Set-ClientAccessServer

This cmdlet is available only in on-premises Exchange.

Use the Set-ClientAccessServer cmdlet to modify settings that are associated with the Client Access server role.

Note: In Exchange 2013 or later, use the Set-ClientAccessService cmdlet instead. If you have scripts that use Set-ClientAccessServer, update them to use Set-ClientAccessService.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-ClientAccessServer
   [-Identity] <ClientAccessServerIdParameter>
   [-AlternateServiceAccountCredential <PSCredential[]>]
   [-CleanUpInvalidAlternateServiceAccountCredentials]
   [-Confirm]
   [-DomainController <Fqdn>]
   [-IrmLogEnabled <Boolean>]
   [-IrmLogMaxAge <EnhancedTimeSpan>]
   [-IrmLogMaxDirectorySize <Unlimited>]
   [-IrmLogMaxFileSize <ByteQuantifiedSize>]
   [-IrmLogPath <LocalLongFullPath>]
   [-IsOutOfService <Boolean>]
   [-RemoveAlternateServiceAccountCredentials]
   [-WhatIf]
   [<CommonParameters>]
Set-ClientAccessServer
   [-Identity] <ClientAccessServerIdParameter>
   [-Array <ClientAccessArrayIdParameter>]
   [-AutoDiscoverServiceInternalUri <Uri>]
   [-AutoDiscoverSiteScope <MultiValuedProperty>]
   [-Confirm]
   [-DomainController <Fqdn>]
   [-IrmLogEnabled <Boolean>]
   [-IrmLogMaxAge <EnhancedTimeSpan>]
   [-IrmLogMaxDirectorySize <Unlimited>]
   [-IrmLogMaxFileSize <ByteQuantifiedSize>]
   [-IrmLogPath <LocalLongFullPath>]
   [-IsOutOfService <Boolean>]
   [-WhatIf]
   [<CommonParameters>]

Description

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-ClientAccessServer -Identity "MBX-01" -AutoDiscoverServiceInternalUri "https://mbx01.contoso.com/autodiscover/autodiscover.xml" -AutoDiscoverSiteScope "Mail"

This example configures the internal Autodiscover URL for the Active Directory site named Mail in the client access services on the server named MBX-01.

Parameters

-AlternateServiceAccountCredential

The AlternateServiceAccountCredential parameter specifies an alternative service account username and password that's typically used for Kerberos authentication in Exchange Server 2010 coexistence environments. You can specify multiple values separated by commas.

A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.

Type:PSCredential[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Array

This parameter is reserved for internal Microsoft use.

Type:ClientAccessArrayIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDiscoverServiceInternalUri

The AutoDiscoverServiceInternalUri parameter specifies the internal URL of the Autodiscover service.

Type:Uri
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDiscoverSiteScope

The AutoDiscoverSiteScope parameter specifies the Active Directory site that the Autodiscover service is authoritative for. Clients that connect to the Autodiscover service by using the internal URL need to exist in the specified site.

To see the available Active Directory sites, use the Get-ADSite cmdlet.

To specify multiple values, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-CleanUpInvalidAlternateServiceAccountCredentials

The CleanUpInvalidAlternateServiceAccountCredentials switch specifies whether to remove a previously configured alternate service account that's no longer valid. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the server that you want to modify. You can use any value that uniquely identifies the server. For example:

  • Name
  • Distinguished name (DN)
  • FQDN
  • GUID
Type:ClientAccessServerIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IrmLogEnabled

This parameter is available only in Exchange Server 2010.

The IrmLogEnabled parameter specifies whether logging is enabled for Information Rights Management (IRM). Valid values are $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-IrmLogMaxAge

This parameter is available only in Exchange Server 2010.

The IrmLogMaxAge parameter specifies the max age for IRM logs. Logs older than the specified value are deleted.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify a 15-hour interval, enter 15:00:00. The default value is 30 days (30.00:00:00).

Type:EnhancedTimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-IrmLogMaxDirectorySize

This parameter is available only in Exchange Server 2010.

The IrmLogMaxDirectorySize parameter specifies the maximum directory size for IRM logs. When the maximum directory size is reached, the server deletes the old log files first.

A valid value is a number up to 909.5 terabytes (999999999999999 bytes) or the value unlimited. The default value is 250 megabytes (262144000 bytes).

When you enter a value, qualify the value with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)
  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-IrmLogMaxFileSize

This parameter is available only in Exchange Server 2010.

The IrmLogMaxFileSize parameter specifies the maximum size of the IRM log. This value can't be larger than the IrmLogMaxDirectorySize parameter value.

A valid value is a number up to 4 gigabytes (4294967296 bytes). The default value is 10 megabytes (10485760 bytes).

When you enter a value, qualify the value with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of this parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter.

Type:ByteQuantifiedSize
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-IrmLogPath

This parameter is available only in Exchange Server 2010.

The IrmLogPath parameter specifies the location of the IRM log files. The default location is %ExchangeInstallPath%Logging\IRMLogs.

Type:LocalLongFullPath
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-IsOutOfService

This parameter is available only in Exchange Server 2010.

This parameter is reserved for internal Microsoft use.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-RemoveAlternateServiceAccountCredentials

The RemoveAlternateServiceAccountCredentials switch specifies whether to remove a previously distributed alternate service account. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.