Create retail product kits

Important

This content is archived and is not being updated. For the latest documentation, see Microsoft Dynamics 365 product documentation. For the latest release plans, see Dynamics 365 and Microsoft Power Platform release plans.

Applies To: Microsoft Dynamics AX 2012 R3

This topic describes the tasks that are required to set up retail product kits. By using product kits, you can package individual products into one sellable unit and make them available for sale in any retail channel. A product kit consists of kit components and component substitutes. Kit components can be either a distinct product or a product variant. Component substitutes can be a distinct product, product master, or product variant. The different combinations of components and component substitutes that are included in a product kit are referred to as kit configurations. One product kit can have one or more configurations.

After you create the product kits, you release the kits to the legal entities in which you want to offer them, and you define the product properties. After the kits have been released, you define the pricing for them. The kit price can also be adjusted at the time of sale if additional charges apply for products that are substituted for a standard kit component.

The following illustration shows the process flow for setting up a retail product kit. The numbers correspond to the procedures later in this topic.

Set up retail product kits

This task is part of a bigger process

The following illustration shows how the process of creating retail product kits relates to the overall process flow for retail product kits. For an overview of the process, see About setting up retail product kits.

The overall kit process flow

Prerequisites

The following table shows the prerequisites that must be in place before you start.

Category

Prerequisite

Set up kit parameters

Specify the journal name to use to generate trade agreements for products and product variants that are included in a retail product kit.

For more information about how to set up kit parameters, see Retail parameters (form).

Set up receipt formats for kit products

Specify whether to show the individual kit components on the product receipt. For more information about how to set up receipt formats for product kits, see POS functionality profile (form).

Set up products

Before you can add products, product variants, and product substitutes to a product kit, you must set up your products in Microsoft Dynamics AX. For more information about how to set up retail products, see Set up retail products.

1. Create a product kit

Create a new product, and designate it as a product kit. After you create the product kit, you can add products and product variants to the kit as your kit components. You can also add product substitutes for any of the kit components. For general information about how to create products in Microsoft Dynamics AX, see Key tasks: Define products.

To create a product kit, follow these steps:

  1. Click Retail > Common > Kits > Product kits.

  2. On the Product masters list page, on the Action Pane, on the Product tab, click Product.

  3. In the New product dialog box, enter the following information:

    • In the Product type field, select Item.

    • Enter a product number, product name, and search name.

    • Optional: In the Retail category field, select the retail product category that you want to assign the product kit to.

      The Product kit check box is selected by default.

    • In the Product dimension group field, select the product dimension group that includes the Configuration product dimension. For more information about product dimension groups, see Product dimension groups (form).

  4. Leave the default values for all other fields, and then click OK.

2. Add products and product substitutes to the product kit

Add the kit components and component substitutes to the kit to define every kit combination that you offer. Also, set up the kit configuration options to indicate whether the kit can be disassembled in the point-of-sale (POS) store.

  1. Click Retail > Common > Kits > Product kits.

  2. On the Product masters list page, select the new product kit that you created in the previous task. On the Action Pane, on the Product tab, click Configure.

  3. In the Configure kit form, click Edit.

  4. On the General FastTab, select the Disassemble at register check box if you allow the kit to be disassembled in the POS store, so that the kit components can be sold individually.

  5. On the Kit components FastTab, in the Components grid, click Add to add the base products to the kit.

  6. In the Add products form, select the products and product variants that you want to add to the product kit, and then click OK.

  7. In the Components grid, you can adjust the quantity and unit of measure for each kit component that you added.

  8. On the Kit components FastTab, in the Substitution grid, click Add to add product substitutes for selected base products in the kit.

  9. In the Add products form, select the products and product variants that you want to add as product substitutes, and then click OK.

  10. Repeat steps 8 and 9 for each product substitute that you want to add.

  11. After you have added all the product components and component substitutes to the kit, click Approve to approve the product kit.

    Note

    Product kits must have a status of Approved before you can release the kit to your legal entities, price the kit, or generate assembly orders.

Release the product kit to the legal entities in which the product kits will be sold. You must release the product kit in order to define the pricing for the kit configurations, set up the product properties for the kit, and generate assembly orders for the product kit.

For general information about how to release products to legal entities in Microsoft Dynamics AX, see Key tasks: Release products.

  1. Click Retail > Common > Kits > Product kits.

  2. On the Product masters list page, select the new product kit that you configured in the previous task, and then, on the Action Pane, on the Product tab, click Release products.

  3. In the Release products form, on the Select products tab, select the kit configurations that you want to release. By default, all configurations for the selected product kit are selected.

  4. On the Select companies tab, select the legal entities to which the kit should be released, and then click OK.

  5. In the Product release session batch form, click OK to run the process and release the products to the selected legal entities.

  6. To verify that the product kit has been released to the selected legal entities, follow these steps:

    1. Click Retail > Common > Kits > Released product kits.

    2. On the Released product kits list page, view your product kit.

4. Set the standard properties for the product kit

After you release the product kits to the legal entities, you can set the standard properties that apply to the products in the kit. These properties can include inventory dimensions, product categories, and product attributes. For general information about how to set up product properties, see Key tasks: Define products. For information about how to set up retail products, see Set up retail products.

  1. Click Retail > Common > Kits > Released product kits. On the Released product kits list page, double-click the product kit that you released in the previous task.

  2. In the Released product details form, click Edit. Then, on the Action Pane, on the Product tab, click Dimension groups, and select the inventory dimension groups for the product kit.

  3. On the General FastTab, in the Administration group, select the item model group for the kit, so that the kit can be assembled.

  4. On the Purchase FastTab, in the Unit field, select the unit of measure to use for the purchase of the product kit.

  5. On the Sell FastTab, in the Unit field, select the unit of measure to use for the sale of the product kit.

  6. On the Manage inventory FastTab, in the Inventory group, in the Unit field, select the unit of measure in which the product kit is stored in inventory.

  7. On the Retail FastTab, enter any additional information that is required for the product kit. This information includes configuration data for any product variants that are included in the kit.

5. Define kit pricing and generate trade agreements

You can price product kits as a whole product or as a sum of the individual components. The base price for each kit component is the price of the product at the time that it was added to the product kit.

If you define a price for the overall kit, the new price is distributed across all the products in the kit. The price adjustment to each product is based on the percentage that each product’s base price contributes to the total base price for the product kit. You can also specify whether there is an additional charge for product substitutes when the customer selects the product substitute instead of the base component. The additional cost is included when the kit price is calculated.

  1. Click Retail > Common > Kits > Released product kits. On the Released product kits list page, double-click a released product kit in the list.

  2. In the Released product details form, click Edit. Then, on the Action Pane, on the Product tab, click Configure.

  3. In the Configure kit form, on the Kit components FastTab, in the Components grid, follow one of these steps:

    • In the Kit price column, enter the kit price for each component in the product kit.

    • Click Specify kit price to enter a price for the overall product kit.

  4. On the Kit components FastTab, in the Substitution grid, in the Charge field, enter the amount to add to the kit price if the substitute product is selected to replace the base product component. Repeat this step for each substitute product in the grid.

    For example, a customer selects a kit that includes a standard bicycle tire set, but the customer wants to upgrade to a premium bicycle tire set. If the cost to upgrade the tire set is 50.00 USD, enter 50.00 in the Charge field.

  5. Repeat steps 3 and 4 for each component and component substitute that is included in the product kit.

    Note

    If you select an overall kit price for the base components in the product kit, you only have to follow step 3 one time.

Next step

After you set up the kit and define your kit configuration, the next steps are to generate the assembly orders and assemble the orders. For more information, see Create and view kit assembly and disassembly orders and Process kit assembly and disassembly orders.

About setting up retail product kits

Technical information for system administrators

If you don't have access to the pages that are used to complete this task, contact your system administrator and provide the information that is shown in the following table.

Category

Prerequisite

Configuration keys

Retail

Security roles

Merchandising manager