Share via


Configuring Authentication Policies

 

Applies To: Windows Server 2012 R2

In AD FS in Windows Server 2012 R2, both access control and the authentication mechanism are enhanced with multiple factors that include user, device, location, and authentication data. These enhancements enable you, either through the user interface or through Windows PowerShell, to manage the risk of granting access permissions to AD FS-secured applications via multi-factor access control and multi-factor authentication that are based on user identity or group membership, network location, device data that is workplace-joined, and the authentication state when multi-factor authentication (MFA) was performed.

For more information about MFA and multi-factor access control in Active Directory Federation Services (AD FS) in Windows Server 2012 R2, see the following topics:

Configure authentication policies via the AD FS Management snap-in

Membership in Administrators, or equivalent, on the local computer is the minimum requirement to complete these procedures. Review details about using the appropriate accounts and group memberships at Local and Domain Default Groups (https://go.microsoft.com/fwlink/?LinkId=83477).

In AD FS in Windows Server 2012 R2, you can specify an authentication policy at a global scope that is applicable to all applications and services that are secured by AD FS. You can also set authentication policies for specific applications and services that rely on party trusts and are secured by AD FS. Specifying an authentication policy for a particular application per relying party trust does not override the global authentication policy. If either global or per relying party trust authentication policy requires MFA, MFA is triggered when the user tries to authenticate to this relying party trust. The global authentication policy is a fallback for relying party trusts for applications and services that do not have a specific configured authentication policy.

To configure primary authentication globally

  1. In Server Manager, click Tools, and then select AD FS Management.

  2. In AD FS snap-in, click Authentication Policies.

  3. In the Primary Authentication section, click Edit next to Global Settings. You can also right-click Authentication Policies, and select Edit Global Primary Authentication, or, under the Actions pane, select Edit Global Primary Authentication.

  4. In the Edit Global Authentication Policy window, on the Primary tab, you can configure the following settings as part of the global authentication policy:

To configure primary authentication per relying party trust

  1. In Server Manager, click Tools, and then select AD FS Management.

  2. In AD FS snap-in, click Authentication Policies\Per Relying Party Trust, and then click the relying party trust for which you want to configure authentication policies.

  3. Either right-click the relying party trust for which you want to configure authentication policies, and then select Edit Custom Primary Authentication, or, under the Actions pane, select Edit Custom Primary Authentication.

  4. In the Edit Authentication Policy for <relying_party_trust_name> window, under the Primary tab, you can configure the following setting as part of the Per Relying Party Trust authentication policy:

    • Whether users are required to provide their credentials each time at sign-in via the Users are required to provide their credentials each time at sign-in check box.

To configure multi-factor authentication globally

  1. In Server Manager, click Tools, and then select AD FS Management.

  2. In AD FS snap-in, click Authentication Policies.

  3. In the Multi-factor Authentication section, click Edit next to Global Settings. You can also right-click Authentication Policies, and select Edit Global Multi-factor Authentication, or, under the Actions pane, select Edit Global Multi-factor Authentication.

  4. In the Edit Global Authentication Policy window, under the Multi-factor tab, you can configure the following settings as part of the global multi-factor authentication policy:

    • Settings or conditions for MFA via available options under the Users/Groups, Devices, and Locations sections.

    • To enable MFA for any of these settings, you must select at least one additional authentication method. Certificate Authentication is the default available option. You can also configure other custom additional authentication methods, for example, Windows Azure Active Authentication. For more information, see Walkthrough Guide: Manage Risk with Additional Multi-Factor Authentication for Sensitive Applications.

      Warning

      You can only configure additional authentication methods at a globally.

To configure multi-factor authentication per relying party trust

  1. In Server Manager, click Tools, and then select AD FS Management.

  2. In AD FS snap-in, click Authentication Policies\Per Relying Party Trust, and then click the relying party trust for which you want to configure MFA.

  3. Either right-click the relying party trust for which you want to configure MFA, and then select Edit Custom Multi-factor Authentication, or, under the Actions pane, select Edit Custom Multi-factor Authentication.

  4. In the Edit Authentication Policy for <relying_party_trust_name> window, under the Multi-factor tab, you can configure the following settings as part of the per-relying party trust authentication policy:

    • Settings or conditions for MFA via available options under the Users/Groups, Devices, and Locations sections.

Configure authentication policies via Windows PowerShell

Windows PowerShell enables greater flexibility in using various factors of access control and the authentication mechanism that are available in AD FS in Windows Server 2012 R2 to configure authentication policies and authorization rules that are necessary to implement true conditional access for your AD FS -secured resources.

Membership in Administrators, or equivalent, on the local computer is the minimum requirement to complete these procedures. Review details about using the appropriate accounts and group memberships at Local and Domain Default Groups (https://go.microsoft.com/fwlink/?LinkId=83477).

To configure an additional authentication method via Windows PowerShell

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    Set-AdfsGlobalAuthenticationPolicy –AdditionalAuthenticationProvider CertificateAuthentication
    

    Warning

    To verify that this command ran successfully, you can run the Get-AdfsGlobalAuthenticationPolicy command.

To configure MFA per-relying party trust that is based on a user’s group membership data

  1. On your federation server, open the Windows PowerShell command window and run the following command:

    $rp = Get-AdfsRelyingPartyTrust –Name relying_party_trust
    

    Warning

    Ensure to replace <relying_party_trust> with the name of your relying party trust.

  2. In the same Windows PowerShell command window, run the following command.

    $MfaClaimRule = “c:[Type == ‘“https://schemas.microsoft.com/ws/2008/06/identity/claims/groupsid’”, Value =~ ‘“^(?i) <group_SID>$’”] => issue(Type = ‘“https://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod’”, Value = ‘“https://schemas.microsoft.com/claims/multipleauthn’”);”
    
    Set-AdfsRelyingPartyTrust –TargetRelyingParty $rp –AdditionalAuthenticationRules $MfaClaimRule
    

    Note

    Ensure to replace <group_SID> with the value of the security identifier (SID) of your Active Directory (AD) group.

To configure MFA globally based on users' group membership data

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $MfaClaimRule = “c:[Type == ‘" https://schemas.microsoft.com/ws/2008/06/identity/claims/groupsid’", Value == ‘"group_SID’"]
     => issue(Type = ‘"https://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod’", Value = ‘"https://schemas.microsoft.com/claims/multipleauthn’");”
    
    Set-AdfsAdditionalAuthenticationRule $MfaClaimRule
    

    Note

    Ensure to replace <group_SID> with the value of the SID of your AD group.

To configure MFA globally based on user’s location

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $MfaClaimRule = “c:[Type == ‘" https://schemas.microsoft.com/ws/2012/01/insidecorporatenetwork’", Value == ‘"true_or_false’"]
     => issue(Type = ‘"https://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod’", Value = ‘"https://schemas.microsoft.com/claims/multipleauthn’");”
    
    Set-AdfsAdditionalAuthenticationRule $MfaClaimRule
    

    Note

    Ensure to replace <true_or_false> with either true or false. The value depends on your specific rule condition that is based on whether the access request comes from the extranet or the intranet.

To configure MFA globally based on user’s device data

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $MfaClaimRule = "c:[Type == ‘" https://schemas.microsoft.com/2012/01/devicecontext/claims/isregistereduser’", Value == ‘"true_or_false"']
     => issue(Type = ‘"https://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod’", Value = ‘"https://schemas.microsoft.com/claims/multipleauthn’");"
    
    Set-AdfsAdditionalAuthenticationRule $MfaClaimRule
    

    Note

    Ensure to replace <true_or_false> with either true or false. The value depends on your specific rule condition that is based on whether the device is workplace-joined or not.

To configure MFA globally if the access request comes from the extranet and from a non-workplace-joined device

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    Set-AdfsAdditionalAuthenticationRule "c:[Type == `"https://schemas.microsoft.com/2012/01/devicecontext/claims/isregistereduser`", Value == `"true_or_false`"] && c2:[Type == `"https://schemas.microsoft.com/ws/2012/01/insidecorporatenetwork`", Value == `" true_or_false `"] => issue(Type = `"https://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod`", Value =`"https://schemas.microsoft.com/claims/multipleauthn`");"
    

    Note

    Ensure to replace both instances of <true_or_false> with either true or false, which depends on your specific rule conditions. The rule conditions are based on whether the device is workplace-joined or not and whether the access request comes from the extranet or intranet.

To configure MFA globally if access comes from an extranet user that belongs to a certain group

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    Set-AdfsAdditionalAuthenticationRule "c:[Type == `"https://schemas.microsoft.com/ws/2008/06/identity/claims/groupsid`", Value == `"group_SID`"]
     && c2:[Type == `"https://schemas.microsoft.com/ws/2012/01/insidecorporatenetwork`", Value == `"true_or_false`"] => issue(Type = `"https://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod`", Value =`"https://schemas.microsoft.com/claims/multipleauthn`");"
    

    Note

    Ensure to replace <group_SID> with the value of the group SID and <true_or_false> with either true or false, which depends on your specific rule condition that is based on whether the access request comes from the extranet or intranet.

