RRAS IGMP Enabling

Updated: November 29, 2007

Applies To: Windows Server 2008

Internet Group Management Protocol (IGMP) maintains host group membership on a local subnet. Hosts use IGMP to communicate multicast group membership requests with their local multicast router. Routers receive the group membership requests and periodically send queries to determine which host groups are active or inactive on the local subnet. IGMP must be enabled to support Level 2 multicasting. 

Events

Event ID Source Message

41003

Microsoft-Windows-RasRoutingProtocols-IGMPv2

IGMP was unable to allocate memory from its heap. The data is the error code.

41007

Microsoft-Windows-RasRoutingProtocols-IGMPv2

IGMP was unable to create an event. The data is the error code.

41011

Microsoft-Windows-RasRoutingProtocols-IGMPv2

IGMP could not schedule a task to be executed. This may have been caused by a memory allocation failure. The data is the error code.

41021

Microsoft-Windows-RasRoutingProtocols-IGMPv2

IGMPV2 was unable to enumerate network events on the local interface with IP address: %1. The data is the error code.

41022

Microsoft-Windows-RasRoutingProtocols-IGMPv2

IGMPV2 detected an error on the local interface with IP address: %1. The error occurred while the interface was receiving packets. The data is the error code.

Related Management Information

RRAS IGMP

Routing and Remote Access Service Infrastructure

Community Additions

ADD
Show: