New-MailboxSearch

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the New-MailboxSearch cmdlet to create a mailbox search and either get an estimate of search results, place search results on In-Place Hold or copy them to a Discovery mailbox. You can also place all contents in a mailbox on hold by not specifying a search query, which accomplishes similar results as Litigation Hold.

Note: As of October 2020, the *-MailboxSearch cmdlets are retired in Exchange Online PowerShell. Use the *-ComplianceSearch cmdlets in Security & Compliance PowerShell instead. For more information, see Retirement of legacy eDiscovery tools.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

New-MailboxSearch
   [-Name] <String>
   [-AllPublicFolderSources <Boolean>]
   [-AllSourceMailboxes <Boolean>]
   [-Confirm]
   [-Description <String>]
   [-DomainController <Fqdn>]
   [-DoNotIncludeArchive]
   [-EndDate <ExDateTime>]
   [-EstimateOnly]
   [-ExcludeDuplicateMessages <Boolean>]
   [-Force]
   [-IncludeKeywordStatistics]
   [-IncludeUnsearchableItems]
   [-InPlaceHoldEnabled <Boolean>]
   [-InPlaceHoldIdentity <String>]
   [-ItemHoldPeriod <Unlimited>]
   [-Language <CultureInfo>]
   [-LogLevel <LoggingLevel>]
   [-MessageTypes <KindKeyword[]>]
   [-Recipients <String[]>]
   [-SearchDumpster]
   [-SearchQuery <String>]
   [-Senders <String[]>]
   [-SourceMailboxes <RecipientIdParameter[]>]
   [-StartDate <ExDateTime>]
   [-StatusMailRecipients <RecipientIdParameter[]>]
   [-TargetMailbox <MailboxIdParameter>]
   [-WhatIf]
   [<CommonParameters>]

Description

The New-MailboxSearch cmdlet creates an In-Place eDiscovery search or an In-Place Hold. You can stop, start, modify, or remove the search.

By default, mailbox searches are performed across all Exchange 2013 or later Mailbox servers in an organization, unless you constrain the search to fewer mailboxes by using the SourceMailboxes parameter. To search mailboxes on Exchange 2010 Mailbox servers, run the command on an Exchange 2010 server.

For more information, see In-Place eDiscovery in Exchange Server and In-Place Hold and Litigation Hold in Exchange Server.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

New-MailboxSearch -Name "Legal-ProjectX" -SourceMailboxes DG-Marketing,DG-Executives -TargetMailbox LegalDiscovery@contoso.com -StartDate "01/01/2018" -EndDate "12/31/2018" -Recipients "@contoso.com" -SearchQuery "project report hasattachments:true" -StatusMailRecipients "DG-DiscoveryTeam"

This example creates the mailbox search Legal-ProjectX. The search uses several parameters to restrict the search query:

  • SourceMailboxes: This parameter restricts the search to members of the DG-Marketing and DG-Executives distribution groups.
  • Recipients: This parameter specifies that the search includes all mail sent to the domain contoso.com.
  • SearchQuery: This parameter specifies a KQL query for messages with either the words project or report and for messages with attachments.
  • StartDate and EndDate: These parameters specify the start date of January 1, 2018, and end date of December 31, 2018, for the search.
  • TargetMailbox: This parameter specifies that search results should be copied to the discovery mailbox LegalDiscovery.
  • StatusMailRecipients: This parameter specifies that the distribution group DG-DiscoveryTeam is to receive a notification when the search is complete.

Example 2

New-MailboxSearch -Name "Hold-ProjectX" -SourceMailboxes DG-Finance -InPlaceHoldEnabled $true

This example creates an In-Place Hold named Hold-ProjectX and places all members of the distribution group DG-Finance on hold. Because the search doesn't specify the SearchQuery and ItemHoldPeriod parameters, all messages in mailboxes returned are placed on indefinite In-Place Hold.

Example 3

New-MailboxSearch -Name "Hold-tailspintoys" -SourceMailboxes DG-Research -SearchQuery '"Patent" AND "Project tailspintoys"' -InPlaceHoldEnabled $true

This example creates an In-Place Hold named Hold-tailspintoys and places all members of the distribution group DG-Research on hold. Because the search specifies the SearchQuery parameter, only messages that match the search query are placed on indefinite In-Place Hold.

Example 4

New-MailboxSearch -Name "Hold for all PFs" -AllPublicFolderSources $true -InPlaceHoldEnabled $true

In on-premises Exchange, this example creates an In-Place Hold named Hold for all PFs that places all content in all public folders on In-Place hold, with an unlimited hold duration.

Parameters

-AllPublicFolderSources

The AllPublicFolderSources parameter specifies whether to include all public folders in the organization in the search. Valid values are:

  • $true: All public folders are included in the search. This value is required when the value of the AllSourceMailboxes parameter is $false and you don't specify one or more source mailboxes by using the SourceMailboxes parameter (the parameter value is blank [$null]).
  • $false: No public folders are included in the search. This is the default value. You can use this value when the value of the AllSourceMailboxes parameter is $true or you specify one or more source mailboxes by using the SourceMailboxes parameter (the parameter value isn't blank [$null]).
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllSourceMailboxes

The AllSourceMailboxes parameter specifies whether to include all mailboxes in the search. Valid values are:

  • $true: All mailboxes are included in the search. This value is required when the value of the AllPublicFolderSources parameter is $false and you don't specify one or more source mailboxes by using the SourceMailboxes parameter (the parameter value is blank [$null]).
  • $false: All mailboxes aren't included in the search. This is the default value. You can use this value when the value of the AllPublicFolderSources parameter is $true or you specify one or more source mailboxes by using the SourceMailboxes parameter (the parameter value isn't blank [$null]).
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Description

The Description parameter specifies a description for the search. The description isn't displayed to users. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DoNotIncludeArchive

This parameter is available only in Exchange Server 2010.

The DoNotIncludeArchive switch specifies that archive mailboxes are not included in the search. You don't need to specify a value with this switch.

By default, archive mailboxes are included in the search. To exclude archive mailboxes, use this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-EndDate

The EndDate parameter specifies the end date of the date range.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

Type:ExDateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-EstimateOnly

The EstimateOnly switch specifies that only an estimate of the number of items that will be returned is provided. You don't need to specify a value with this switch.

If you don't use this switch, messages are copied to the target mailbox.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ExcludeDuplicateMessages

The ExcludeDuplicateMessages parameter eliminates duplication of messages in search results. Valid values are:

  • $true: Copy a single instance of a message if the same message exists in multiple folders or mailboxes. This is the default value.
  • $false: Copy all instances of a message if the same message exists in multiple folders or mailboxes.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Force

The Force switch hides warning or confirmation messages. You don't need to specify a value with this switch.

You can use this switch to run tasks programmatically where prompting for administrative input is inappropriate.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-IncludeKeywordStatistics

The IncludeKeywordStatistics switch returns keyword statistics (number of instances for each keyword) in search results. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-IncludeUnsearchableItems

The IncludeUnsearchableItems switch specifies that items that couldn't be indexed by Exchange Search should be included in the results. You don't need to specify a value with this switch.

Unsearchable items aren't placed on hold for a query-based In-Place Hold. If you need to place unsearchable items on hold, you need to create an indefinite hold (a hold without specifying any search parameters, which provides functionality similar to Litigation Hold.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-InPlaceHoldEnabled

The InPlaceHoldEnabled parameter specifies whether to set an In-Place Hold on items in the search results. Valid values are:

  • $true: In-Place Hold is enabled on the search results.
  • $false: In-Place Hold isn't enabled on the search results. This is the default value.

You can't set an In-Place Hold on the search results when the AllSourceMailboxes parameter is $true.

If you attempt to place a hold but don't specify mailboxes using the SourceMailboxes parameter, the command may succeed but the mailboxes are not placed on In-Place Hold.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-InPlaceHoldIdentity

This parameter is reserved for internal Microsoft use.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ItemHoldPeriod

The ItemHoldPeriod parameter specifies the number of days for the In-Place Hold onthe mailbox items (all mailbox items or the items that are returned in the search query results). The duration is calculated from the time the item is received or created in the mailbox. Valid values are:

  • An integer.
  • The value unlimited. This is the default value. Items are held until you remove the In-Place Hold by removing the search by using the Remove-MailboxSearch cmdlet, removing the source mailbox from the search by using the Set-MailboxSearch cmdlet and the SourceMailboxes parameter, or in on-premises Exchange, you remove all public folders from the search by using the Set-MailboxSearch cmdlet to change the AllPublicFolderSources parameter from $true to $false.
Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Language

The Language parameter specifies a locale for the search.

Valid input for this parameter is a supported culture code value from the Microsoft .NET Framework CultureInfo class. For example, da-DK for Danish or ja-JP for Japanese. For more information, see CultureInfo Class.

Type:CultureInfo
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-LogLevel

The LogLevel parameter specifies the logging level for the search. Valid values are:

  • Suppress: No logs are kept.
  • Basic: Basic information about the query and who ran it is kept. This is the default value.
  • Full: In addition to the information kept by the Basic log level, the Full log level adds a complete list of search results.
Type:LoggingLevel
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MessageTypes

The MessageTypes parameter specifies the message types to include in the search query. Valid values are:

  • Contacts
  • Docs
  • Email
  • IM
  • Journals
  • Meetings
  • Notes
  • Tasks

You can specify multiple values separated by commas.

The default value is blank ($null), which means all message types are included.

Type:KindKeyword[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Name

The Name parameter specifies a friendly name for the search. If the value contains spaces, enclose the value in quotation marks (").

The value of this parameter is used to create the top-level folder that holds the search results in the target mailbox that's specified by the TargetMailbox parameter.

Type:String
Position:1
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Recipients

The Recipients parameter specifies one or more recipients to include in the search query. Messages that have the specified recipients in the To, Cc, and Bcc fields are returned in the search results.

You can specify multiple recipients separated by commas.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SearchDumpster

This parameter is available only in Exchange Server 2010.

The SearchDumpster switch specifies whether the dumpster is searched. You don't need to specify a value with this switch.

The dumpster is a storage area in the mailbox where deleted items are temporarily stored after being deleted or removed from the Deleted Items folder, or after being hard-deleted and before being purged from the mailbox based on Deleted Item Retention settings.

Type:SwitchParameter
Position:Named
Default value:True
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-SearchQuery

The SearchQuery parameter specifies keywords for the search query by using the Keyword Query Language (KQL). For more information, see Keyword Query Language (KQL) syntax reference and Keyword queries and search conditions for eDiscovery.

If you use this parameter with other search query parameters, the query combines these parameters by using the AND operator.

The other search query parameters are:

  • EndDate
  • MessageTypes
  • Recipients
  • Senders
  • StartDate
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Senders

The Senders parameter specifies one or more senders to include in the search query. Messages that have the specified sender are returned in the search results. Senders can include users, distribution groups (messages sent by members of the group), SMTP addresses, or domains.

You can specify multiple senders separated by commas. If the value contains spaces, enclose the value in quotation marks (").

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SourceMailboxes

The SourceMailboxes parameter specifies the identity of one or more mailboxes to be searched. You can use any value that uniquely identifies the mailbox. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

To use this parameter, the AllSourceMailboxes parameter needs to be $false (the default value).

The default value is blank ($null), which means no source mailboxes are specified. To clear the source mailboxes, use the value $null.

To enable In-Place Hold on the search results, you need to set the AllSourceMailboxes parameter to $false (the default value) and configure one or both of the following settings:

  • Specify one ore more source mailboxes by using the SourceMailboxes parameter.
  • In on-premises Exchange, set the AllPublicFolderSources parameter to $true.
Type:RecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-StartDate

The StartDate parameter specifies the start date of the date range.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

Type:ExDateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-StatusMailRecipients

The StatusMailRecipients parameter specifies one or more recipients to receive a status email message upon completion of the search. You can use any value that uniquely identifies the recipient. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

Type:RecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-TargetMailbox

The TargetMailbox parameter specifies the destination mailbox where the search results are copied. You can use any value that uniquely identifies themailbox. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)
Type:MailboxIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-WhatIf

The WhatIf switch doesn't work on this cmdlet.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.