Palette Tests
[This documentation is preliminary and is subject to change.]
This manual test ensures that the DirectDraw graphics adapter verifies palette manipulation.
This test is partially automated, but does require some manual verification:
PAL_GetEntries/SetEntries (8-Bit)(TC 4.5.7, 4.7.7)
PAL_CreatePalette - ALLOW256 Test(TC 2.6.12)
PAL_CreatePalette - Init 256 clrs(TC 2.6.9)
This topic applies to the following test jobs:
Palette Tests
Palette Tests (WoW64)
Test details
Specifications |
|
Platforms |
|
Expected run time (in seconds) | 600 |
Category | Compatibility |
Timeout (in seconds) | 600 |
Requires reboot | false |
Requires special configuration | false |
Type | automatic |
Additional documentation
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic:
Running the test
Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.In addition, this test requires the following software and hardware:Microsoft® DirectX® version 7.0 or laterDisplay adapter with DDraw capabilities
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.
For troubleshooting information, see Troubleshooting Device.Graphics Testing.Turn off the screen saver and disable the power management before you run this test. Mode changes and full-screen applications can cause failures, so you should avoid them.
More information
Most of the Microsoft DirectDraw tests (including the Blt - Exotic test) are located in Fnddraw.exe. You can run Fnddraw.exe outside of the DCT shell, and select initial tests. On the Tests menu, click Select Tests.
The test titles that are listed in the DCT shell do not directly match the test names in Fnddraw.exe. In fact, the names in the DCT often refer to a group of Fnddraw tests. You can obtain the Fnddraw test case names from the DCT log file.
You can pause many Fnddraw tests (especially blt-related tests) to give you time to visually analyze the blt results. Use the <Pause> key to pause and resume.
Use the <ESC> key to abort a test run. Be patient because some tests are more responsive than others.
Command Syntax
Command option | Description |
---|---|
Fnddraw dd_txblt.pro -r -c -p"m%MONITOR%" |
Runs the test. Replace the %MONITOR% parameter with a 1-based index that corresponds to the display that you are testing. |
File List
File | Location |
---|---|
Configdisplay.exe |
<[testbinroot]>\nttest\windowstest\tools\ |
DD_pal.pro |
<[testbinroot]>\nttest\multimediatest\video\ddraw\pro |
Fnddraw.exe |
<[testbinroot]>\nttest\multimediatest\video\ddraw |
Fnswtt.dll |
<[testbinroot]>\nttest\multimediatest\video\ddraw |
TDRWatch.exe |
<[testbinroot]>\nttest\windowstest\graphics\ |
Note
You do not need Fnswtt.dll to run this test. It is used only for Windows HCK logging.
Parameters
Parameter name | Parameter description |
---|---|
LLU_NetAccessOnly | LLU Name of net user |
MONITOR | Index of display output to target with test |
ConfigDisplayCommandLine | Custom Command Line for ConfigDisplay. Default: logo |
TDRArgs | /get or /set |
WDKDeviceID | Device id of DUT |