Event ID 11153 — DNS Client Registration

Updated: November 25, 2009

Applies To: Windows Server 2008 R2

yellow

A computer that is configured to use Dynamic Host Configuration Protocol (DHCP) to obtain IP addresses can automatically register its IP address and Domain Name System (DNS) name with the DNS server that is authoritative for the zone that hosts its domain. This eliminates the need for an administrator to manage host (A or AAAA) resource records for client computers. Problems with automatic registration do not prevent a computer from accessing the network, but they can prevent other network computers from being able to locate the computer.

Event Details

Product: Windows Operating System
ID: 11153
Source: DnsApi
Version: 6.1
Symbolic Name: EVENT_DNSAPI_REGISTRATION_FAILED_REFUSED
Message: The system failed to register host (A) resource records for the network adapter with these settings:

Adapter Name: %1
Host Name: %2
Primary Domain Suffix: %3
DNS server list:
%4
Sent update to server: %5
IP Address(es):
%6%

The DNS server refused the dynamic update request. This can happen because current DNS update policies do not allow this computer to update the DNS domain name that is configured for this adapter, or the authoritative DNS server for this DNS domain name does not support the DNS dynamic update protocol.

To add or register a DNS host (A) resource record using the specific DNS name for this adapter, contact your network administrator.

Resolve

Contact your network administrator

To resolve this problem, contact your network administrator, and provide the information in the event message.

If you are a network administrator, see Troubleshooting Dynamic Updates (http://go.microsoft.com/fwlink/?LinkId=103842) for information about troubleshooting DNS registration.

Verify

Use the ipconfig /registerdns command to register the computer's network name and address with a DNS server and then check the event log for errors.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To register the computer's network name and address with a DNS server:

  1. On the DNS client, open a command prompt. To open an elevated Command Prompt window, click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
  2. Type the following command, and then press ENTER:

    ipconfig /registerdns

Wait 15 minutes, and then check the event log to verify that a DNSapi event with an ID in the range 11150 through 11167 was not logged after you ran the command.

Related Management Information

DNS Client Registration

DNS Infrastructure

Community Additions

ADD
Show: