Get-Mailbox

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Get-Mailbox cmdlet to view mailbox objects and attributes, populate property pages, or supply mailbox information to other tasks.

Note: In Exchange Online PowerShell, we recommend that you use the Get-EXOMailbox cmdlet instead of this cmdlet. For more information, see Connect to Exchange Online PowerShell.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Get-Mailbox
   [-Anr <String>]
   [-Arbitration]
   [-Archive]
   [-AuditLog]
   [-AuxAuditLog]
   [-Credential <PSCredential>]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-GroupMailbox]
   [-IgnoreDefaultScope]
   [-InactiveMailboxOnly]
   [-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames]
   [-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames]
   [-IncludeAcceptMessagesOnlyFromWithDisplayNames]
   [-IncludeEmailAddressDisplayNames]
   [-IncludeInactiveMailbox]
   [-Migration]
   [-Monitoring]
   [-OrganizationalUnit <OrganizationalUnitIdParameter>]
   [-PublicFolder]
   [-ReadFromDomainController]
   [-RecipientTypeDetails <RecipientTypeDetails[]>]
   [-RemoteArchive]
   [-ResultSize <Unlimited>]
   [-ServiceSafetyConfiguration]
   [-SoftDeletedMailbox]
   [-SortBy <String>]
   [-SupervisoryReviewPolicy]
   [<CommonParameters>]
Get-Mailbox
   [-Database <DatabaseIdParameter>]
   [-Arbitration]
   [-Archive]
   [-AuditLog]
   [-AuxAuditLog]
   [-Credential <PSCredential>]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-GroupMailbox]
   [-IgnoreDefaultScope]
   [-Migration]
   [-Monitoring]
   [-OrganizationalUnit <OrganizationalUnitIdParameter>]
   [-PublicFolder]
   [-ReadFromDomainController]
   [-RecipientTypeDetails <RecipientTypeDetails[]>]
   [-RemoteArchive]
   [-ResultSize <Unlimited>]
   [-SortBy <String>]
   [-SupervisoryReviewPolicy]
   [<CommonParameters>]
Get-Mailbox
   [[-Identity] <MailboxIdParameter>]
   [-Arbitration]
   [-Archive]
   [-AuditLog]
   [-AuxAuditLog]
   [-Credential <PSCredential>]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-GroupMailbox]
   [-IgnoreDefaultScope]
   [-InactiveMailboxOnly]
   [-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames]
   [-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames]
   [-IncludeAcceptMessagesOnlyFromWithDisplayNames]
   [-IncludeEmailAddressDisplayNames]
   [-IncludeInactiveMailbox]
   [-Migration]
   [-Monitoring]
   [-OrganizationalUnit <OrganizationalUnitIdParameter>]
   [-PublicFolder]
   [-ReadFromDomainController]
   [-RecipientTypeDetails <RecipientTypeDetails[]>]
   [-RemoteArchive]
   [-ResultSize <Unlimited>]
   [-ServiceSafetyConfiguration]
   [-SoftDeletedMailbox]
   [-SortBy <String>]
   [-SupervisoryReviewPolicy]
   [<CommonParameters>]
Get-Mailbox
   [-Server <ServerIdParameter>]
   [-Arbitration]
   [-Archive]
   [-AuditLog]
   [-AuxAuditLog]
   [-Credential <PSCredential>]
   [-DomainController <Fqdn>]
   [-Filter <String>]
   [-GroupMailbox]
   [-IgnoreDefaultScope]
   [-Migration]
   [-Monitoring]
   [-OrganizationalUnit <OrganizationalUnitIdParameter>]
   [-PublicFolder]
   [-ReadFromDomainController]
   [-RecipientTypeDetails <RecipientTypeDetails[]>]
   [-RemoteArchive]
   [-ResultSize <Unlimited>]
   [-SortBy <String>]
   [-SupervisoryReviewPolicy]
   [<CommonParameters>]
Get-Mailbox
   [-MailboxPlan <MailboxPlanIdParameter>]
   [-Archive]
   [-Filter <String>]
   [-GroupMailbox]
   [-InactiveMailboxOnly]
   [-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames]
   [-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames]
   [-IncludeAcceptMessagesOnlyFromWithDisplayNames]
   [-IncludeEmailAddressDisplayNames]
   [-IncludeInactiveMailbox]
   [-Migration]
   [-OrganizationalUnit <OrganizationalUnitIdParameter>]
   [-PublicFolder]
   [-RecipientTypeDetails <RecipientTypeDetails[]>]
   [-ResultSize <Unlimited>]
   [-ServiceSafetyConfiguration]
   [-SoftDeletedMailbox]
   [-SortBy <String>]
   [<CommonParameters>]

Description

When you use the Get-Mailbox cmdlet in on-premises Exchange environments to view the quota settings for a mailbox, you first need to check the value of the UseDatabaseQuotaDefaults property. The value True means per-mailbox quota settings are ignored, and you need to use the Get-MailboxDatabase cmdlet to see the actual values. If the UseDatabaseQuotaDefaults property is False, the per-mailbox quota settings are used, so what you see with the Get-Mailbox cmdlet are the actual quota values for the mailbox.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Get-Mailbox -ResultSize unlimited

This example returns a summary list of all the mailboxes in your organization.

Example 2

Get-Mailbox -OrganizationalUnit Users

This example returns a list of all the mailboxes in your organization in the Users OU.

Example 3

Get-Mailbox -Anr Chr

This example returns all the mailboxes that resolve from the ambiguous name resolution search on the string "Chr". This example returns mailboxes for users such as Chris Ashton, Christian Hess, and Christa Geller.

Example 4

Get-Mailbox -Archive -Database MBXDB01

This example returns a summary list of all archive mailboxes in the database named MBXDB01.

Example 5

Get-Mailbox -Identity ed@contoso.com -RemoteArchive

This example returns information about the remote archive mailbox for the user ed@contoso.com.

Parameters

-Anr

The Anr parameter specifies a string on which to perform an ambiguous name resolution (ANR) search. You can specify a partial string and search for objects with an attribute that matches that string. The default attributes searched are:

  • CommonName (CN)
  • DisplayName
  • FirstName
  • LastName
  • Alias
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Arbitration

This parameter is available only in on-premises Exchange.

The Arbitration switch specifies whether to return only arbitration mailboxes in the results. You don't need to specify a value with this switch.

Arbitration mailboxes are system mailboxes that are used for storing different types of system data and for managing messaging approval workflow.

To return arbitration mailboxes that are used to store audit log settings or data, don't use this switch. Instead, use the AuditLog or AuxAuditLog switches.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Archive

The Archive switch specifies whether to return only mailboxes that have an archive enabled in the results. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AuditLog

This parameter is available only in on-premises Exchange.

The AuditLog switch specifies whether to return only audit log mailboxes in the results. You don't need to specify a value with this switch.

Audit log mailboxes are arbitration mailboxes that are used to store audit log settings.

To return other types of arbitration mailboxes, don't use this switch. Instead, use the Arbitration switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-AuxAuditLog

This parameter is available only in on-premises Exchange.

The AuxAuditLog switch specifies whether to return only auxiliary audit log mailboxes in the results. You don't need to specify a value with this switch.

Audit log mailboxes are arbitration mailboxes that are used to store audit log settings.

To return other types of arbitration mailboxes, don't use this switch. Instead, use the Arbitration switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-Credential

This parameter is available only in on-premises Exchange.

The Credential parameter specifies the username and password that's used to run this command. Typically, you use this parameter in scripts or when you need to provide different credentials that have the required permissions.

A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.

Type:PSCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Database

This parameter is available only in on-premises Exchange.

The Database parameter filters the results by mailbox database. When you use this parameter, only mailboxes on the specified database are included in the results. You can any value that uniquely identifies the database. For example:

  • Name
  • Distinguished name (DN)
  • GUID

You can't use this parameter with the Anr, Identity, or Server parameters.

Type:DatabaseIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Filter

The Filter parameter uses OPATH syntax to filter the results by the specified properties and values. The search criteria uses the syntax "Property -ComparisonOperator 'Value'".

  • Enclose the whole OPATH filter in double quotation marks " ". If the filter contains system values (for example, $true, $false, or $null), use single quotation marks ' ' instead. Although this parameter is a string (not a system block), you can also use braces { }, but only if the filter doesn't contain variables.
  • Property is a filterable property. For more information about the filterable properties, see Filterable properties for the Filter parameter.
  • ComparisonOperator is an OPATH comparison operator (for example -eq for equals and -like for string comparison). For more information about comparison operators, see about_Comparison_Operators.
  • Value is the property value to search for. Enclose text values and variables in single quotation marks ('Value' or '$Variable'). If a variable value contains single quotation marks, you need to identify (escape) the single quotation marks to expand the variable correctly. For example, instead of '$User', use '$($User -Replace "'","''")'. Don't enclose integers or system values in quotation marks (for example, use 500, $true, $false, or $null instead).

You can chain multiple search criteria together using the logical operators -and and -or. For example, "Criteria1 -and Criteria2" or "(Criteria1 -and Criteria2) -or Criteria3".

For detailed information about OPATH filters in Exchange, see Additional OPATH syntax information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-GroupMailbox

The GroupMailbox switch specifies whether to return only Microsoft 365 Groups in the results. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-Identity

The Identity parameter specifies the mailbox that you want to view. You can use any value that uniquely identifies the mailbox. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

You can't use this parameter with the Anr, Database, MailboxPlan or Server parameters.

Type:MailboxIdParameter
Position:1
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-IgnoreDefaultScope

This parameter is available only in on-premises Exchange.

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.

This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:

  • You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
  • You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InactiveMailboxOnly

This parameter is available only in the cloud-based service.

The InactiveMailboxOnly switch specifies whether to return only inactive mailboxes in the results. You don't need to specify a value with this switch.

An inactive mailbox is a mailbox that's placed on Litigation Hold or In-Place Hold before it's soft-deleted. The contents of an inactive mailbox are preserved until the hold is removed.

To include active and inactive mailboxes in the results, don't use this switch. Instead, use the IncludeInactiveMailbox switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames

This parameter is available only in the cloud-based service.

{{ Fill IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames Description }}

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames

This parameter is available only in the cloud-based service.

{{ Fill IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames Description }}

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-IncludeAcceptMessagesOnlyFromWithDisplayNames

This parameter is available only in the cloud-based service.

{{ Fill IncludeAcceptMessagesOnlyFromWithDisplayNames Description }}

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-IncludeEmailAddressDisplayNames

This parameter is available only in the cloud-based service.

{{ Fill IncludeEmailAddressDisplayNames Description }}

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-IncludeInactiveMailbox

This parameter is available only in the cloud-based service.

The IncludeInactiveMailbox switch specifies whether to include inactive mailboxes in the results. You don't need to specify a value with this switch.

An inactive mailbox is a mailbox that's placed on Litigation Hold or In-Place Hold before it's soft-deleted. The contents of an inactive mailbox are preserved until the hold is removed.

To return only inactive mailboxes in the results, don't use this switch. Instead, use the InactiveMailboxOnly switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-MailboxPlan

This parameter is available only in the cloud-based service.

The MailboxPlan parameter filters the results by mailbox plan. When you use this parameter, only mailboxes that are assigned the specified mailbox plan are returned in the results. You can use any value that uniquely identifies the mailbox plan. For example:

  • Name
  • Alias
  • Display name
  • Distinguished name (DN)
  • GUID

A mailbox plan specifies the permissions and features available to a mailbox user in cloud-based organizations. You can see the available mailbox plans by using the Get-MailboxPlan cmdlet.

You can't use this parameter with the Anr or Identity parameters.

Type:MailboxPlanIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Online

-Migration

The Migration switch specifies whether to return only migration mailboxes in the results. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-Monitoring

This parameter is available only in on-premises Exchange.

The Monitoring switch specifies whether to return only monitoring mailboxes in the results. You don't need to specify a value with this switch.

Monitoring mailboxes are associated with managed availability and the Exchange Health Manager service, and have a RecipientTypeDetails property value of MonitoringMailbox.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-OrganizationalUnit

The OrganizationalUnit parameter filters the results based on the object's location in Active Directory. Only objects that exist in the specified location are returned. Valid input for this parameter is an organizational unit (OU) or domain that's returned by the Get-OrganizationalUnit cmdlet. You can use any value that uniquely identifies the OU or domain. For example:

  • Name
  • Canonical name
  • Distinguished name (DN)
  • GUID
Type:OrganizationalUnitIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PublicFolder

The PublicFolder switch specifies whether to return only public folder mailboxes in the results. You don't need to specify a value with this switch.

Public folder mailboxes are specially designed mailboxes that store the hierarchy and content of public folders.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ReadFromDomainController

This parameter is available only in on-premises Exchange.

The ReadFromDomainController switch specifies that information should be read from a domain controller in the user's domain. You don't need to specify a value with this switch.

The command: Set-AdServerSettings -ViewEntireForest $true to include all objects in the forest requires the ReadFromDomainController switch. Otherwise, the command might use a global catalog that contains outdated information. Also, you might need to run multiple iterations of the command with the ReadFromDomainController switch to get the information.

By default, the recipient scope is set to the domain that hosts your Exchange servers.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RecipientTypeDetails

The RecipientTypeDetails parameter filters the results by the specified mailbox subtype. Valid values are:

  • DiscoveryMailbox
  • EquipmentMailbox
  • GroupMailbox (Exchange 2013 or later and cloud)
  • LegacyMailbox
  • LinkedMailbox
  • LinkedRoomMailbox (Exchange 2013 or later and cloud)
  • RoomMailbox
  • SchedulingMailbox (Exchange 2016 or later and cloud)
  • SharedMailbox
  • TeamMailbox (Exchange 2013 or later and cloud)
  • UserMailbox

You can specify multiple values separated by commas.

Type:RecipientTypeDetails[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RemoteArchive

This parameter is available only in on-premises Exchange.

The RemoteArchive switch specifies whether to return only remote archive mailboxes in the results. You don't need to specify a value with this switch.

Remote archive mailboxes are archive mailboxes in the cloud-based service that are associated with mailbox users in on-premises Exchange organizations.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ResultSize

The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Server

This parameter is available only in on-premises Exchange.

The Server parameter filters the results by Exchange server. When you use this parameter, only mailboxes on the specified Exchange server are included in the results.

You can use any value that uniquely identifies the server. For example:

  • Name
  • FQDN
  • Distinguished name (DN)
  • Exchange Legacy DN

You can't use this parameter with the Anr, Database, or Identity parameters.

The ServerName and ServerLegacyDN properties for a mailbox may not be updated immediately after a mailbox move within a database availability group (DAG). To get the most up-to-date values for these mailbox properties, run the command Get-Mailbox <Identity> | Get-MailboxStatistics | Format-List Name,ServerName,ServerLegacyDN.

Note: The result from this parameter could be a legacy value before migration. For better results, use the Database parameter instead.

Type:ServerIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ServiceSafetyConfiguration

This parameter is available only in the cloud-based service.

{{ Fill ServiceSafetyConfiguration Description }}

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-SoftDeletedMailbox

This parameter is available only in the cloud-based service.

The SoftDeletedMailbox switch specifies whether to return only soft-deleted mailboxes in the results. You don't need to specify a value with this switch.

Soft-deleted mailboxes are deleted mailboxes that are still recoverable.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-SortBy

The SortBy parameter specifies the property to sort the results by. You can sort by only one property at a time. The results are sorted in ascending order.

If the default view doesn't include the property you're sorting by, you can append the command with | Format-Table -Auto Property1,Property2,...PropertyX. to create a new view that contains all of the properties that you want to see. Wildcards (*) in the property names are supported.

You can sort by the following properties:

  • Name
  • DisplayName
  • Alias
  • Office
  • ServerLegacyDN
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SupervisoryReviewPolicy

This parameter is available only in on-premises Exchange.

This parameter is reserved for internal Microsoft use.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.