Set-IpamBlock
Set-IpamBlock
Modifies an IP address block in IPAM.
Syntax
Parameter Set: ByKeySet
Set-IpamBlock [-NetworkId] <String[]> [-StartIPAddress] <IPAddress[]> [-EndIPAddress] <IPAddress[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-LastAssignedDate <DateTime> ] [-NewEndIpAddress <IPAddress> ] [-NewNetworkId <String> ] [-NewStartIpAddress <IPAddress> ] [-Owner <String> ] [-PassThru] [-Rir <String> ] [-RirReceivedDate <DateTime> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-IpamBlock -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-LastAssignedDate <DateTime> ] [-NewEndIpAddress <IPAddress> ] [-NewNetworkId <String> ] [-NewStartIpAddress <IPAddress> ] [-Owner <String> ] [-PassThru] [-Rir <String> ] [-RirReceivedDate <DateTime> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detailed Description
The Set-IpamBlock cmdlet modifies an IP address block in IP Address Management (IPAM). Specify an address block by using the StartIPAddress and EndIPAddress parameters, or use the InputObject parameter to specify the input to this cmdlet.
If you specify the NewStartIpAddress, NewEndIpAddress, or NewNetworkId parameters, the cmdlet resets the utilization trend information for the address block.
Parameters
-AsJob
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-CimSession<CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Aliases |
Session |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Description<String>
Specifies a description for the address block.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-EndIPAddress<IPAddress[]>
Specifies the end address of the IP address block. If you specify this parameter, you must specify the StartIPAddress parameter.
Aliases |
none |
Required? |
true |
Position? |
4 |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-InputObject<CimInstance[]>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Aliases |
none |
Required? |
true |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByValue) |
Accept Wildcard Characters? |
false |
-LastAssignedDate<DateTime>
Specifies the last date, as a DateTime object, on which the block was assigned to devices on a network. To obtain a DateTime object, use the Get-Date cmdlet. For more information, type Get-Help Get-Date.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-NetworkId<String[]>
Specifies the IP network prefix, in Classless Interdomain Routing (CIDR) notation, for the network block that you want modified.
Aliases |
none |
Required? |
true |
Position? |
2 |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-NewEndIpAddress<IPAddress>
Specifies a new value for the end IP address of the address block. Specify a value that is compatible with the values that you specify for the NewNetworkId and NewStartIPAddress parameters.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-NewNetworkId<String>
Specifies an IP network prefix, in Classless Interdomain Routing (CIDR) notation. This is the new value for the network from which the IP address block is added to IPAM.
Specify a value that is compatible with the values that you specify for the NewStartIPAddress and NewEndIpAddress parameters.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-NewStartIpAddress<IPAddress>
Specifies a new value for the start IP address of the address block. Specify a value that is compatible with the values that you specify for the NewNetworkId and NewEndIPAddress parameters.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-Owner<String>
Specifies the owner of the IP address block.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Rir<String>
Specifies the regional internet registry (RIR) for public addresses. RIR is a built-in custom field in the IPAM server that contains the following built-in values:
-- AFRINIC
-- APNIC
-- ARIN
-- LACNIC
-- RIPE
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-RirReceivedDate<DateTime>
Specifies the date, as a DateTime object, when you obtained the public address block from the RIR.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-StartIPAddress<IPAddress[]>
Specifies the start address for the IP address block. If you specify this parameter, you must specify the EndIPAddress parameter.
Aliases |
none |
Required? |
true |
Position? |
3 |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before running the cmdlet.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Inputs
The input type is the type of the objects that you can pipe to the cmdlet.
Outputs
The output type is the type of the objects that the cmdlet emits.
IpamBlock
Represents an address block object in IPAM.
Examples
Example 1: Modify the description child IP address ranges
This example modifies the description of all child IP address ranges that belongs to an address block.
The first command gets an IpamBlock object that contains the IP address block from the network that has the ID 10.0.0.0/8. The command stores the IpamBlock object in the $Parent variable.
The second command gets all the child IP address ranges for the address block stored in the $Parent variable. The command passes the child IP address ranges to the Set-IpamBlock cmdlet by using the pipeline operator. The command modifies the description for the child IP address ranges.
PS C:\> $Parent = Get-IpamBlock -NetworkId "10.0.0.0/8" -StartIPAddress 10.0.0.0 -EndIPAddress 10.255.255.255PS C:\>Get-IpamBlock -MappingToParentBlock $Parent | Set-IpamBlock -Description "IP Blocks assigned to Site01" -PassThru
Example 2: Modify key properties of an address block
This command uses the Get-IpamBlock to gets the IP address block from the network that has the ID 10.11.0.0/16. The command specifies the start and end address of the address block. The command passes the address block to the Set-IpamBlock cmdlet by using the pipeline operator. The Set-IpamBlock cmdlet specifies new values for the network ID, start address and end address for the address block. Because the command modifies the network ID, start address, and end address of the address block, the command resets the utilization trend of the address block.
PS C:\> Get-IpamBlock -NetworkId "10.11.0.0/16" -StartIPAddress 10.11.0.0 -EndIPAddress 10.11.255.255 | Set-IpamBlock -NewNetworkId 10.13.0.0/16 -NewStartIPAddress 10.13.0.0 -NewEndIpAddress 10.13.255.255