Getting Started with Always On Availability Groups (SQL Server)
Published: May 13, 2016
Updated: May 17, 2016
Applies To: SQL Server 2016
This topic introduces the steps for configuring instances of [!INCLUDE[ssCurrent](../Token/ssCurrent_md.md)] to support [!INCLUDE[ssHADR](../Token/ssHADR_md.md)] and for creating, managing, and monitoring an availability group.
Before You Begin:
Getting started with:
Before you create your first availability group, we recommend that you read the following topics:
|Enable Always On Availability Groups. The Always On Availability Groups feature must be enabled on every instance of SQL Server 2016 that is to participate in an availability group.|
Prerequisites: The host computer must be a Windows Server Failover Clustering (WSFC) node.
For information about the other prerequisites, see "SQL Server Instance Prerequisites and Restrictions" in Prerequisites, Restrictions, and Recommendations for Always On Availability Groups (SQL Server).
|Enable and disable Always On Availability Groups|
|Create database mirroring endpoint (if none). Ensure that each server instance possesses a database mirroring endpoint. The server instance uses this endpoint to receive Always On Availability Groups connections from other server instances.||To determine whether database mirroring endpoint exists: |
For Windows Authentication. To create a database mirroring endpoint, using:
New Availability Group Wizard
SQL Server PowerShell
For certificate authentication. To create a database mirroring endpoint, using:Transact-SQL
|Create the availability group. Create the availability group on the instance of SQL Server that hosts the databases to be added to the availability group.|
Minimally, create the initial primary replica on the instance of SQL Server where you create the availability group. You can specify from one to four secondary replicas. For information about availability group and replica properties, see CREATE AVAILABILITY GROUP (Transact-SQL).
We strongly recommend that you create an availability group listener.
Prerequisites: The instances of SQL Server that host availability replicas for a given availability group must reside on separate nodes of a single WSFC cluster. The only exception is that while being migrated to another WSFC cluster, an availability group can temporarily straddle two clusters.
For information about the other prerequisites, see "Availability Group Prerequisites and Restrictions", "Availability Database Prerequisites and Restrictions", and "SQL Server Instance Prerequisites and Restrictions" in Prerequisites, Restrictions, and Recommendations for Always On Availability Groups (SQL Server).
|To create an availability group you can use any of the following tools:|
New Availability Group Wizard
SQL Server PowerShell
|Join secondary replicas to the availability group. Connect to each instance of SQL Server 2016 that is hosting a secondary replica, and join the local secondary replica to the availability group.||Join a secondary replica to an availability group|
Tip: If you use the New Availability Group Wizard, this step is automated.
|Prepare secondary databases. On every server instance that is hosting a secondary replica, restore backups of the primary databases using RESTORE WITH NORECOVERY.||Manually prepare a secondary database|
Tip: The New Availability Group Wizard can prepare the secondary databases for you. For more information, see "Prerequisites for using full initial data synchronization" in Select Initial Data Synchronization Page (Always On Availability Group Wizards).
|Join secondary databases to the availability group. On every server instance that is hosting a secondary replica, join each local secondary database to the availability group. On joining the availability group, a given secondary database initiates data synchronization with the corresponding primary database.||Join a secondary database to an availability group|
Tip: The New Availability Group Wizard can perform this step if every secondary database exists on every secondary replica.
