win32 API error occurred Data transfer has begun, and there was an error during the creation of migration store or during the apply phase. Review the ScanState log or LoadState log for details.
An error occurred when attempting to initialize the diagnostic mechanisms such as the log Data transfer has begun, and there was an error during the creation of migration store or during the apply phase. Review the ScanState log or LoadState log for details.
Failed to record diagnostic information Data transfer has begun, and there was an error during the creation of migration store or during the apply phase. Review the ScanState log or LoadState log for details.
Unable to start. Make sure you are running USMT with elevated privileges Exit USMT and sign in again with elevated privileges.

72: USMT_UNABLE_DOMIGRATION

  • Category: Fatal Errors
Error message Troubleshooting, mitigation, workarounds
An error occurred closing the store Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.
An error occurred in the apply process Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.
An error occurred in the gather process Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.
Out of disk space while writing the store Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.
Out of temporary disk space on the local system Data transfer has begun, and there was an error during migration-store creation or during the apply phase. Review the ScanState log or LoadState log for details.

Data collection

If you need assistance from Microsoft support, we recommend you collect the information by following the steps mentioned in Gather information by using TSS for deployment-related issues.

User State Migration Tool (USMT) troubleshooting

USMT log files