Set-NetTCPSetting

ps_cimcommon_asjob

Modifies the AutoTuningLevelLocal property. TCP auto-tuning improves throughput on high throughput, high latency networks. This parameter value determines the setting of the TCP auto-tuning level that is locally configured. The acceptable values for this parameter are:

-- Disabled: Sets the TCP receive window at the default value.

-- HighlyRestricted: Sets TCP to allow the receive window to grow beyond the default value, but does so very conservatively.

-- Restricted: Sets TCP to allow the receive window to grow beyond the default value, but does so less conservatively.

-- Normal: Sets TCP to allow the receive window to grow to accommodate almost all scenarios.

-- Experimental: Sets TCP to allow the receive window to grow to accommodate extreme scenarios.

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Prompts you for confirmation before running the cmdlet.

Modifies the CongestionProvider property used by TCP. The acceptable values for this parameter are:

-- Default: Sets the TCP stack to its default setting. Servers use DCTCP by default. Clients use NewReno as defined in RFC 3782http://www.ietf.org/rfc/rfc3782.txt.

-- CTCP: Sets the TCP stack to use Compound TCP, which increases the receive window and amount of data sent. This may improve throughput on higher latency connections.

-- DCTCP: Sets the TCP stack to use Datacenter TCP, which adjusts the TCP window size based on network congestion feedback based on ECN signaling. This may improve throughput on low latency links.

Specifies the enabled state of the cwnd restart. This parameter value determines whether congestion window is restarted and can avoid slow start to optimize throughput on low latency networks. This is described in RFC 2581http://go.microsoft.com/fwlink/p/?LinkId=95127.

-- False: Sets the TCP stack to use its default setting.

-- True: Sets the TCP stack to use cwnd restart.

Modifies the DelayedAckTimeoutMs property. This parameter value controls the timeout, in milliseconds, for sending an ACK when less than delackfrequency packets are received. Reducing this time will potentially benefit throughput on low latency networks by accelerating growth in TCP window size. The acceptable values for this parameter are: 10 through 600 milliseconds. This parameter must be specified in increments of 10 milliseconds.

Modifies the DynamicPortRangeNumberOfPorts property. This parameter value specifies the number of ports for the dynamic port range starting from the DynamicPortRangeStartPort parameter.

Modifies the DynamicPortRangeStartPort property. This parameter value specifies the starting port to send TCP traffic. The acceptable values for this parameter are: 1 through 65535.

Specifies the enabled state of the ECN capability. If the NetIPInterface setting of ECNMarking is disabled or has a static setting configured to UseECT0 or UseEct1, then this setting will not have an effect. The acceptable values for this parameter are:

-- Enabled: The TCP setting can use the ECN Capability.

-- Disabled: The TCP setting cannot use the ECN Capability.

Modifies the InitialCongestionWindowMss property. This parameter value determines the initial congestion window in Maximum Segment Size (MSS). The acceptable values for this parameter are: 2 through 64 MSS. This parameter value must be an even number.

Modifies the InitialRtoMs property. This parameter value determines the connect (SYN) retransmit timeout, in milliseconds. The acceptable values for this parameter are: 300 through 3000 milliseconds. This parameter must be specified in increments of 10 milliseconds.

The default value is 3000.

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Modifies the MemoryPressureProtection property. TCP memory pressure protection ensures the computer can continue normal operation when in low on memory due to DoS attacks. When enabled, in low memory, and a DoS attack is in progress, this parameter value will kill the existing TCP connections and drop incoming SYN requests. Enabled by default on servers and Disabled by default on clients. The acceptable values for this parameter are:

-- Disabled: Turns off TCP memory pressure protection.

-- Enabled: Turns on TCP memory pressure protection.

-- Default: Restores the TCP memory pressure protection property to computer defaults.

Modifies the MinRtoMs property. This parameter value determines the TCP retransmission timeout, in milliseconds. The acceptable values for this parameter are: 20 through 300 milliseconds. This parameter must be specified in increments of 10 milliseconds.

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Specifies the enabled state of the scaling heuristics setting. The acceptable values for this parameter are:

-- Disabled: The TCP setting cannot use scaling heuristics.

-- Enabled: The TCP setting uses scaling heuristics.

Specifies TCP setting information for a specific setting name. The only setting name that may be defined by an administrator is Custom.

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Specifies the enabled state of the RFC 1323http://www.ietf.org/rfc/rfc1323.txt TCP timestamps. RFC 1323http://go.microsoft.com/fwlink/p/?LinkId=84406 timestamps can help with round trip measurement and protection against wrapped sequence numbers on high throughput links. The acceptable values for this parameter are:

-- Disabled: The TCP setting does not use the RFC 1323http://go.microsoft.com/fwlink/p/?LinkId=84406 timestamps. This is the default.

-- Enabled: The TCP setting uses the RFC 1323http://go.microsoft.com/fwlink/p/?LinkId=84406 timestamps.

Shows what would happen if the cmdlet runs. The cmdlet is not run.