|Create an availability group listener. This step is necessary unless you already created the availability group listener while creating the availability group.||Create or Configure an Availability Group Listener (SQL Server)|
|Give the listener's DNS host name to application developers. Developers needs to specify this DNS name in the connection strings to direct connection requests to the availability group listener. For more information, see Availability Group Listeners, Client Connectivity, and Application Failover (SQL Server).||"Follow Up: After Creating an Availability Group Listener" in Create or Configure an Availability Group Listener (SQL Server)|
|Configure Where Backup Jobs. If you want to perform backups on secondary databases, you must create a backup job script that takes the automated backup preference into account. Create a script for each database in the availability group on every server instance that hosts an availability replica for the availability group.||"Follow Up: After Configuring Backup on Secondary Replicas" in Configure Backup on Availability Replicas (SQL Server)|
Managing existing availability groups involves one or more of the following tasks:
|Modify the flexible failover policy of the availability group to control the conditions that cause an automatic failover. This policy is relevant only when automatic failover is possible.||Configure the flexible failover policy of an availability group|
|Perform a planned manual failover or a forced manual failover (with possible data loss), typically called forced failover. For more information, see Failover and Failover Modes (Always On Availability Groups).||Perform a planned manual failover|
Perform a forced manual failover
|Use a set of predefined policies to view the health of an availability group and its replicas and databases.||Use policy-based management to view the health of availability groups|
Use the Always On Group Dashboard
|Add or remove a secondary replica.||Add a secondary replica|
Remove a secondary replica
|Suspend or resume an availability database. Suspending a secondary database keeps at its current point in time until you resume it.||Suspend a database|
Resume a database
|Add or remove a database.||Add a database|
Remove a secondary database
Remove a primary database
|Reconfigure or create an availability group listener.||Create or configure an availability group listener|
|Delete an availability group.||Delete an availability group|
|Troubleshoot add file operations. This might be required if the primary database and a secondary database have different file paths.||Troubleshoot a failed add-file operation|
|Alter availability replica properties.||Change the Availability Mode|
Change the Failover Mode
Configure Backup Priority (and Automated Backup Preference)
Configure Read-Only Access
Configure Read-Only Routing
Change the Session-Timeout Period
To monitor the properties and state of an Always On availability group you can use the following tools.
|System Center Monitoring pack for SQL Server||The Monitoring pack for SQL Server (SQLMP) is the recommended solution for monitoring availability groups, availability replica and availability databases for IT administrators. Monitoring features that are particularly relevance to Always On Availability Groups include the following:|
Automatic discoverability of availability groups, availability replicas, and availability database from among hundreds of computers. This enables you to easily keep track of your Always On Availability Groups inventory.
Fully capable System Center Operations Manager (SCOM) alerting and ticketing. These features provide detailed knowledge that enables faster resolution to a problem.
A custom extension to Always On Health monitoring using Policy Based management (PBM).
Health roll ups from availability databases to availability replicas.
Custom tasks that manage Always On Availability Groups from the System Center Operations Manager console.
|To download the monitoring pack (SQLServerMP.msi) and SQL Server Management Pack Guide for System Center Operations Manager (SQLServerMPGuide.doc), see:|
System Center Monitoring pack for SQL Server
|Transact-SQL||Always On Availability Groups catalog and dynamic management views provide a wealth of information about your availability groups and their replicas, databases, listeners, and WSFC cluster environment.||Monitor Availability Groups (Transact-SQL)|
|SQL Server Management Studio||The Object Explorer Details pane displays basic information about the availability groups hosted on the instance of SQL Server to which you are connected.|
Tip: Use this pane to select multiple availability groups, replicas, or databases and to perform routine administrative tasks on the selected objects; for example, removing multiple availability replicas or databases from an availability group.
|Use Object Explorer Details to monitor availability groups|
|SQL Server Management Studio||Properties dialog boxes enable you to view the properties of availability groups, replicas, or listeners and, in some cases, to change their values.||Availability Group Properties|
Availability Replica Properties
Availability Group Listener Properties
|System Monitor||The SQLServer:Availability Replica performance object contains performance counters that report information about availability replicas.||SQL Server, Availability Replica|
|System Monitor||The SQLServer:Database Replica performance object contains performance counters that report information about the secondary databases on a given secondary replica.|
The SQLServer:Databases object in SQL Server contains performance counters that monitor transaction log activities, among other things. The following counters are particularly relevant for monitoring transaction-log activity on availability databases: Log Flush Write Time (ms), Log Flushes/sec, Log Pool Cache Misses/sec, Log Pool Disk Reads/sec, and Log Pool Requests/sec.
|SQL Server, Database Replica|
SQL Server, Databases Object
Video—Introduction to Always On: Microsoft SQL Server Code-Named "Denali" Always On Series,Part 1: Introducing the Next Generation High Availability Solution
Video—A Deep Dive into Always On: Microsoft SQL Server Code-Named "Denali" Always On Series,Part 2: Building a Mission-Critical High Availability Solution Using Always On
Always On Availability Groups (SQL Server)
Overview of Always On Availability Groups (SQL Server)
Configuration of a Server Instance for Always On Availability Groups (SQL Server)
Creation and Configuration of Availability Groups (SQL Server)
Monitoring of Availability Groups (SQL Server)
Overview of Transact-SQL Statements for Always On Availability Groups (SQL Server)
Overview of PowerShell Cmdlets for Always On Availability Groups (SQL Server)