Installing the Firewall on the Second Array Member

You can now install the ISA Server 2004 Enterprise Edition software on the second array member. Perform the same procedure that you did when you installed the first array member. During installation, you will notice that you are not asked for the definition of the array’s Internal network. The reason for this is that you already defined the array’s Internal network when installing the first array member, so there is no reason to perform the procedure a second time.

After installing ISA Server 2004 Enterprise Edition on the second array member, configure the second array member to use the IP address on its intra-array communications interface for intra-array communications. Use the same procedure that you did for configuring the intra-array address for the first array member, except this time configure array-2 to use the IP address 222.222.222.2.