Set-MailPublicFolder

 

Applies to: Exchange Online, Exchange Server 2016

This cmdlet is available in on-premises Exchange Server 2016 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-MailPublicFolder cmdlet to configure the mail-related settings of mail-enabled public folders. If you want to configure basic settings that aren't mail related, use the Set-PublicFolder cmdlet.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Set-MailPublicFolder -Identity <MailPublicFolderIdParameter> [-AcceptMessagesOnlyFrom <MultiValuedProperty>] [-AcceptMessagesOnlyFromDLMembers <MultiValuedProperty>] [-AcceptMessagesOnlyFromSendersOrMembers <MultiValuedProperty>] [-Alias <String>] [-BypassModerationFromSendersOrMembers <MultiValuedProperty>] [-Confirm [<SwitchParameter>]] [-Contacts <RecipientIdParameter[]>] [-CustomAttribute1 <String>] [-CustomAttribute10 <String>] [-CustomAttribute11 <String>] [-CustomAttribute12 <String>] [-CustomAttribute13 <String>] [-CustomAttribute14 <String>] [-CustomAttribute15 <String>] [-CustomAttribute2 <String>] [-CustomAttribute3 <String>] [-CustomAttribute4 <String>] [-CustomAttribute5 <String>] [-CustomAttribute6 <String>] [-CustomAttribute7 <String>] [-CustomAttribute8 <String>] [-CustomAttribute9 <String>] [-DeliverToMailboxAndForward <$true | $false>] [-DisplayName <String>] [-DomainController <Fqdn>] [-EmailAddresses <ProxyAddressCollection>] [-EmailAddressPolicyEnabled <$true | $false>] [-EntryId <String>] [-ExtensionCustomAttribute1 <MultiValuedProperty>] [-ExtensionCustomAttribute2 <MultiValuedProperty>] [-ExtensionCustomAttribute3 <MultiValuedProperty>] [-ExtensionCustomAttribute4 <MultiValuedProperty>] [-ExtensionCustomAttribute5 <MultiValuedProperty>] [-ExternalDirectoryObjectId <Guid>] [-ExternalEmailAddress <ProxyAddress>] [-ForwardingAddress <RecipientIdParameter>] [-GrantSendOnBehalfTo <MultiValuedProperty>] [-HiddenFromAddressListsEnabled <$true | $false>] [-IgnoreDefaultScope <SwitchParameter>] [-IgnoreMissingFolderLink <$true | $false>] [-MailTip <String>] [-MailTipTranslations <MultiValuedProperty>] [-MaxReceiveSize <Unlimited>] [-MaxSendSize <Unlimited>] [-ModeratedBy <MultiValuedProperty>] [-ModerationEnabled <$true | $false>] [-Name <String>] [-OnPremisesObjectId <Guid>] [-PhoneticDisplayName <String>] [-PrimarySmtpAddress <SmtpAddress>] [-RejectMessagesFrom <MultiValuedProperty>] [-RejectMessagesFromDLMembers <MultiValuedProperty>] [-RejectMessagesFromSendersOrMembers <MultiValuedProperty>] [-RequireSenderAuthenticationEnabled <$true | $false>] [-SendModerationNotifications <Never | Internal | Always>] [-SimpleDisplayName <String>] [-WhatIf [<SwitchParameter>]] [-WindowsEmailAddress <SmtpAddress>]

This example sets the primary SMTP address of the mail-enabled public folder MyPublicFolder@contoso.com to MyPublicFolder@fabrikam.com.

Set-MailPublicFolder -Identity MyPublicFolder@contoso.com -PrimarySmtpAddress MyPublicFolder@fabrikam.com

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Public folders, mail-enabled" section in the Sharing and collaboration permissions topic.

 

Parameter Required Type Description

Identity

Required

Microsoft.Exchange.Configuration.Tasks.MailPublicFolderIdParameter

The Identity parameter specifies the GUID or public folder name that represents a specific public folder. You can also include the path using the format \TopLevelPublicFolder\PublicFolder.

You can omit the parameter label so that only the public folder name or GUID is supplied.

AcceptMessagesOnlyFrom

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The AcceptMessagesOnlyFrom parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are individual senders in your organization (mailboxes, mail users, and mail contacts). You can use any value that uniquely identifies the sender. For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: <sender1>,<senter2>.... If the values contain spaces or otherwise require quotation marks, use the following syntax: "<sender1>","<sender2>"....

To add or remove senders without affecting other existing entries, use the following syntax: @{Add="<sender1>","<sender2>"...; Remove="<sender1>","<sender2>"...}.

The senders you specify for this parameter are automatically copied to the AcceptMessagesOnlyFromSendersOrMembers property. Therefore, you can't use the AcceptMessagesOnlyFrom and AcceptMessagesOnlyFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

AcceptMessagesOnlyFromDLMembers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The AcceptMessagesOnlyFromDLMembers parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are groups in your organization (distribution groups, mail-enabled security groups, and dynamic distribution groups). Specifying a group means all members of the group are allowed to send messages to this recipient. You can use any value that uniquely identifies the group. For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

You can enter multiple groups separated by commas. To overwrite any existing entries, use the following syntax: <group1>,<group2>.... If the values contain spaces or otherwise require quotation marks, use the following syntax: "<group1>","<group2>"....

To add or remove groups without affecting other existing entries, use the following syntax: @{Add="<group1>","<group2>"...; Remove="<group1>","<group2>"...}.

The groups you specify for this parameter are automatically copied to the AcceptMessagesOnlyFromSendersOrMembers property. Therefore, you can't use the AcceptMessagesOnlyFromDLMembers and AcceptMessagesOnlyFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all groups.

AcceptMessagesOnlyFromSendersOrMembers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The AcceptMessagesOnlyFromSendersOrMembers parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are individual senders and groups in your organization. Individual senders are mailboxes, mail users, and mail contacts. Groups are distribution groups, mail-enabled security groups, and dynamic distribution groups. Specifying a group means all members of the group are allowed to send messages to this recipient.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: <sender1>,<senter2>.... If the values contain spaces or otherwise require quotation marks, use the following syntax: "<sender1>","<sender2>"....

To add or remove individual senders or groups without affecting other existing entries, use the AcceptMessagesOnlyFrom and AcceptMessageOnlyFromDLMembers parameters.

The individual senders and groups you specify for this parameter are automatically copied to the AcceptMessagesOnlyFrom and AcceptMessagesOnlyFromDLMembers properties, respectively. Therefore, you can't use the AcceptMessagesOnlyFromSendersOrMembers parameter and the AcceptMessagesOnlyFrom or AcceptMessagesOnlyFromDLMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Alias

Optional

System.String

The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value.

The value of Alias can contain letters, numbers and the characters !, #, $, %, &, ', *, +, -, /, =, ?, ^, _, `, {, |, } and ~. Periods (.) are allowed, but each period must be surrounded by other valid characters (for example, help.desk). Unicode characters from U+00A1 to U+00FF are also allowed. The maximum length of the Alias value is 64 characters.

When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (<alias>@<domain>). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.

If you don't use the Alias parameter when you create a recipient, the value of a different required parameter is used for the Alias property value:

  • Recipients with user accounts (for example, user mailboxes, and mail users)   The left side of the MicrosoftOnlineServicesID or UserPrincipalName parameter is used. For example, helpdesk@contoso.com results in the Alias property value helpdesk.

  • Recipeints without user accounts (for example, room mailboxes, mail contacts, and distribution groups)   The value of the Name parameter is used. Spaces are removed and unsupported characters are converted to question marks (?).

If you modify the Alias value of an existing recipient, the primary email address is automatically updated only in on-premises environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is True for the recipient).

noteNote:
The Alias parameter never generates or updates the primary email address of a mail contact or a mail user.

BypassModerationFromSendersOrMembers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The BypassModerationFromSendersOrMembers parameter specifies who is allowed to send messages to this moderated recipient without approval from a moderator. Valid values for this parameter are individual senders and groups in your organization. Specifying a group means all members of the group are allowed to send messages to this recipient without approval from a moderator.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

To enter multiple senders and overwrite any existing entries, use the following syntax: <sender1>,<sender2>.... If the values contain spaces or otherwise require quotation marks, use the following syntax: "<sender1>","<sender2>"....

To add or remove one or more senders without affecting any existing entries, use the following syntax: @{Add="<sender1>","<sender2>"...; Remove="<sender3>","<sender4>"...}.

This parameter is meaningful only when moderation is enabled for the recipient. By default, this parameter is blank ($null), which means messages from all senders other than the designated moderators are moderated. When a moderator sends a message to this recipient, the message is isn't moderated. In other words, you don't need to use this parameter to include the moderators.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Contacts

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter[]

The Contacts parameter specifies the contacts for the public folder. Contacts are persons about whom you can save several types of information, such as addresses, telephone numbers, and web page URLs.

CustomAttribute1

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute10

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute11

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute12

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute13

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute14

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute15

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute2

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute3

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute4

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute5

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute6

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute7

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute8

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

CustomAttribute9

Optional

System.String

The CustomAttribute1 to CustomAttribute15 parameters specify custom attributes. You can use these attributes to store additional information.

DeliverToMailboxAndForward

Optional

System.Boolean

The DeliverToMailboxAndForward parameter specifies the message delivery behavior when a forwarding address is specified by the ForwardingAddress or ForwardingSmtpAddress parameters. Valid values are:

  • $true   Messages are delivered to this public folder and forwarded to the specified recipient or email address.

  • $false   If a forwarding recipient or email address is configured, messages are delivered only to the specified recipient or email address, and messages aren't delivered to this public folder. If no forwarding recipient or email address is configured, messages are delivered only to this public folder.

The default value is $false. The value of this parameter is meaningful only if you configure a forwarding recipient or email address.

DisplayName

Optional

System.String

The DisplayName parameter specifies the display name of the Public Folder Proxy object.. The display name is visible in the Exchange admin center, address lists, and Outlook. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

This parameter is available only in on-premises Exchange 2016.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

EmailAddresses

Optional

Microsoft.Exchange.Data.ProxyAddressCollection

The EmailAddresses parameter specifies all the email addresses (proxy addresses) for the recipient, including the primary SMTP address. In on-premises Exchange organizations, the primary SMTP address and other proxy addresses are typically set by email address policies. However, you can use this parameter to configure other proxy addresses for the recipient. For more information, see Email address policies.

Valid syntax for this parameter is [<Type>]:<emailaddress1>,[<Type>]:<emailaddress2>.... The optional <Type> value specifies the type of email address. Some examples of valid values include:

  • SMTP   The primary SMTP address. You can use this value only once in a command.

  • smtp   Other SMTP email addresses.

  • X400   X.400 addresses in on-premises Exchange.

  • X500   X.500 addresses in on-premises Exchange.

If you don't include a <Type> value for an email address, the value smtp is assumed. Note that Exchange doesn't validate the syntax of custom address types (including X.400 addresses). Therefore, you need to verify that any custom addresses are formatted correctly.

To specify the primary SMTP email address, you can use any of the following methods:

  • Use the <Type> value SMTP on the address.

  • The first email address when you don't use any <Type> values, or when you use multiple <Type> values of smtp.

  • If it's available, use the PrimarySmtpAddress parameter instead. You can't use the EmailAddresses parameter and the PrimarySmtpAddress parameter in the same command.

To replace all existing proxy email addresses with the values you specify, use the following syntax: "[<Type>]:<emailaddress1>","[<Type>]:<emailaddress2>"....

To add or remove specify proxy addresses without affecting other existing values, use the following syntax: @{Add="[<Type>]:<emailaddress1>","[<Type>]:<emailaddress2>"...; Remove="[<Type>]:<emailaddress2>","[<Type>]:<emailaddress2>"...}.

EmailAddressPolicyEnabled

Optional

System.Boolean

The EmailAddressPolicyEnabled parameter specifies whether to apply email address policies to this recipient. Valid values are:

  • $true   All applicable email address policies are applied to this recipient. This is the default value.

  • $false   No email address policies are applied to this recipient.

EntryId

Optional

System.String

The EntryId parameter specifies the EntryID value for the public folder. You use this parameter to correct an existing EntryID that points to a folder that can't be found.

ExtensionCustomAttribute1

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtensionCustomAttribute1-5 parameters specify custom attributes that store additional information. You can specify multiple values for these parameters as a comma delimited list. Each ExtensionCustomAttribute parameter can hold up to 1,300 values.

For more information about custom attributes, see Custom attributes.

For more information about using multivalued properties, see Modifying multivalued properties.

ExtensionCustomAttribute2

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtensionCustomAttribute1-5 parameters specify custom attributes that store additional information. You can specify multiple values for these parameters as a comma delimited list. Each ExtensionCustomAttribute parameter can hold up to 1,300 values.

For more information about custom attributes, see Custom attributes.

For more information about using multivalued properties, see Modifying multivalued properties.

ExtensionCustomAttribute3

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtensionCustomAttribute1-5 parameters specify custom attributes that store additional information. You can specify multiple values for these parameters as a comma delimited list. Each ExtensionCustomAttribute parameter can hold up to 1,300 values.

For more information about custom attributes, see Custom attributes.

For more information about using multivalued properties, see Modifying multivalued properties.

ExtensionCustomAttribute4

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtensionCustomAttribute1-5 parameters specify custom attributes that store additional information. You can specify multiple values for these parameters as a comma delimited list. Each ExtensionCustomAttribute parameter can hold up to 1,300 values.

For more information about custom attributes, see Custom attributes.

For more information about using multivalued properties, see Modifying multivalued properties.

ExtensionCustomAttribute5

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtensionCustomAttribute1-5 parameters specify custom attributes that store additional information. You can specify multiple values for these parameters as a comma delimited list. Each ExtensionCustomAttribute parameter can hold up to 1,300 values.

For more information about custom attributes, see Custom attributes.

For more information about using multivalued properties, see Modifying multivalued properties.

ExternalDirectoryObjectId

Optional

System.Guid

This parameter is reserved for internal Microsoft use.

ExternalEmailAddress

Optional

Microsoft.Exchange.Data.ProxyAddress

The ExternalEmailAddress parameter specifies an email address outside the organization.

ForwardingAddress

Optional

Microsoft.Exchange.Configuration.Tasks.RecipientIdParameter

The ForwardingAddress parameter specifies a forwarding address for messages that are sent to this public folder. A valid value for this parameter is a recipient in your organization. You can use any value that uniquely identifies the recipient.

For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

How messages are delivered and forwarded is controlled by the DeliverToMailboxAndForward parameter.

  • DeliverToMailboxAndForward is $true   Messages are delivered to this public folder and forwarded to the specified recipient.

  • DeliverToMailboxAndForward is $false   Messages are only forwarded to the specified recipient. Messages aren't delivered to this public folder.

The default value is blank ($null), which means no forwarding recipient is configured.

GrantSendOnBehalfTo

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The GrantSendOnBehalfTo parameter specifies who can send on behalf of this public folder. Although messages sent on behalf of the mail user clearly show the sender in the From field (<Sender> on behalf of <Public folder>), replies to these messages are delivered to the public folder, not the sender.

The sender you specify for this parameter must a mailbox, mail user or mail-enabled security group (a mail-enabled security principal that can have permissions assigned). You can use any value that uniquely identifies the sender.

For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • <domain name>\<account name>

  • Email address

  • GUID

  • LegacyExchangeDN

  • SamAccountName

  • User ID or user principal name (UPN)

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

By default, this parameter is blank, which means no one else has permission to send on behalf of this public folder.

HiddenFromAddressListsEnabled

Optional

System.Boolean

The HiddenFromAddressListsEnabled parameter specifies whether this recipient is visible in address lists. Valid values are:

  • $true   The recipient isn't visible in address lists.

  • $false   The recipient is visible in address lists. This is the default value.

IgnoreDefaultScope

Optional

System.Management.Automation.SwitchParameter

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange Management Shell session, and to use the entire forest as the scope. This allows the command to access Active Directory objects that aren't currently available in the default scope.

Using the IgnoreDefaultScope switch introduces the following restrictions:

  • You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.

  • You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.

IgnoreMissingFolderLink

Optional

System.Boolean

PARAMVALUE: $true | $false

MailTip

Optional

System.String

The MailTip parameter specifies the custom MailTip text for this recipient. The MailTip is shown to senders when they start drafting an email message to this recipient. If the value contains spaces, enclose the value in quotation marks (").

When you add a MailTip to a recipient, two things happen:

  • HTML tags are automatically added to the text. For example, if you enter the text: "This mailbox is not monitored", the MailTip automatically becomes: <html><body>This mailbox is not monitored</body></html>. Additional HTML tags aren't supported, and the length of the MailTip can't exceed 175 displayed characters.

  • The text is automatically added to the MailTipTranslations property of the recipient as the default value: default:<MailTip text>. If you modify the MailTip text, the default value is automatically updated in the MailTipTranslations property, and vice-versa.

MailTipTranslations

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The MailTipTranslations parameter specifies additional languages for the custom MailTip text that's defined by the MailTip parameter. HTML tags are automatically added to the MailTip translation, additional HTML tags aren't supported, and the length of the MailTip translation can't exceed 175 displayed characters.

To add or remove MailTip translations without affecting the default MailTip or other MailTip translations, use the following syntax:

@{Add="<culture 1>:<localized text 1>","<culture 2>:<localized text 2>"...; Remove="<culture 3>:<localized text 3>","<culture 4>:<localized text 4>"...}

<culture> is a valid ISO 639 two-letter culture code that's associated with the language.

For example, suppose this recipient currently has the MailTip text: "This mailbox is not monitored." To add the Spanish translation, use the following value for this parameter: @{Add="ES:Esta caja no se supervisa."}.

MaxReceiveSize

Optional

Microsoft.Exchange.Data.Unlimited

The MaxReceiveSize parameter specifies the maximum size of a message that can be sent to the public folder. Messages larger than the maximum size are rejected.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

A valid value is a number up to 1.999999 gigabytes (2147483647 bytes) or the value unlimited. The default value is unlimited.

The value unlimited indicates the maximum receive size for the public folder is controlled elsewhere (for example, organization, server, or connector limits).

noteNote:
For any message size limit, you need to set a value that's larger than the actual size you want enforced. This accounts for the Base64 encoding of attachments and other binary data. Base64 encoding increases the size of the message by approximately 33%, so the value you specify should be approximately 33% larger than the actual message size you want enforced. For example, if you specify a maximum message size value of 64 MB, you can expect a realistic maximum message size of approximately 48 MB.

MaxSendSize

Optional

Microsoft.Exchange.Data.Unlimited

The MaxSendSize parameter specifies the maximum size of a message that can be sent by the public folder.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

A valid value is a number up to 1.999999 gigabytes (2147483647 bytes) or the value unlimited. The default value is unlimited.

The value unlimited indicates the maximum send size for the public folder is controlled elsewhere (for example, organization, server, or connector limits).

noteNote:
For any message size limit, you need to set a value that's larger than the actual size you want enforced. This accounts for the Base64 encoding of attachments and other binary data. Base64 encoding increases the size of the message by approximately 33%, so the value you specify should be approximately 33% larger than the actual message size you want enforced. For example, if you specify a maximum message size value of 64 MB, you can expect a realistic maximum message size of approximately 48 MB.

ModeratedBy

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ModeratedBy parameter specifies one or more moderators for this recipient. A moderator approves messages sent to the recipient before the messages are delivered. A moderator must be a mailbox, mail user, or mail contact in your organization. You can use any value that uniquely identifies the moderator.

For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

You need to use this parameter to specify at least one moderator when you set the ModerationEnabled parameter to the value $true.

ModerationEnabled

Optional

System.Boolean

The ModerationEnabled parameter specifies whether moderation is enabled for this recipient. Valid value are:

  • $true   Moderation is enabled for this recipient. Messages sent to this recipient must be approved by a moderator before the messages are delivered.

  • $false   Moderation is disabled for this recipient. Messages sent to this recipient are delivered without the approval of a moderator. This is the default value.

You use the ModeratedBy parameter to specify the moderators.

Name

Optional

System.String

The Name parameter specifies the unique name of the public folder. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").

