Set-NetIPv6Protocol

Modifies information about the IPv6 Protocol configuration.

Syntax

Set-NetIPv6Protocol
   [-AddressMaskReply <AddressMaskReply>]
   [-AsJob]
   [-CimSession <CimSession[]>]
   [-DefaultHopLimit <UInt32>]
   [-DhcpMediaSense <DhcpMediaSense>]
   [-GroupForwardedFragments <GroupForwardedFragments>]
   [-IcmpRedirects <IcmpRedirects>]
   [-InputObject <CimInstance[]>]
   [-MaxDadAttempts <UInt32>]
   [-MaxPreferredLifetime <TimeSpan>]
   [-MaxRandomTime <TimeSpan>]
   [-MaxValidLifetime <TimeSpan>]
   [-MediaSenseEventLog <MediaSenseEventLog>]
   [-MldLevel <MldLevel>]
   [-MldVersion <MldVersion>]
   [-MulticastForwarding <MulticastForwarding>]
   [-NeighborCacheLimitEntries <UInt32>]
   [-PassThru]
   [-RandomizeIdentifiers <RandomizeIdentifiers>]
   [-ReassemblyLimitBytes <UInt32>]
   [-RegenerateTime <TimeSpan>]
   [-RouteCacheLimitEntries <UInt32>]
   [-SourceRoutingBehavior <SourceRoutingBehavior>]
   [-ThrottleLimit <Int32>]
   [-UseTemporaryAddresses <UseTemporaryAddresses>]
   [-Confirm]
   [-WhatIf]

Description

The Set-NetIPv6Protocol cmdlet modifies the global IPv6 protocol configuration for the computer. This includes parameters such as the default hop limit, the neighbor cache limit, and multi-cast configuration.

Examples

EXAMPLE 1

PS C:\>Set-NetIPv6Protocol -MediaSenseEventLog Enabled

This example enabled the DHCP media sense event log.

EXAMPLE 2

PS C:\>Get-NetIPv6Protocol -NeighborCacheLimit 1000

This example allows for more neighbors on the subnet, as the default is 256.

Parameters

-AddressMaskReply

Modifies the AddressMaskReply property. The acceptable values for this parameter are:

-- Enabled: The computer will respond to ICMP Address mask packets.

-- Disabled: The computer will not respond to ICMP Address mask packets.

Type:AddressMaskReply
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AsJob

ps_cimcommon_asjob

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefaultHopLimit

Modifies the default hop limit. This parameter value sets the default value for the CurrentHopLimit property in NetIPInterface. The CurrentHopLimit is the value that the IP interface writes in the hop limit field in all outbound IPv6 traffic. When forwarding a packet, routers are required to decrease the Hop Limit by 1 and to discard the packet when the Hop Limit is 0.

The default value is 128.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DhcpMediaSense

Modifies the DHCPMediaSense property. This parameter value provides a mechanism for the network adapter to notify the protocol stack of media connect and disconnect events. These events trigger the DHCP client to take some action, such as attempting to renew a DHCP lease or removing routes related to a disconnected network. One application of Media Sense enables the network parameters on the notebook computer of a roaming user to automatically and transparently update without rebooting when the user moves from one location to another. The acceptable values for this parameter are:

-- Enabled: DhcpMediaSense set to Enabled.

-- Disabled: DhcpMediaSense is set to Disabled.

The default value is Enabled.

Type:DhcpMediaSense
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-GroupForwardedFragments

Modifies the GroupForwardedFragments property. This parameter value determines whether fragments should be collected into groups before being forwarded. The default value is Disabled. The acceptable values for this parameter are:

-- Enabled: IPv6 protocol fragments are collected into groups before being forwarded.

-- Disabled: IPv6 protocol fragments are not collected into groups and are forwarded as the fragments are received.

Type:GroupForwardedFragments
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IcmpRedirects

Modifies the IcmpRedirects property. The acceptable values for this parameter are:

-- Enabled: The path cache is updated in response to ICMP redirect packets.

-- Disabled: The path cache is not updated in response to ICMP redirect packets.

The default value is Enabled.

Type:IcmpRedirects
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InputObject

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Type:CimInstance[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-MaxDadAttempts

Modifies the number of maximum DAD attempts. This parameter value determines the number of duplicate address detection attempts.

The default value is 5.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MaxPreferredLifetime

Modifies the maximum preferred lifetime. This parameter value determines the maximum lifetime over which a temporary address is preferred. This parameter value uses time as defined by the TimeSpanhttp://msdn.microsoft.com/library/system.timespan.aspx structure.

The default value is 1 day.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MaxRandomTime

Modifies the maximum random time. This parameter value determines the upper bound to use when computing a random delay at startup time. This parameter value uses time as defined by the TimeSpanhttp://msdn.microsoft.com/library/system.timespan.aspx structure.

The default value is 10 minutes.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MaxValidLifetime

Modifies the maximum valid lifetime. This parameter value determines the maximum lifetime over which a temporary address is valid. This parameter value uses time as defined by the TimeSpanhttp://msdn.microsoft.com/library/system.timespan.aspx structure.

The default value is 7 days.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MediaSenseEventLog

Modifies the MediaSenseEventLog property. The acceptable values for this parameter are:

-- Enabled: DHCP Media Sense events, connection or disconnection from the network, are logged in the event log for troubleshooting purposes.

-- Disabled: DHCP Media Sense events are not logged in the event log.

The default value is Disabled.

Type:MediaSenseEventLog
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MldLevel

Modifies the MLD level. This parameter value determines the level of multi-cast support. The acceptable values for this parameter are:

-- All: Multi-cast packets can be sent and received.

-- None: Multi-cast packets can neither be sent nor received.

-- SendOnly: Multi-cast packets can be sent but not received.

The default value is All.

Type:MldLevel
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MldVersion

Modifies the MLD version number. This parameter value displays the maximum MLD version supported by the host.

Type:MldVersion
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MulticastForwarding

Modifies the multi-cast forwarding property. The acceptable values for this parameter are:

-- Enabled: Multi-cast packets can be forwarded.

-- Disabled: Multi-cast packets cannot be forwarded.

The default value is Disabled.

Type:MulticastForwarding
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-NeighborCacheLimitEntries

Modifies the number of neighbor cache limit entries. This parameter value determines the maximum number of neighbor cache entries.

The default value is 256.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RandomizeIdentifiers

Modifies the RandomizeIdentifiers property. The acceptable values for this parameter are:

-- Enabled: Interface identifiers are randomized when creating an IP address.

-- Disabled: Interface identifiers are not randomized when creating an IP address.

The default value is Enabled.

Type:RandomizeIdentifiers
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ReassemblyLimitBytes

Modifies the ReassemblyLimitBytes property. This parameter value determines the maximum size of the reassembly buffer.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RegenerateTime

Modifies the RegenerateTime property. This parameter value determines time prior to deprecating a temporary address when a new address is generated. RegenerateTime uses time as defined by the TimeSpanhttp://msdn.microsoft.com/library/system.timespan.aspx structure.

The default value is 5 seconds.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RouteCacheLimitEntries

Modifies the number of route cache limit entries. This parameter value determines the maximum number of route cache entries.

The default value is 128.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SourceRoutingBehavior

Modifies the source routing behavior. This parameter value determines the behavior for source routed packets. Note: The computer allows three possible values. However, per RFC 5095http://www.ietf.org/rfc/rfc5095.txt support for forwarding of source routed IPv6 packets has been removed, and the Forward setting now has the same effect as DontForward. The acceptable values for this parameter are:

-- DontForward: Source routed packets can be received but not forwarded.

-- Drop: Source routed packets will be dropped.

The default value is DontForward.

Type:SourceRoutingBehavior
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-UseTemporaryAddresses

Modifies the UseTemporaryAddresses property. This parameter value determines whether temporary addresses are enabled. Temporary addresses are described in RFC 3041http://www.ietf.org/rfc/rfc3041.txt. The acceptable values for this parameter are:

-- Always: The computer will always generate temporary addresses with random numbers.

-- Counter: The computer will generate temporary addresses with the interface identifier. This is typically used for test purposes.

-- Disabled: The computer will not use temporary addresses.

-- Enabled: The computer will use temporary addresses.

Type:UseTemporaryAddresses
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

None