Step 6: Configure CLIENT2

  • Article

CLIENT2 configuration for the Forefront Identity Manager 2010 Certificate Management User Smart Card Self-Service test lab consists of the following:

  • Install Windows 7 Professional x64 on CLIENT2

  • Join CLIENT2 to the CORP domain

  • Install the USB Smart Card Reader

  • Install the Gemalto Mini-driver for Windows 7 Professional

  • Install Office Professional Plus 2010 on CLIENT2

  • Install the x86 FIM CM Client on CLIENT2

  • Install the x86 FIM CM Client Update 1

Install Windows 7 Professional x64 on CLIENT2

Install the Windows 7 Professional operating system on CLIENT2.

To install Windows 7 Professional x64 on CLIENT2

  1. Start the installation of Windows 7 Professional x64.

  2. Follow the instructions to complete the installation, specifying CLIENT2 as the PC name and a strong password for the local Administrator account.

  3. Once the installation completes, log on using the local Administrator account.

  4. Connect CLIENT2 to a network that has Internet access and run Windows Update to install the latest updates for Windows 7 Professional.

  5. Once the updates are complete, restart CLIENT2 and log on as the local Administrator.

Join CLIENT2 to the CORP domain

Now join CLIENT2 to the corp.contoso.com domain.

To join CLIENT2 to the CORP domain

  1. Click Start, right-click Computer, and then click Properties.

  2. On the System page, under Computer name, domain, and workgroup settings click Change Settings.

    Join the Domain

  3. In the System Properties dialog box, on the Computer name tab, click Change.

  4. Under Member of, select Domain, and enter corp.contoso.com in the box. Click OK.

  5. When you are prompted for a user name and password, type the user name and password for the User1 account, and then click OK.

    Note

    You can also use the CORP\Administrator account to join CLIENT2 to the domain.

  6. When you see a dialog box welcoming you to the corp.contoso.com domain, click OK.

  7. When you are prompted that you must restart the computer, click OK.

  8. On the System Properties dialog box, click Close.

  9. When you are prompted to restart the computer, click Restart Now.

  10. After the computer restarts, click Switch User, and then click Other User and log on to the CORP domain with the Administrator account.

Install the USB Smart Card Reader

Install the USB Smart Card Reader on CLIENT2.

To Install the USB Smart Card Reader on CLIENT2

  1. Navigate to the directory that contains the GemPcCCID_201_en-us_64.exe and begin the installation.

  2. Follow the instructions to complete the installation.

  3. Once the installation completes click Finish.

  4. Now plug the USB smart card reader into CLIENT2.

  5. Windows 7 will automatically detect the USB smart card reader and install the driver.

Install the Gemalto Minidriver for Windows 7 Professional

Now install the Gemalto Minidriver for Windows 7 Professional.

To Install the Gemalto Minidriver for Windows 7 Professional

  1. Navigate to the directory that contains the AMD64_X86-ar_bg_zh-tw_cs_da_de_el_en_es_fi_fr_he_hu_it_ko_nl_n...br_ro_ru_hr_sk_sv_th_tr_sl_et_lv_lt_zh-cn_pt_ja-nec-20395701_92604914396b1e89d0c78b2fad2f05fe80754d66 .cab file and double-click it.

  2. This will open the cab file and there will be four files present. Highlight all four files and at the top select Extract.

    Install Minidriver

  3. In the Select a Destination dialog box, navigate to the C:\ drive and click Make new folder.

  4. Rename the folder Gemalto Minidriver and click Extract.

  5. Now insert a smart card into the smart card reader. This will bring up a window that says installing driver. Then it will say Device driver software was not successfully installed.

  6. Click Start and select Devices and Printers. This will bring up Devices and Printers.

    Install Minidriver

  7. You will see Smart Card with a yellow triangle on it. Double-click on the smart card. This will bring up the Smart Card Properties. At the top, click the Hardware tab.

    Install Minidriver

  8. On the Hardware tab, click the Properties button. This will bring up Smart Card Properties.

    Install Minidriver

  9. On the General tab click Update Driver. This will bring up the Update Driver Software – Smart Card dialog box.

  10. On the Update Driver Software – Smart Card dialog box, click on Browse my computer for driver software. This will bring up the Browse for driver software on your computer dialog box. Click Browse.

    Install Minidriver

  11. Navigate to the newly created folder C:\Gemalto Minidriver and click OK.

  12. On the Browse for driver software on your computer click Next.

  13. This will install the driver successfully. When it is finished click Close.

    Install Minidriver

  14. On the Gemalto Minidriver for .NET Smart Card Properties click Close.

  15. On the Smart Card Properties click OK.

Install Office Professional Plus 2010 on CLIENT2

To install Office Professional Plus 2010 on CLIENT2

  1. Log on to CLIENT2.corp.contoso.com as Administrator.

  2. Navigate to the directory that contains the Office Professional Plus 2010 binaries and double-click Setup.EXE. This will launch Office Professional Plus 2010.

  3. On the Enter your Product Key screen, enter your Office Professional Plus 2010 product key and click Continue.

  4. On the Read the Microsoft Software License Terms screen, read the agreement. Once you are finished with the agreement place a check in the box next to I accept the terms of this agreement and click Continue.

    On the Choose the installation you want screen, click Install Now.

  5. Once the installation completes, click Close.

  6. Log off CLIENT2.corp.contoso.com.

Install the x86 FIM CM Client on CLIENT2

Now install the x86 FIM CM Client on CLIENT2.

Install the x86 FIM CM Client on CLIENT2

  1. Navigate to the directory that contains the Forefront Identity Manager 2010 binaries. Navigate to the CM Client\x86 and double-click setup.

  2. On the Welcome page, click Next.

  3. On the End User License Agreement page, read the License Agreement, select I accept the terms in the license agreement, and then click Next.

  4. On the Custom Setup page, click Next.

  5. On the Configure CM Client page, in the box provided, enter fimcm1 and click Next.

    Install the FIM CM client

  6. On the Install Forefront Identity Manager Certificate Management Client page, click Install.

  7. Once the installation completes, click Finish.

Install the x86 FIM CM Client Update 1

Install the FIM CM Update 1 binaries on FIMCM1.

To install the x86 FIM CM Client Update 1

  1. Navigate to the directory that contains the binaries for Forefront Identity Manager 2010 Synchronization Service Update (KB978864) and double-click X86-all-fimcmclient_kb978864_f59b3d60073691225cc524ed6fe33254c08c14bbe.cab.

  2. This will open the cab file and there will be one file present. Highlight this file and at the top select Extract.

  3. In the Select a Destination dialog box, navigate to the C:\ drive and click Make new folder.

  4. Rename the folder FIM CM Client Update1 and click Extract.

  5. Navigate to the newly created folder C:\ FIM CM Client Update1 and double-click FIMCMClient_KB978864.msp. This will begin the update.

  6. On the Welcome page, click Update. This will begin the update.

    Install the FIM CM client Update 1

  7. Once the installation completes, click Finish.