Set-MailPublicFolder

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-MailPublicFolder cmdlet to configure the mail-related settings of mail-enabled public folders. If you want to configure basic settings that aren't mail-related, use the Set-PublicFolder cmdlet.

NOTE: The settings that you configure on a public folder mailbox might interfere with the existing settings on a public folder within in the mailbox.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-MailPublicFolder
   [-Identity] <MailPublicFolderIdParameter>
   [-AcceptMessagesOnlyFrom <MultiValuedProperty>]
   [-AcceptMessagesOnlyFromDLMembers <MultiValuedProperty>]
   [-AcceptMessagesOnlyFromSendersOrMembers <MultiValuedProperty>]
   [-Alias <String>]
   [-ArbitrationMailbox <MailboxIdParameter>]
   [-BypassModerationFromSendersOrMembers <MultiValuedProperty>]
   [-Confirm]
   [-Contacts <RecipientIdParameter[]>]
   [-CreateDTMFMap <Boolean>]
   [-CustomAttribute1 <String>]
   [-CustomAttribute10 <String>]
   [-CustomAttribute11 <String>]
   [-CustomAttribute12 <String>]
   [-CustomAttribute13 <String>]
   [-CustomAttribute14 <String>]
   [-CustomAttribute15 <String>]
   [-CustomAttribute2 <String>]
   [-CustomAttribute3 <String>]
   [-CustomAttribute4 <String>]
   [-CustomAttribute5 <String>]
   [-CustomAttribute6 <String>]
   [-CustomAttribute7 <String>]
   [-CustomAttribute8 <String>]
   [-CustomAttribute9 <String>]
   [-DeliverToMailboxAndForward <Boolean>]
   [-DisplayName <String>]
   [-DomainController <Fqdn>]
   [-EmailAddresses <ProxyAddressCollection>]
   [-EmailAddressPolicyEnabled <Boolean>]
   [-EntryId <String>]
   [-ExtensionCustomAttribute1 <MultiValuedProperty>]
   [-ExtensionCustomAttribute2 <MultiValuedProperty>]
   [-ExtensionCustomAttribute3 <MultiValuedProperty>]
   [-ExtensionCustomAttribute4 <MultiValuedProperty>]
   [-ExtensionCustomAttribute5 <MultiValuedProperty>]
   [-ExternalEmailAddress <ProxyAddress>]
   [-ForwardingAddress <RecipientIdParameter>]
   [-GrantSendOnBehalfTo <MultiValuedProperty>]
   [-HiddenFromAddressListsEnabled <Boolean>]
   [-IgnoreDefaultScope]
   [-IgnoreMissingFolderLink <Boolean>]
   [-MailTip <String>]
   [-MailTipTranslations <MultiValuedProperty>]
   [-MaxReceiveSize <Unlimited>]
   [-MaxSendSize <Unlimited>]
   [-ModeratedBy <MultiValuedProperty>]
   [-ModerationEnabled <Boolean>]
   [-Name <String>]
   [-OnPremisesObjectId <Guid>]
   [-PhoneticDisplayName <String>]
   [-PrimarySmtpAddress <SmtpAddress>]
   [-PublicFolderType <PublicFolderType>]
   [-RejectMessagesFrom <MultiValuedProperty>]
   [-RejectMessagesFromDLMembers <MultiValuedProperty>]
   [-RejectMessagesFromSendersOrMembers <MultiValuedProperty>]
   [-RequireSenderAuthenticationEnabled <Boolean>]
   [-SendModerationNotifications <TransportModerationNotificationFlags>]
   [-Server <ServerIdParameter>]
   [-SimpleDisplayName <String>]
   [-UMDtmfMap <MultiValuedProperty>]
   [-WhatIf]
   [-WindowsEmailAddress <SmtpAddress>]
   [<CommonParameters>]

Description

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-MailPublicFolder -Identity MyPublicFolder@contoso.onmicrosoft.com -EmailAddresses @{add="MyPublicFolder@contoso.com","MyPublicFolder@fabrikam.com"}

This example adds the specified secondary email addresses to the mail enabled public folder MyPublicFolder@contoso.onmicrosoft.com.

Verify the accepted domains are present in the organization before adding email addresses in those domains.

Example 2

Set-MailPublicFolder -Identity MyPublicFolder -PrimarySmtpAddress MyPublicFolder@contoso.com -EmailAddressPolicyEnabled $false

This example sets the primary email address of the specified mail-enabled public folder to MyPublicFolder@contoso.com

Example 3

Set-MailPublicFolder -Identity MyPublicFolder -EmailAddresses @{remove="MyPublicFolder@fabrikam.com"}

This example removes the secondary email address MyPublicFolder@fabrikam.com from the specified mail-enabled public folder.

Parameters

-AcceptMessagesOnlyFrom

The AcceptMessagesOnlyFrom parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are individual senders in your organization (mailboxes, mail users, and mail contacts). You can use any value that uniquely identifies the sender. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: Sender1,Sender2,...SenderN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Sender1","Sender2",..."SenderN".

To add or remove senders without affecting other existing entries, use the following syntax: @{Add="Sender1","Sender2"...; Remove="Sender3","Sender4"...}.

The senders you specify for this parameter are automatically copied to the AcceptMessagesOnlyFromSendersOrMembers property. Therefore, you can't use the AcceptMessagesOnlyFrom and AcceptMessagesOnlyFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AcceptMessagesOnlyFromDLMembers

The AcceptMessagesOnlyFromDLMembers parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are groups in your organization (distribution groups, mail-enabled security groups, and dynamic distribution groups). Specifying a group means all members of the group are allowed to send messages to this recipient. You can use any value that uniquely identifies the group. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple groups separated by commas. To overwrite any existing entries, use the following syntax: Group1,Group2,...GroupN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Group1","Group2",..."GroupN".

To add or remove groups without affecting other existing entries, use the following syntax: @{Add="Group1","Group2"...; Remove="Group3","Group4"...}.

The groups you specify for this parameter are automatically copied to the AcceptMessagesOnlyFromSendersOrMembers property. Therefore, you can't use the AcceptMessagesOnlyFromDLMembers and AcceptMessagesOnlyFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all groups.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AcceptMessagesOnlyFromSendersOrMembers

The AcceptMessagesOnlyFromSendersOrMembers parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are individual senders and groups in your organization. Individual senders are mailboxes, mail users, and mail contacts. Groups are distribution groups, mail-enabled security groups, and dynamic distribution groups. Specifying a group means all members of the group are allowed to send messages to this recipient.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: Sender1,Sender2,...SenderN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Sender1","Sender2",..."SenderN".

To add or remove individual senders or groups without affecting other existing entries, use the AcceptMessagesOnlyFrom and AcceptMessageOnlyFromDLMembers parameters.

The individual senders and groups you specify for this parameter are automatically copied to the AcceptMessagesOnlyFrom and AcceptMessagesOnlyFromDLMembers properties, respectively. Therefore, you can't use the AcceptMessagesOnlyFromSendersOrMembers parameter and the AcceptMessagesOnlyFrom or AcceptMessagesOnlyFromDLMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Alias

The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value. The maximum length is 64 characters.

The Alias value can contain letters, numbers and the following characters:

  • !, #, %, *, +, -, /, =, ?, ^, _, and ~.
  • $, &, ', `, {, }, and | need to be escaped (for example -Alias what`'snew) or the entire value enclosed in single quotation marks (for example, -Alias 'what'snew'). The & character is not supported in the Alias value for Microsoft Entra Connect synchronization.
  • Periods (.) must be surrounded by other valid characters (for example, help.desk).
  • Unicode characters U+00A1 to U+00FF.

When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (alias@domain). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (รถ) is changed to oe in the primary email address.

If you don't use the Alias parameter when you create a recipient, the value of a different required parameter is used for the Alias property value:

  • Recipients with user accounts (for example, user mailboxes, and mail users): The left side of the MicrosoftOnlineServicesID or UserPrincipalName parameter is used. For example, helpdesk@contoso.onmicrosoft.com results in the Alias property value helpdesk.
  • Recipients without user accounts (for example, room mailboxes, mail contacts, and distribution groups): The value of the Name parameter is used. Spaces are removed and unsupported characters are converted to question marks (?).

If you modify the Alias value of an existing recipient, the primary email address is automatically updated only in environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is True for the recipient).

The Alias parameter never generates or updates the primary email address of a mail contact or a mail user.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ArbitrationMailbox

This parameter is available only in Exchange Server 2010.

The ArbitrationMailbox parameter specifies the mailbox used to manage the moderation process. You can use any value that uniquely identifies the mailbox. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)
Type:MailboxIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-BypassModerationFromSendersOrMembers

The BypassModerationFromSendersOrMembers parameter specifies who is allowed to send messages to this moderated recipient without approval from a moderator. Valid values for this parameter are individual senders and groups in your organization. Specifying a group means all members of the group are allowed to send messages to this recipient without approval from a moderator.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

To enter multiple senders and overwrite any existing entries, use the following syntax: Sender1,Sender2,...SenderN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Sender1","Sender2",..."SenderN".

To add or remove one or more senders without affecting any existing entries, use the following syntax: @{Add="Sender1","Sender2"...; Remove="Sender3","Sender4"...}.

This parameter is meaningful only when moderation is enabled for the recipient. By default, this parameter is blank ($null), which means messages from all senders other than the designated moderators are moderated. When a moderator sends a message to this recipient, the message is isn't moderated. In other words, you don't need to use this parameter to include the moderators.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Contacts

The Contacts parameter specifies the contacts for the public folder. Contacts are persons about whom you can save several types of information, such as addresses, telephone numbers, and web page URLs.

Valid values for this parameter are recipients in your organization. You can use any value that uniquely identifies the recipient. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

Type:RecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CreateDTMFMap

The CreateDTMFMap parameter specifies that a dual tone multi-frequency (DTMF) map be created for the user.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-CustomAttribute1

This parameter specifies a value for the CustomAttribute1 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute10

This parameter specifies a value for the CustomAttribute10 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute11

This parameter specifies a value for the CustomAttribute11 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute12

This parameter specifies a value for the CustomAttribute12 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute13

This parameter specifies a value for the CustomAttribute13 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute14

This parameter specifies a value for the CustomAttribute14 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute15

This parameter specifies a value for the CustomAttribute15 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute2

This parameter specifies a value for the CustomAttribute2 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute3

This parameter specifies a value for the CustomAttribute3 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute4

This parameter specifies a value for the CustomAttribute4 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute5

This parameter specifies a value for the CustomAttribute5 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute6

This parameter specifies a value for the CustomAttribute6 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute7

This parameter specifies a value for the CustomAttribute7 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute8

This parameter specifies a value for the CustomAttribute8 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CustomAttribute9

This parameter specifies a value for the CustomAttribute9 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DeliverToMailboxAndForward

The DeliverToMailboxAndForward parameter specifies the message delivery behavior when a forwarding address is specified by the ForwardingAddress or ForwardingSmtpAddress parameters. Valid values are:

  • $true: Messages are delivered to this public folder and forwarded to the specified recipient or email address.
  • $false: If a forwarding recipient or email address is configured, messages are delivered only to the specified recipient or email address, and messages aren't delivered to this public folder. If no forwarding recipient or email address is configured, messages are delivered only to this public folder.

The default value is $false. The value of this parameter is meaningful only if you configure a forwarding recipient or email address.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DisplayName

The DisplayName parameter specifies the display name of the Public Folder Proxy object. The display name is visible in the Exchange admin center, address lists, and Outlook. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-EmailAddresses

The EmailAddresses parameter specifies all email addresses (proxy addresses) for the recipient, including the primary SMTP address. In on-premises Exchange organizations, the primary SMTP address and other proxy addresses are typically set by email address policies. However, you can use this parameter to configure other proxy addresses for the recipient. For more information, see Email address policies in Exchange Server.

Valid syntax for this parameter is "Type:EmailAddress1","Type:EmailAddress2",..."Type:EmailAddressN". The optional Type value specifies the type of email address. Examples of valid values include:

  • SMTP: The primary SMTP address. You can use this value only once in a command.
  • smtp: Other SMTP email addresses.
  • X400: X.400 addresses in on-premises Exchange.
  • X500: X.500 addresses in on-premises Exchange.

If you don't include a Type value for an email address, the address is assumed to be an SMTP email address. The syntax of SMTP email addresses is validated, but the syntax of other email address types isn't validated. Therefore, you need to verify that any custom addresses are formatted correctly.

To specify the primary SMTP email address, you can use any of the following methods:

  • Use the Type value SMTP on the address.
  • The first email address when you don't use any Type values, or when you use multiple lowercase smtp Type values.
  • Use the PrimarySmtpAddress parameter instead. You can't use the EmailAddresses parameter and the PrimarySmtpAddress parameter in the same command.

The PrimarySmtpAddress parameter updates the primary email address and WindowsEmailAddress property to the same value.

To replace all existing proxy email addresses with the values you specify, use the following syntax: "Type:EmailAddress1","Type:EmailAddress2",..."Type:EmailAddressN".

To add or remove specify proxy addresses without affecting other existing values, use the following syntax: @{Add="Type:EmailAddress1","Type:EmailAddress2",...; Remove="Type:EmailAddress3","Type:EmailAddress4",...}.

Type:ProxyAddressCollection
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-EmailAddressPolicyEnabled

The EmailAddressPolicyEnabled parameter specifies whether to apply email address policies to this recipient. Valid values are:

  • $true: Email address policies are applied to this recipient. This is the default value.
  • $false: Email address policies aren't applied to this recipient.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-EntryId

The EntryId parameter specifies the EntryID value for the public folder. You use this parameter to correct an existing EntryID that points to a folder that can't be found.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ExtensionCustomAttribute1

This parameter specifies a value for the ExtensionCustomAttribute1 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To enter multiple values that overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute1 -eq 'Value'" will return a match if the property contains the specified value.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ExtensionCustomAttribute2

This parameter specifies a value for the ExtensionCustomAttribute2 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To enter multiple values that overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute2 -eq 'Value'" will return a match if the property contains the specified value.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ExtensionCustomAttribute3

This parameter specifies a value for the ExtensionCustomAttribute3 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To enter multiple values that overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute3 -eq 'Value'" will return a match if the property contains the specified value.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ExtensionCustomAttribute4

This parameter specifies a value for the ExtensionCustomAttribute4 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To enter multiple values that overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute4 -eq 'Value'" will return a match if the property contains the specified value.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ExtensionCustomAttribute5

This parameter specifies a value for the ExtensionCustomAttribute5 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To enter multiple values that overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute5 -eq 'Value'" will return a match if the property contains the specified value.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ExternalEmailAddress

The ExternalEmailAddress parameter specifies an email address outside the organization.

Type:ProxyAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ForwardingAddress

The ForwardingAddress parameter specifies a forwarding address for messages that are sent to this public folder. A valid value for this parameter is a recipient in your organization. You can use any value that uniquely identifies the recipient. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

How messages are delivered and forwarded is controlled by the DeliverToMailboxAndForward parameter.

  • DeliverToMailboxAndForward is $true: Messages are delivered to this public folder and forwarded to the specified recipient.
  • DeliverToMailboxAndForward is $false: Messages are only forwarded to the specified recipient. Messages aren't delivered to this public folder.

The default value is blank ($null), which means no forwarding recipient is configured.

Type:RecipientIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-GrantSendOnBehalfTo

The GrantSendOnBehalfTo parameter specifies who can send on behalf of this public folder. Although messages sent on behalf of the mail user clearly show the sender in the From field (<Sender> on behalf of <PublicFolder>), replies to these messages are delivered to the public folder, not the sender.

The sender you specify for this parameter must a mailbox, mail user or mail-enabled security group (a mail-enabled security principal that can have permissions assigned). You can use any value that uniquely identifies the sender. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

To enter multiple values and overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

By default, this parameter is blank, which means no one else has permission to send on behalf of this public folder.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-HiddenFromAddressListsEnabled

The HiddenFromAddressListsEnabled parameter specifies whether this recipient is visible in address lists. Valid values are:

  • $true: The recipient isn't visible in address lists.
  • $false: The recipient is visible in address lists. This is the default value.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Identity

The Identity parameter specifies the GUID or public folder name that represents a specific public folder. You can also include the path using the format \TopLevelPublicFolder\PublicFolder.

You can omit the parameter label so that only the public folder name or GUID is supplied.

Type:MailPublicFolderIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-IgnoreDefaultScope

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.

This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:

  • You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
  • You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

The IgnoreMissingFolderLink parameter specifies whether to exclude the mail-enabled public folder from a specific validation check that's used during a public folder migration. Valid values are:

  • $true: Skip the validation check. If the Active Directory object for the mail-enabled public folder doesn't have EntryId or ContentMailbox property values, the public folder is ignored, and the public folder migration can continue.
  • $false: Don't skip the validation check. If the Active Directory object for the mail-enabled public folder doesn't have EntryId or ContentMailbox property values, the entire public folder migration will fail. This is the default value.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-MailTip

The MailTip parameter specifies the custom MailTip text for this recipient. The MailTip is shown to senders when they start drafting an email message to this recipient. If the value contains spaces, enclose the value in quotation marks (").

When you add a MailTip to a recipient, two things happen:

  • HTML tags are automatically added to the text. For example, if you enter the text: "This mailbox is not monitored", the MailTip automatically becomes: <html><body>This mailbox is not monitored</body></html>. Additional HTML tags aren't supported, and the length of the MailTip can't exceed 175 displayed characters.
  • The text is automatically added to the MailTipTranslations property of the recipient as the default value: default:<MailTip text>. If you modify the MailTip text, the default value is automatically updated in the MailTipTranslations property, and vice-versa.
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MailTipTranslations

The MailTipTranslations parameter specifies additional languages for the custom MailTip text that's defined by the MailTip parameter. HTML tags are automatically added to the MailTip translation, additional HTML tags aren't supported, and the length of the MailTip translation can't exceed 175 displayed characters.

To add or remove MailTip translations without affecting the default MailTip or other MailTip translations, use the following syntax:

@{Add="Culture1:Localized text 1","\Culture2:Localized text 2"...; Remove="Culture3:Localized text 3","Culture4:Localized text 4"...}.

CultureN is a valid ISO 639 two-letter culture code that's associated with the language.

For example, suppose this recipient currently has the MailTip text: "This mailbox is not monitored." To add the Spanish translation, use the following value for this parameter: @{Add="ES:Esta caja no se supervisa."}.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxReceiveSize

The MaxReceiveSize parameter specifies the maximum size of a message that can be sent to the public folder. Messages larger than the maximum size are rejected.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

A valid value is a number up to 1.999999 gigabytes (2147483647 bytes) or the value unlimited. The default value is unlimited, which indicates the maximum size is imposed elsewhere (for example, organization, server, or connector limits).

Base64 encoding increases the size of messages by approximately 33%, so specify a value that's 33% larger than the actual maximum message size that you want to enforce. For example, the value 64 MB results in a maximum message size of approximately 48 MB.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxSendSize

The MaxSendSize parameter specifies the maximum size of a message that can be sent by the public folder.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

A valid value is a number up to 1.999999 gigabytes (2147483647 bytes) or the value unlimited. The default value is unlimited, which indicates the maximum size is imposed elsewhere (for example, organization, server, or connector limits).

Base64 encoding increases the size of messages by approximately 33%, so specify a value that's 33% larger than the actual maximum message size that you want to enforce. For example, the value 64 MB results in a maximum message size of approximately 48 MB.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ModeratedBy

The ModeratedBy parameter specifies one or more moderators for this recipient. A moderator approves messages sent to the recipient before the messages are delivered. A moderator must be a mailbox, mail user, or mail contact in your organization. You can use any value that uniquely identifies the moderator. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

To enter multiple values and overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

You need to use this parameter to specify at least one moderator when you set the ModerationEnabled parameter to the value $true.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ModerationEnabled

The ModerationEnabled parameter specifies whether moderation is enabled for this recipient. Valid value are:

  • $true: Moderation is enabled for this recipient. Messages sent to this recipient must be approved by a moderator before the messages are delivered.
  • $false: Moderation is disabled for this recipient. Messages sent to this recipient are delivered without the approval of a moderator. This is the default value.

You use the ModeratedBy parameter to specify the moderators.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Name

The Name parameter specifies the unique name of the public folder. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-OnPremisesObjectId

The OnPremisesObjectId parameter specifies the ObjectID (GUID) value of the mail-enabled public folder from the on-premises environment.

Type:Guid
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-PhoneticDisplayName

The PhoneticDisplayName parameter specifies an alternate spelling of the user's name that's used for text to speech in Unified Messaging (UM) environments. Typically, you use this parameter when the pronunciation and spelling of the user's name don't match. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PrimarySmtpAddress

The PrimarySmtpAddress parameter specifies the primary return email address that's used for the recipient. You can't use the EmailAddresses and PrimarySmtpAddress parameters in the same command.

If you set the EmailAddressPolicyEnabled parameter to $false, you can specify the primary address using the PrimarySmtpAddress parameter, but the email addresses of the public folder are no longer automatically updated by email address policies.

The PrimarySmtpAddress parameter updates the primary email address and WindowsEmailAddress property to the same value.

Type:SmtpAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PublicFolderType

The PublicFolderType parameter specifies which of the following four types is assigned to the public folder:

  • GeneralPurpose
  • Mapi
  • Nntp
  • NotSpecified
Type:PublicFolderType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-RejectMessagesFrom

The RejectMessagesFrom parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are individual senders in your organization (mailboxes, mail users, and mail contacts). You can use any value that uniquely identifies the sender. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: Sender1,Sender2,...SenderN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Sender1","Sender2",..."SenderN".

