Set up a load template [AX 2012]

Updated: February 20, 2014

Applies To: Microsoft Dynamics AX 2012 R3

NoteNote

This topic applies to features in the Transportation management module. It does not apply to features in the Inventory management module.

When you create a new load, you can assign a load template that contains information about equipment and measures such as height, width, depth, and volume of the load.

This topic describes how to set up load templates and how to associate a load template with a new load.

To set up load templates, follow these steps:

  1. Click Transportation management > Setup > General > Load template.

  2. In the Load template ID field, enter a unique identifier (ID) for the load template.

  3. In the Equipment field, select the equipment to use for shipping the load.

  4. In the Load height, Load width, and Load depth fields, enter the dimensions of the load.

  5. In the Max. allowed load volume and Max. allowed load weight fields, enter the maximum allowed volume and weight of the load.

  6. In the Maximum allowed gross weight field, enter the maximum allowed gross weight of the load. The load’s gross weight includes both its tare weight and its loading weight.

  7. In the Maximum number of freight pieces allowed field, enter the maximum number of freight pieces that the load can contain.

  8. Select the Stack load on floor check box if you want to use floor loading. In a floor loading scenario, boxes are stacked floor-to-ceiling, wall-to-wall inside the container to maximize the inside capacity.

To associate a load template with a new load, follow these steps:

  1. Click Transportation management > Inquiries > Load planning workbench.

  2. Click To new load.

  3. In the Load template ID field, select a template.

If you don't have access to the pages that are used to complete this task, contact your system administrator and provide the information that is shown in the following table.

Category

Prerequisite

Configuration key

Click System administration > Setup > Licensing > License configuration. Expand the Trade license key, and select the Warehouse and Transportation management configuration key.


Announcements: To see known issues and recent fixes, use Issue search in Microsoft Dynamics Lifecycle Services (LCS).

Community Additions

ADD
Show: