Export (0) Print
Expand All

New-PSSession

Updated: August 9, 2015

New-PSSession

Creates a persistent connection to a local or remote computer.

Aliases

The following abbreviations are aliases for this cmdlet: 

  • nsn

Syntax

Parameter Set: ComputerName
New-PSSession [[-ComputerName] <String[]> ] [-ApplicationName <String> ] [-Authentication <AuthenticationMechanism> {Default | Basic | Negotiate | NegotiateWithImplicitCredential | Credssp | Digest | Kerberos} ] [-CertificateThumbprint <String> ] [-ConfigurationName <String> ] [-Credential <PSCredential> ] [-EnableNetworkAccess] [-Name <String[]> ] [-Port <Int32> ] [-SessionOption <PSSessionOption> ] [-ThrottleLimit <Int32> ] [-UseSSL] [ <CommonParameters>]

Parameter Set: Session
New-PSSession [[-Session] <PSSession[]> ] [-EnableNetworkAccess] [-Name <String[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: Uri
New-PSSession [-ConnectionUri] <Uri[]> [-AllowRedirection] [-Authentication <AuthenticationMechanism> {Default | Basic | Negotiate | NegotiateWithImplicitCredential | Credssp | Digest | Kerberos} ] [-CertificateThumbprint <String> ] [-ConfigurationName <String> ] [-Credential <PSCredential> ] [-EnableNetworkAccess] [-Name <String[]> ] [-SessionOption <PSSessionOption> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]




Detailed Description

The New-PSSession cmdlet creates a Windows PowerShell session (PSSession) on a local or remote computer. When you create a PSSession, Windows PowerShell establishes a persistent connection to the remote computer.

Use a PSSession to run multiple commands that share data, such as a function or the value of a variable. To run commands in a PSSession, use the Invoke-Command cmdlet. To use the PSSession to interact directly with a remote computer, use the Enter-PSSession cmdlet. For more information, see about_PSSessions (http://go.microsoft.com/fwlink/?LinkID=135181).

You can run commands on a remote computer without creating a PSSession by using the ComputerName parameters of Enter-PSSession or Invoke-Command. When you use the ComputerName parameter, Windows PowerShell creates a temporary connection that is used for the command and is then closed.

Parameters

-AllowRedirection

Indicates that this cmdlet allows redirection of this connection to an alternate Uniform Resource Identifier (URI).

When you use the ConnectionURI parameter, the remote destination can return an instruction to redirect to a different URI. By default, Windows PowerShell does not redirect connections, but you can use this parameter to enable it to redirect the connection.

You can also limit the number of times the connection is redirected by changing the MaximumConnectionRedirectionCount session option value. Use the MaximumRedirection parameter of the New-PSSessionOption cmdlet or set the MaximumConnectionRedirectionCount property of the $PSSessionOption preference variable. The default value is 5.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ApplicationName<String>

Specifies the application name segment of the connection URI. Use this parameter to specify the application name when you are not using the ConnectionURI parameter in the command.

The default value is the value of the $PSSessionApplicationName preference variable on the local computer. If this preference variable is not defined, the default value is WSMAN. This value is appropriate for most uses. For more information, see about_Preference_Variables (http://go.microsoft.com/fwlink/?LinkID=113248).

The WinRM service uses the application name to select a listener to service the connection request. The value of this parameter should match the value of the URLPrefix property of a listener on the remote computer.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

True (ByPropertyName)

Accept Wildcard Characters?

false

-Authentication<AuthenticationMechanism>

Specifies the mechanism that is used to authenticate the user's credentials. The acceptable values for this parameter are:

-- Default
-- Basic
-- Credssp
-- Digest
-- Kerberos
-- Negotiate
-- NegotiateWithImplicitCredential

The default value is Default.

For more information about the values of this parameter, see the description of the AuthenticationMechanism Enumeration (http://go.microsoft.com/fwlink/?LinkID=144382) in the Microsoft Developer Network (MSDN) library.

Caution: Credential Security Support Provider (CredSSP) authentication, in which the user credentials are passed to a remote computer to be authenticated, is designed for commands that require authentication on more than one resource, such as accessing a remote network share. This mechanism increases the security risk of the remote operation. If the remote computer is compromised, the credentials that are passed to it can be used to control the network session.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-CertificateThumbprint<String>

Specifies the digital public key certificate (X509) of a user account that has permission to perform this action. Enter the certificate thumbprint of the certificate.

Certificates are used in client certificate-based authentication. They can be mapped only to local user accounts; they do not work with domain accounts.

To get a certificate, use the Get-Item or Get-ChildItem command in the Windows PowerShell Cert: drive.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ComputerName<String[]>

Specifies an array of names of computers. This cmdlet creates a persistent connection (PSSession) to the specified computer. If you enter multiple computer names, New-PSSession creates multiple PSSession objects, one for each computer. The default is the local computer.

Type the NetBIOS name, an IP address, or a fully qualified domain name of one or more remote computers. To specify the local computer, type the computer name, localhost, or a dot (.). When the computer is in a different domain than the user, the fully qualified domain name is required. You can also pipe a computer name, in quotation marks, to New-PSSession.

To use an IP address in the value of the ComputerName parameter, the command must include the Credential parameter. Also, the computer must be configured for HTTPS transport or the IP address of the remote computer must be included in the WinRM TrustedHosts list on the local computer. For instructions for adding a computer name to the TrustedHosts list, see "How to Add a Computer to the Trusted Host List" in about_Remote_Troubleshooting (http://go.microsoft.com/fwlink/?LinkID=135188).

To include the local computer in the value of the ComputerName parameter, start Windows PowerShell by using the Run as administrator option.


Aliases

Cn

Required?

false

Position?

1

Default Value

none

Accept Pipeline Input?

True (ByValue, ByPropertyName)

Accept Wildcard Characters?

false

-ConfigurationName<String>

Specifies the session configuration that is used for the new PSSession.

Enter a configuration name or the fully qualified resource URI for a session configuration. If you specify only the configuration name, the following schema URI is prepended: http://schemas.microsoft.com/PowerShell.

The session configuration for a session is located on the remote computer. If the specified session configuration does not exist on the remote computer, the command fails.

The default value is the value of the $PSSessionConfigurationName preference variable on the local computer. If this preference variable is not set, the default is Microsoft.PowerShell. For more information, see about_Preference_Variables (http://go.microsoft.com/fwlink/?LinkID=113248).


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

True (ByPropertyName)

Accept Wildcard Characters?

false

-ConnectionUri<Uri[]>

Specifies a URI that defines the connection endpoint for the session. The URI must be fully qualified. The format of this string is as follows:

<Transport>://<ComputerName>:<Port>/<ApplicationName>

The default value is as follows:

http://localhost:5985/WSMAN

If you do not specify a ConnectionURI, you can use the UseSSL, ComputerName, Port, and ApplicationName parameters to specify the ConnectionURI values.

Valid values for the Transport segment of the URI are HTTP and HTTPS. If you specify a connection URI with a Transport segment, but do not specify a port, the session is created with standards ports: 80 for HTTP and 443 for HTTPS. To use the default ports for Windows PowerShell remoting, specify port 5985 for HTTP or 5986 for HTTPS.

If the destination computer redirects the connection to a different URI, Windows PowerShell prevents the redirection unless you use the AllowRedirection parameter in the command.


Aliases

URI,CU

Required?

true

Position?

1

Default Value

none

Accept Pipeline Input?

True (ByPropertyName)

Accept Wildcard Characters?

false

-Credential<PSCredential>

Specifies a user account that has permission to perform this action. The default is the current user.

Type a user name, such as User01, Domain01\User01, or User@Domain.com, or enter a PSCredential object, such as one returned by the Get-Credential cmdlet.

When you type a user name, this cmdlet prompts you for a password.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

True (ByPropertyName)

Accept Wildcard Characters?

false

-EnableNetworkAccess

Indicates that this cmdlet adds an interactive security token to loopback sessions. The interactive token lets you run commands in the loopback session that get data from other computers. For example, you can run a command in the session that copies XML files from a remote computer to the local computer.

A loopback session is a PSSession that originates and ends on the same computer. To create a loopback session, omit the ComputerName parameter or set its value to dot (.), localhost, or the name of the local computer.

By default, this cmdlet creates loopback sessions by using a network token, which might not provide sufficient permission to authenticate to remote computers.

The EnableNetworkAccess parameter is effective only in loopback sessions. If you use EnableNetworkAccess when you create a session on a remote computer, the command succeeds, but the parameter is ignored.

You can also enable remote access in a loopback session by using the CredSSP value of the Authentication parameter, which delegates the session credentials to other computers.

To protect the computer from malicious access, disconnected loopback sessions that have interactive tokens, which are those created by using the EnableNetworkAccess parameter, can be reconnected only from the computer on which the session was created. Disconnected sessions that use CredSSP authentication can be reconnected from other computers. For more information, see Disconnect-PSSession.

This parameter was introduced in Windows PowerShell 3.0.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Name<String[]>

Specifies a friendly name for the PSSession.

You can use the name to refer to the PSSession when you use other cmdlets, such as Get-PSSession and Enter-PSSession. The name is not required to be unique to the computer or the current session.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Port<Int32>

Specifies the network port on the remote computer that is used for this connection. To connect to a remote computer, the remote computer must be listening on the port that the connection uses. The default ports are 5985, which is the WinRM port for HTTP, and 5986, which is the WinRM port for HTTPS.

Before using another port, you must configure the WinRM listener on the remote computer to listen at that port. Use the following commands to configure the listener:

1. winrm delete winrm/config/listener?Address=*+Transport=HTTP

2. winrm create winrm/config/listener?Address=*+Transport=HTTP @{Port="<port-number>"}

Do not use the Port parameter unless you must. The port setting in the command applies to all computers or sessions on which the command runs. An alternate port setting might prevent the command from running on all computers.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Session<PSSession[]>

Specifies an array of PSSession objects that this cmdlet uses as a model for the new PSSession. This parameter creates new PSSession objects that have the same properties as the specified PSSession objects.

Enter a variable that contains the PSSession objects or a command that creates or gets the PSSession objects, such as a New-PSSession or Get-PSSession command.

The resulting PSSession objects have the same computer name, application name, connection URI, port, configuration name, throttle limit, and Secure Sockets Layer (SSL) value as the originals, but they have a different display name, ID, and instance ID (GUID).


Aliases

none

Required?

false

Position?

1

Default Value

None

Accept Pipeline Input?

true(ByValue,ByPropertyName)

Accept Wildcard Characters?

false

-SessionOption<PSSessionOption>

Specifies advanced options for the session. Enter a SessionOption object, such as one that you create by using the New-PSSessionOption cmdlet, or a hash table in which the keys are session option names and the values are session option values.

The default values for the options are determined by the value of the $PSSessionOption preference variable, if it is set. Otherwise, the default values are established by options set in the session configuration.

The session option values take precedence over default values for sessions set in the $PSSessionOption preference variable and in the session configuration. However, they do not take precedence over maximum values, quotas or limits set in the session configuration.

For a description of the session options that includes the default values, see New-PSSessionOption. For information about the $PSSessionOption preference variable, see about_Preference_Variables (http://go.microsoft.com/fwlink/?LinkID=113248). For more information about session configurations, see about_Session_Configurations (http://go.microsoft.com/fwlink/?LinkID=145152).


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent connections that can be established to run this command. If you omit this parameter or enter a value of 0 (zero), the default value, 32, is used.

The throttle limit applies only to the current command, not to the session or to the computer.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-UseSSL

Indicates that this cmdlet uses the SSL protocol to establish a connection to the remote computer. By default, SSL is not used.

WS-Management encrypts all Windows PowerShell content transmitted over the network. The UseSSL parameter offers an additional protection that sends the data across an HTTPS connection instead of an HTTP connection.

If you use this parameter, but SSL is not available on the port that is used for the command, the command fails.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

<CommonParameters>

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see    about_CommonParameters.

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

  • System.String, System.URI, System.Management.Automation.Runspaces.PSSession

    You can pipe a string, URI, or session object to this cmdlet.


Outputs

The output type is the type of the objects that the cmdlet emits.

  • System.Management.Automation.Runspaces.PSSession

Notes

  • This cmdlet uses the Windows PowerShell remoting infrastructure. To use this cmdlet, the local computer and any remote computers must be configured for Windows PowerShell remoting. For more information, see about_Remote_Requirements (http://go.microsoft.com/fwlink/?LinkID=135187).

  • To create a PSSession on the local computer, start Windows PowerShell with the Run as administrator option.

  • When you are finished with the PSSession, use the Remove-PSSession cmdlet to delete the PSSession and release its resources.

Examples

Example 1: Create a session on the local computer

This command creates a new PSSession on the local computer and saves the PSSession in the $s variable.

You can now use this PSSession to run commands on the local computer.


PS C:\> $s = New-PSSession

Example 2: Create a session on a remote computer

This command creates a new PSSession on the Server01 computer and saves it in the $Server01 variable.

When creating multiple PSSession objects, assign them to variables with useful names. This will help you manage the PSSession objects in subsequent commands.


PS C:\> $Server01 = New-PSSession -ComputerName Server01

Example 3: Create sessions on multiple computers

This command creates three PSSession objects, one on each of the computers specified by the ComputerName parameter.

The command uses the assignment operator (=) to assign the new PSSession objects to variables: $s1, $s2, $s3. It assigns the Server01 PSSession to $s1, the Server02 PSSession to $s2, and the Server03 PSSession to $s3.

When you assign multiple objects to a series of variables, Windows PowerShell assigns each object to a variable in the series respectively. If there are more objects than variables, all remaining objects are assigned to the last variable. If there are more variables than objects, the remaining variables are empty (null).


PS C:\> $s1, $s2, $s3 = New-PSSession -ComputerName Server01,Server02,Server03

Example 4: Create a session with a specified port

This command creates a new PSSession on the Server01 computer that connects to server port 8081 and uses the SSL protocol. The new PSSession uses an alternative session configuration called E12.

Before setting the port, you must configure the WinRM listener on the remote computer to listen on port 8081. For more information, see the description of the Port parameter.


PS C:\> New-PSSession -ComputerName Server01 -Port 8081 -UseSSL -ConfigurationName E12

Example 5: Create a session based on an existing session

This command creates a PSSession with the same properties as an existing PSSession. You can use this command format when the resources of an existing PSSession are exhausted and a new PSSession is needed to offload some of the demand.

The command uses the Session parameter of New-PSSession to specify the PSSession saved in the $s variable. It uses the credentials of the Domain1\Admin01 user to complete the command.


PS C:\> New-PSSession -Session $s -Credential Domain01\User01

Example 6: Create a session with a global scope in a different domain

This example shows how to create a PSSession with a global scope on a computer in a different domain.

By default, PSSession objects created at the command line are created with local scope and PSSession objects created in a script have script scope.

To create a PSSession with global scope, create a new PSSession and then store the PSSession in a variable that is cast to a global scope. In this case, the $s variable is cast to a global scope.

The command uses the ComputerName parameter to specify the remote computer. Because the computer is in a different domain than the user account, the full name of the computer is specified together with the credentials of the user.


PS C:\> $global:s = New-PSSession -ComputerName Server1.Domain44.Corpnet.Fabrikam.com -Credential Domain01\Admin01

Example 7: Create sessions for many computers

This command creates a PSSession on each of the 200 computers listed in the Servers.txt file and it stores the resulting PSSession in the $rs variable. The PSSession objects have a throttle limit of 50.

You can use this command format when the names of computers are stored in a database, spreadsheet, text file, or other text-convertible format.


PS C:\> $rs = Get-Content C:\Test\Servers.txt | New-PSSession -ThrottleLimit 50

Example 8: Create a session by using a URI

This command creates a PSSession on the Server01 computer and stores it in the $s variable. It uses the URI parameter to specify the transport protocol, the remote computer, the port, and an alternate session configuration. It also uses the Credential parameter to specify a user account that has permission to create a session on the remote computer.


PS C:\> $s = New-PSSession -URI http://Server01:91/NewSession -Credential Domain01\User01

Example 9: Run a background job in a set of sessions

These commands create a set of PSSession objects and then run a background job in each of the PSSession objects.

The first command creates a new PSSession on each of the computers listed in the Servers.txt file. It uses the New-PSSession cmdlet to create the PSSession. The value of the ComputerName parameter is a command that uses the Get-Content cmdlet to get the list of computer names the Servers.txt file.

The command uses the Credential parameter to create the PSSession objects that have the permission of a domain administrator, and it uses the ThrottleLimit parameter to limit the command to 16 concurrent connections. The command saves the PSSession objects in the $s variable.

The second command uses the AsJob parameter of the Invoke-Command cmdlet to start a background job that runs a Get-Process PowerShell command in each of the PSSession objects in $s.

For more information about background jobs, see about_Jobs (http://go.microsoft.com/fwlink/?LinkID=113251) and about_Remote_Jobs (http://go.microsoft.com/fwlink/?LinkID=135184).


PS C:\> $s = New-PSSession -ComputerName (Get-Content Servers.txt) -Credential Domain01\Admin01 -ThrottleLimit 16
PS C:\>Invoke-Command -Session $s -ScriptBlock {Get-Process PowerShell} -AsJob

Example 10: Create a session for a computer by using its URI

This command creates a PSSession objects that connects to a computer that is specified by a URI instead of a computer name.


PS C:\> New-PSSession -ConnectionURI https://management.exchangelabs.com/Management

Example 11: Create a session option

This example shows how to create a session option object and use the SessionOption parameter.

The first command uses the New-PSSessionOption cmdlet to create a session option. It saves the resulting SessionOption object in the $so variable.

The second command uses the option in a new session. The command uses the New-PSSession cmdlet to create a new session. The value of the SessionOption parameter is the SessionOption object in the $so variable.


PS C:\> $so = New-PSSessionOption -SkipCACheck
PS C:\>New-PSSession -ConnectionUri https://management.exchangelabs.com/Management -SessionOption $so -Credential Server01\Admin01

Related topics

Community Additions

ADD
Show:
© 2016 Microsoft