Share via


Event ID 1129 — Group Policy Preprocessing (Networking)

Applies To: Windows Server 2008

Group Policy processing requires network connectivity to one or more domain controllers. The Group Policy service reads information from Active Directory and the sysvol share located on a domain controller. The absence of network connectivity prevents Group Policy from applying to the user or computer.

Event Details

Product: Windows Operating System
ID: 1129
Source: Microsoft-Windows-GroupPolicy
Version: 6.0
Symbolic Name: gpEvent_NO_NETWORK
Message: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has succesfully processed. If you do not see a success message for several hours, then contact your administrator.

Resolve

Correct network connectivity

To correct network connectivity:

  1. Open a command prompt window on the computer, and then type ipconfig /all.
  2. Make sure that the computer has an IP address in the correct IP address range and does not have an Automatic Private IP Addressing (APIPA) address (an IP address in the 169.254.x.x range).
  3. Ping the loopback address of 127.0.0.1 to verify that TCP/IP is installed and correctly configured on the local computer. If the ping is unsuccessful, this may indicate a corrupt TCP/IP stack or a problem with the network adapter.
  4. Test whether you can ping the local IP address. If you can ping the loopback address but not the local IP address, there may be an issue with the routing table or with the network adapter driver.
  5. Ping the IP address of a domain controller in the users' and computers' domain. Failing to ping the these domain controllers indicates a potential problem with the network in between the computer and the domain controllers. Diagnose the problem further using Network troubleshooting procedures.
  6. Ping the fully qualified name of a domain controller in the users' and computers' domain. Failing to ping the name of these domain controllers indicates a potential problem with name resolution between the computer and the domain controllers.
  7. Follow Network troubleshooting procedures to diagnose the problem further (https://go.microsoft.com/fwlink/?LinkId=92706).

Note:

The steps listed above may have varying results if your network constrains or blocks ICMP packets.

Verify

Group Policy applies during computer startup and user logon. Afterward, Group Policy applies every 90 to 120 minutes. Events appearing in the event log may not reflect the most current state of Group Policy. Therefore, you should always refresh Group Policy to determine if Group Policy is working correctly.

To refresh Group Policy on a specific computer:

  1. Open the Start menu. Click All Programs and then click Accessories.
  2. Click Command Prompt.
  3. In the command prompt window, type gpupdate and then press ENTER.
  4. When the gpupdate command completes, open the Event Viewer.

Group Policy is working correctly if the last Group Policy event to appear in the System event log has one of the following event IDs:

  • 1500
  • 1501
  • 1502
  • 1503

Group Policy Preprocessing (Networking)

Group Policy Infrastructure