To grant access to an application based on user data via Windows PowerShell

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $rp = Get-AdfsRelyingPartyTrust –Name relying_party_trust
    

    Note

    Ensure to replace <relying_party_trust> with the value of your relying party trust.

  2. In the same Windows PowerShell command window, run the following command.

                    $GroupAuthzRule = "@RuleTemplate = `“Authorization`” @RuleName = `"Foo`" c:[Type == `"https://schemas.microsoft.com/ws/2008/06/identity/claims/groupsid`", Value =~ `"^(?i)<group_SID>$`"] =>issue(Type = `"https://schemas.microsoft.com/authorization/claims/deny`", Value = `"DenyUsersWithClaim`");"
    Set-AdfsRelyingPartyTrust –TargetRelyingParty $rp –IssuanceAuthorizationRules $GroupAuthzRule
    

    Note

    Ensure to replace <group_SID> with the value of the SID of your AD group.

To grant access to an application that is secured by AD FS only if this user’s identity was validated with MFA

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $rp = Get-AdfsRelyingPartyTrust –Name relying_party_trust
    

    Note

    Ensure to replace <relying_party_trust> with the value of your relying party trust.

  2. In the same Windows PowerShell command window, run the following command.

    $GroupAuthzRule = "@RuleTemplate = `"Authorization`"
    @RuleName = `"PermitAccessWithMFA`"
    c:[Type == `"https://schemas.microsoft.com/claims/authnmethodsreferences`", Value =~ `"^(?i)https://schemas\.microsoft\.com/claims/multipleauthn$`"] => issue(Type = `"https://schemas.microsoft.com/authorization/claims/permit`", Value = ‘“PermitUsersWithClaim’");"
    

To grant access to an application that is secured by AD FS only if the access request comes from a workplace-joined device that is registered to the user

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $rp = Get-AdfsRelyingPartyTrust –Name relying_party_trust
    

    Note

    Ensure to replace <relying_party_trust> with the value of your relying party trust.

  2. In the same Windows PowerShell command window, run the following command.

    $GroupAuthzRule = "@RuleTemplate = `"Authorization`"
    @RuleName = `"PermitAccessFromRegisteredWorkplaceJoinedDevice`"
    c:[Type == `"https://schemas.microsoft.com/2012/01/devicecontext/claims/isregistereduser`", Value =~ `"^(?i)true$`"] => issue(Type = `"https://schemas.microsoft.com/authorization/claims/permit`", Value = `"PermitUsersWithClaim`");
    

To grant access to an application that is secured by AD FS only if the access request comes from a workplace-joined device that is registered to a user whose identity has been validated with MFA

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $rp = Get-AdfsRelyingPartyTrust –Name relying_party_trust
    

    Note

    Ensure to replace <relying_party_trust> with the value of your relying party trust.

  2. In the same Windows PowerShell command window, run the following command.

    $GroupAuthzRule = ‘@RuleTemplate = “Authorization”
    @RuleName = “RequireMFAOnRegisteredWorkplaceJoinedDevice”
    c1:[Type == `"https://schemas.microsoft.com/claims/authnmethodsreferences`", Value =~ `"^(?i)https://schemas\.microsoft\.com/claims/multipleauthn$`"] &&
    c2:[Type == `"https://schemas.microsoft.com/2012/01/devicecontext/claims/isregistereduser`", Value =~ `"^(?i)true$”] => issue(Type = "https://schemas.microsoft.com/authorization/claims/permit`", Value = `"PermitUsersWithClaim`");"
    

To grant extranet access to an application secured by AD FS only if the access request comes from a user whose identity has been validated with MFA

  1. On your federation server, open the Windows PowerShell command window and run the following command.

    $rp = Get-AdfsRelyingPartyTrust –Name relying_party_trust
    

    Note

    Ensure to replace <relying_party_trust> with the value of your relying party trust.

  2. In the same Windows PowerShell command window, run the following command.

    $GroupAuthzRule = "@RuleTemplate = `"Authorization`"
    @RuleName = `"RequireMFAForExtranetAccess`"
    c1:[Type == `"https://schemas.microsoft.com/claims/authnmethodsreferences`", Value =~ `"^(?i)https://schemas\.microsoft\.com/claims/multipleauthn$`"] &&
    c2:[Type == `"https://schemas.microsoft.com/ws/2012/01/insidecorporatenetwork`", Value =~ `"^(?i)false$`"] => issue(Type = `"https://schemas.microsoft.com/authorization/claims/permit`", Value = `"PermitUsersWithClaim`");"
    

See Also

AD FS Operations