To add or remove senders without affecting other existing entries, use the following syntax: @{Add="Sender1","Sender2"...; Remove="Sender3","Sender4"...}.

The senders you specify for this parameter are automatically copied to the RejectMessagesFromSendersOrMembers property. Therefore, you can't use the RejectMessagesFrom and RejectMessagesFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RejectMessagesFromDLMembers

The RejectMessagesFromDLMembers parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are groups in your organization (distribution groups, mail-enabled security groups, and dynamic distribution groups). Specifying a group means all members of the group aren't allowed to send messages to this recipient. You can use any value that uniquely identifies the group. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple groups separated by commas. To overwrite any existing entries, use the following syntax: Group1,Group2,...GroupN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Group1","Group2",..."GroupN".

To add or remove groups without affecting other existing entries, use the following syntax: @{Add="Group1","Group2"...; Remove="Group3","Group4"...}.

The groups you specify for this parameter are automatically copied to the RejectMessagesFromSendersOrMembers property. Therefore, you can't use the RejectMessagesFromDLMembers and RejectMessagesFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all groups.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RejectMessagesFromSendersOrMembers

The RejectMessagesFromSendersOrMembers parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are individual senders and groups in your organization. Individual senders are mailboxes, mail users, and mail contacts. Groups are distribution groups, mail-enabled security groups, and dynamic distribution groups. Specifying a group means all members of the group aren't allowed to send messages to this recipient.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: Sender1,Sender2,...SenderN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Sender1","Sender2",..."SenderN".

To add or remove individual senders or groups without affecting other existing entries, use the RejectMessagesFrom and RejectMessagesFromDLMembers parameters.

The individual senders and groups you specify for this parameter are automatically copied to the RejectMessagesFrom and RejectMessagesFromDLMembers properties, respectively. Therefore, you can't use the RejectMessagesFromSendersOrMembers parameter and the RejectMessagesFrom or RejectMessagesFromDLMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireSenderAuthenticationEnabled

The RequireSenderAuthenticationEnabled parameter specifies whether to accept messages only from authenticated (internal) senders. Valid values are:

  • $true: Messages are accepted only from authenticated (internal) senders. Messages from unauthenticated (external) senders are rejected.
  • $false: Messages are accepted from authenticated (internal) and unauthenticated (external) senders.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SendModerationNotifications

The SendModerationNotifications parameter specifies when moderation notification messages are sent. Valid values are:

  • Always: Notify all senders when their messages aren't approved. This is the default value.
  • Internal: Notify senders in the organization when their messages aren't approved.
  • Never: Don't notify anyone when a message isn't approved.

This parameter is only meaningful when moderation is enabled (the ModerationEnabled parameter has the value $true).

Type:TransportModerationNotificationFlags
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Server

The Server parameter specifies the Exchange server where you want to run this command. You can use any value that uniquely identifies the server. For example:

  • Name
  • FQDN
  • Distinguished name (DN)
  • Exchange Legacy DN

If you don't use this parameter, the command is run on the local server.

Type:ServerIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010

-SimpleDisplayName

The SimpleDisplayName parameter is used to display an alternative description of the object when only a limited set of characters is permitted. Valid characters are:

  • a - z
  • A - Z
  • 0 - 9
  • space
  • " ' ( ) + , - . / : ?
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-UMDtmfMap

This parameter is available only in Exchange Server 2010.

The UMDtmfMap parameter specifies if you want to create a user-defined DTMF map for the UM-enabled user.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WindowsEmailAddress

The WindowsEmailAddress parameter specifies the Windows email address for this recipient. This is a common Active Directory attribute that's present in all environments, including environments without Exchange. Using the WindowsEmailAddress parameter on a recipient has one of the following results:

  • In environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is set to the value True for the recipient), the WindowsEmailAddress parameter has no effect on the WindowsEmailAddress property or the primary email address value.
  • In environments where the recipient isn't subject to email address policies (the EmailAddressPolicyEnabled property is set to the value False for the recipient), the WindowsEmailAddress parameter updates the WindowsEmailAddress property and the primary email address to the same value.

The WindowsEmailAddress property is visible for the recipient in Active Directory Users and Computers in the E-mail attribute. The attribute common name is E-mail-Addresses, and the Ldap-Display-Name is mail. If you modify this attribute in Active Directory, the recipient's primary email address is not updated to the same value.

Type:SmtpAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.