OnPremisesObjectId

Optional

System.Guid

PARAMVALUE: Guid

PhoneticDisplayName

Optional

System.String

The PhoneticDisplayName parameter specifies an alternate spelling of the user's name that's used for text to speech in Unified Messaging (UM) environments. Typically, you use this parameter when the pronunciation and spelling of the user's name don't match. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

PrimarySmtpAddress

Optional

Microsoft.Exchange.Data.SmtpAddress

The PrimarySmtpAddress parameter specifies the primary return email address that's used for the recipient. If it's available on this cmdlet, you can't use the EmailAddresses and PrimarySmtpAddress parameters in the same command.

RejectMessagesFrom

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The RejectMessagesFrom parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are individual senders in your organization (mailboxes, mail users, and mail contacts). You can use any value that uniquely identifies the sender. For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: <sender1>,<senter2>.... If the values contain spaces or otherwise require quotation marks, use the following syntax: "<sender1>","<sender2>"....

To add or remove senders without affecting other existing entries, use the following syntax: @{Add="<sender1>","<sender2>"...; Remove="<sender1>","<sender2>"...}.

The senders you specify for this parameter are automatically copied to the RejectMessagesFromSendersOrMembers property. Therefore, you can't use the RejectMessagesFrom and RejectMessagesFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

RejectMessagesFromDLMembers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The RejectMessagesFromDLMembers parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are groups in your organization (distribution groups, mail-enabled security groups, and dynamic distribution groups). Specifying a group means all members of the group aren't allowed to send messages to this recipient. You can use any value that uniquely identifies the group. For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

You can enter multiple groups separated by commas. To overwrite any existing entries, use the following syntax: <group1>,<group2>.... If the values contain spaces or otherwise require quotation marks, use the following syntax: "<group1>","<group2>"....

To add or remove groups without affecting other existing entries, use the following syntax: @{Add="<group1>","<group2>"...; Remove="<group1>","<group2>"...}.

The groups you specify for this parameter are automatically copied to the RejectMessagesFromSendersOrMembers property. Therefore, you can't use the RejectMessagesFromDLMembers and RejectMessagesFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all groups.

RejectMessagesFromSendersOrMembers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The RejectMessagesFromSendersOrMembers parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are individual senders and groups in your organization. Individual senders are mailboxes, mail users, and mail contacts. Groups are distribution groups, mail-enabled security groups, and dynamic distribution groups. Specifying a group means all members of the group aren't allowed to send messages to this recipient.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

  • Name

  • Display name

  • Alias

  • Distinguished name (DN)

  • Canonical DN

  • Email address

  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: <sender1>,<senter2>.... If the values contain spaces or otherwise require quotation marks, use the following syntax: "<sender1>","<sender2>"....

To add or remove individual senders or groups without affecting other existing entries, use the RejectMessagesFrom and RejectMessagesFromDLMembers parameters.

The individual senders and groups you specify for this parameter are automatically copied to the RejectMessagesFrom and RejectMessagesFromDLMembers properties, respectively. Therefore, you can't use the RejectMessagesFromSendersOrMembers parameter and the RejectMessagesFrom or RejectMessagesFromDLMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

RequireSenderAuthenticationEnabled

Optional

System.Boolean

The RequireSenderAuthenticationEnabled parameter specifies whether to accept messages only from authenticated (internal) senders. Valid values are:

  • $true   Messages are accepted only from authenticated (internal) senders. Messages from unauthenticated (external) senders are rejected.

  • $false   Messages are accepted from authenticated (internal) and unauthenticated (external) senders.

SendModerationNotifications

Optional

Microsoft.Exchange.Data.Directory.Recipient.TransportModerationNotificationFlags

The SendModerationNotifications parameter specifies whether moderation status notification messages are sent to senders when they send a message to this moderated recipient. Valid values are:

  • Always   Moderation status notifications are sent to all internal and external senders. This is the default value.

  • Internal   Moderation status notifications are sent to all internal senders, but not to external senders.

  • Never   Moderation status notifications are disabled.

Note that senders are always notified if their message is rejected by a moderator, regardless of the value of this parameter.

SimpleDisplayName

Optional

System.String

UNRESOLVED_TOKEN_VAL(PD_SimpleDisplayName)

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

WindowsEmailAddress

Optional

Microsoft.Exchange.Data.SmtpAddress

The WindowsEmailAddress parameter specifies an email address in the format EmailAddress@contoso.com.

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

 
Show: