Set-MoveRequest

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-MoveRequest cmdlet to change move request options after the move request has been created. You can use the Set-MoveRequest cmdlet to recover from failed move requests.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-MoveRequest
   [-Identity] <MoveRequestIdParameter>
   [-AcceptLargeDataLoss]
   [-ArchiveTargetDatabase <DatabaseIdParameter>]
   [-BadItemLimit <Unlimited>]
   [-BatchName <String>]
   [-CompleteAfter <DateTime>]
   [-CompletedRequestAgeLimit <Unlimited>]
   [-Confirm]
   [-DomainController <Fqdn>]
   [-IgnoreRuleLimitErrors <Boolean>]
   [-IncrementalSyncInterval <TimeSpan>]
   [-InternalFlags <InternalMrsFlag[]>]
   [-LargeItemLimit <Unlimited>]
   [-MoveOptions <MultiValuedProperty>]
   [-PreventCompletion <Boolean>]
   [-Priority <RequestPriority>]
   [-Protect <Boolean>]
   [-ProxyToMailbox <MailboxIdParameter>]
   [-RemoteCredential <PSCredential>]
   [-RemoteGlobalCatalog <Fqdn>]
   [-RemoteHostName <Fqdn>]
   [-RequestExpiryInterval <Unlimited>]
   [-SkipMoving <SkippableMoveComponent[]>]
   [-SkippedItemApprovalTime <DateTime>]
   [-StartAfter <DateTime>]
   [-SuspendWhenReadyToComplete <Boolean>]
   [-TargetDatabase <DatabaseIdParameter>]
   [-WhatIf]
   [<CommonParameters>]

Description

You can pipeline the Set-MoveRequest cmdlet from the Get-MoveRequestStatistics, Get-MoveRequest, or Get-Mailbox cmdlets.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-MoveRequest -Identity Ayla@humongousinsurance.com -BadItemLimit 5

This example changes the move request for Ayla to accept up to five corrupt mailbox items.

Example 2

Set-MoveRequest -Identity Sruthi@contoso.com -SkippedItemApprovalTime $(Get-Date).ToUniversalTime()

This example changes the move request for Sruthi to approve all skipped items encountered before the current time.

Parameters

-AcceptLargeDataLoss

The AcceptLargeDataLoss switch specifies the request should continue even if a large number of items in the source mailbox can't be copied to the target mailbox. You don't need to specify a value with this switch.

In Exchange 2013 or later or Exchange Online, you need to use this switch if you set the LargeItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.

In Exchange 2010, you need to use this switch if you set the BadItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ArchiveTargetDatabase

This parameter is available only in on-premises Exchange.

The ArchiveTargetDatabase parameter specifies the target mailbox database for the personal archive. You can use any value that uniquely identifies the database. For example:

  • Name
  • Distinguished name (DN)
  • GUID

You can use this parameter to change the target database only if the move request has a MoveStatus value of Queued.

Type:DatabaseIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-BadItemLimit

The BadItemLimit parameter specifies the maximum number of bad items that are allowed before the request fails. A bad item is a corrupt item in the source mailbox that can't be copied to the target mailbox. Also included in the bad item limit are missing items. Missing items are items in the source mailbox that can't be found in the target mailbox when the request is ready to complete.

Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the request again.

In Exchange 2010, if you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.

Note: This parameter is being deprecated in the cloud-based service. In the future, if you don't use this parameter, Skipped Item approval semantics will be used instead.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-BatchName

The BatchName parameter specifies a different name for a batch.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CompleteAfter

The CompleteAfter parameter specifies a delay before the request is completed. The request is started, but not completed until the date/time you specify with this parameter.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

In Exchange Online PowerShell, if you specify a date/time value without a time zone, the value is in Coordinated Universal Time (UTC).

To specify a date/time value for this parameter, use either of the following options:

  • Specify the date/time value in UTC: For example, "2021-05-06 14:30:00z".
  • Specify the date/time value as a formula that converts the date/time in your local time zone to UTC: For example, (Get-Date "5/6/2021 9:30 AM").ToUniversalTime(). For more information, see Get-Date.
Type:DateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-CompletedRequestAgeLimit

The CompletedRequestAgeLimit parameter specifies how long the request is kept after it has completed before being automatically removed. The default CompletedRequestAgeLimit parameter value is 30 days.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the identity of the mailbox or mail user. You can use the following values:

  • GUID
  • Distinguished name (DN)
  • Domain\Account
  • User principal name (UPN)
  • LegacyExchangeDN
  • SMTP address
  • Alias
Type:MoveRequestIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-IgnoreRuleLimitErrors

The IgnoreRuleLimitErrors parameter specifies that the command won't move the user's rules to the target server running Microsoft Exchange.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013

-IncrementalSyncInterval

The IncrementalSyncInterval parameter specifies the wait time between incremental syncs. This parameter is used together with the CompleteAfter parameter to create a move request that will do periodic incremental syncs after the initial sync is complete.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Valid values are from 00:00:00 to 120.00:00:00 (120 days). The default value is 24 hours.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-InternalFlags

This parameter is available only in on-premises Exchange.

The InternalFlags parameter specifies the optional steps in the request. This parameter is used primarily for debugging purposes.

Type:InternalMrsFlag[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-LargeItemLimit

The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.

For more information about maximum message size values, see the following topics:

Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed.

If you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.

Note: This parameter is being deprecated in the cloud-based service. In the future, if you don't use this parameter, Skipped Item approval semantics will be used instead.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MoveOptions

The MoveOptions parameter specifies the stages of the move that you want to skip for debugging purposes. Don't use this parameter unless you're directed to do so by Microsoft Customer Service and Support or specific documentation.

Don't use this parameter with the SkipMoving parameter.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-PreventCompletion

The PreventCompletion parameter specifies whether to run the move request, but not allow it to complete. Valid values are:

  • $true: The move request is run, but is not allowed to complete. Instead of this value, we recommend using the CompleteAfter parameter.
  • $false: This is the default value. The move request is run and allowed to complete. If you created the move request with the SuspendWhenReadyToComplete or PreventCompletion switches, set this parameter to $false before you run the Resume-MoveRequest cmdlet to complete the move request.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Priority

This parameter is available only in on-premises Exchange.

The Priority parameter specifies the order in which the request should be processed in the request queue. Requests are processed in order, based on server health, status, priority, and last update time. Valid priority values are:

  • Lowest
  • Lower
  • Low
  • Normal: This is the default value.
  • High
  • Higher
  • Highest
  • Emergency
Type:RequestPriority
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Protect

This parameter is available only in on-premises Exchange.

This parameter is reserved for internal Microsoft use.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ProxyToMailbox

This parameter is available only in the cloud-based service.

The ProxyToMailbox parameter specifies the move destination by the location of the specified mailbox (also known as proxying). You can use any value that uniquely identifies the mailbox. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)
Type:MailboxIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-RemoteCredential

The RemoteCredential parameter specifies the username and password an administrator who has permission to perform the mailbox move.

A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.

Type:PSCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RemoteGlobalCatalog

The RemoteGlobalCatalog parameter specifies the FQDN of the global catalog server for the remote forest.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RemoteHostName

The RemoteHostName parameter specifies the FQDN of the cross-forest organization from which you're moving the mailbox.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequestExpiryInterval

The RequestExpiryInterval parameter specifies an age limit for a completed or failed request. When you use this parameter, the completed or failed request is automatically removed after the specified interval expires. If you don't use this parameter:

  • The completed request is automatically removed based on the CompletedRequestAgeLimit parameter value.
  • If the request fails, you need to manually remove it by using the corresponding Remove-*Request cmdlet.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

When you use the value Unlimited, the completed request isn't automatically removed.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-SkipMoving

This parameter has been replaced by the MoveOptions parameter.

The SkipMoving parameter specifies the stages of the move that you want to skip for debugging purposes. Don't use this parameter unless you're directed to do so by Microsoft Customer Service and Support or specific documentation.

Type:SkippableMoveComponent[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SkippedItemApprovalTime

This parameter is available only in the cloud-based service.

The SkippedItemApprovalTime parameter marks all of the skipped items discovered prior to the specified time as approved. If the data loss that was detected during this migration is significant, the migration will not be able to complete without approving skipped items. Items may have been skipped because they are corrupted in the source mailbox and can't be copied to the target mailbox, they are larger than the max allowable message size configured for the tenant, or they were detected as missing from the target mailbox when the migration is ready to complete.

For more information about maximum message size values, see the following topic Exchange Online Limits.

To specify a date/time value for this parameter, use either of the following options:

  • Specify the date/time value in UTC: For example, "2021-05-06 14:30:00z".
  • Specify the date/time value as a formula that converts the date/time in your local time zone to UTC: For example, (Get-Date "5/6/2021 9:30 AM").ToUniversalTime(). For more information, see Get-Date.
Type:DateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-StartAfter

The StartAfter parameter specifies a delay before the request is started. The request isn't started until the date/time you specify with this parameter.

Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format mm/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".

In Exchange Online PowerShell, if you specify a date/time value without a time zone, the value is in Coordinated Universal Time (UTC).

To specify a date/time value for this parameter, use either of the following options:

  • Specify the date/time value in UTC: For example, "2021-05-06 14:30:00z".
  • Specify the date/time value as a formula that converts the date/time in your local time zone to UTC: For example, (Get-Date "5/6/2021 9:30 AM").ToUniversalTime(). For more information, see Get-Date.
Type:DateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-SuspendWhenReadyToComplete

The SuspendWhenReadyToComplete parameter specifies whether to suspend the move request before it reaches the status of CompletionInProgress. Instead of this parameter, we recommend using CompleteAfter parameter.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-TargetDatabase

This parameter is available only in on-premises Exchange.

The TargetDatabase parameter specifies the target mailbox database for the mailbox. You can use any value that uniquely identifies the database. For example:

  • Name
  • Distinguished name (DN)
  • GUID

You can use this parameter to change the target database only if the move request has a MoveStatus value of Queued.

Type:DatabaseIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.