Set-VpnS2SInterface

Set-VpnS2SInterface

Updates parameters for an S2S Interface.

Syntax

Parameter Set: CustomPolicy
Set-VpnS2SInterface [-Name] <String> -CustomPolicy [-AdminStatus <Boolean> ] [-AuthenticationMethod <String> {EAP | MachineCertificates | PSKOnly | } ] [-AuthenticationTransformConstants <AuthenticationTransformConstants> {MD596 | SHA196 | SHA256128 | GCMAES128 | GCMAES192 | GCMAES256 | None} ] [-Certificate <X509Certificate2> ] [-CimSession <CimSession[]> ] [-CipherTransformConstants <CipherTransformConstants> {DES | DES3 | AES128 | AES192 | AES256 | GCMAES128 | GCMAES192 | GCMAES256 | None} ] [-Destination <String[]> ] [-DHGroup <DHGroup> {None | Group1 | Group2 | Group14 | ECP256 | ECP384 | Group24} ] [-EapMethod <String> {EAP-TLS | EAP-PEAP | EAP-MSCHAPv2 | } ] [-EnableQoS <EnableQoS> ] [-EncryptionMethod <EncryptionMethod> {DES | DES3 | AES128 | AES192 | AES256} ] [-Force] [-IdleDisconnectSeconds <UInt32> ] [-InformationAction <ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <String> ] [-InitiateConfigPayload <Boolean> ] [-IntegrityCheckMethod <IntegrityCheckMethod> {MD5 | SHA1 | SHA256 | SHA384} ] [-InternalIPv4 <Boolean> ] [-InternalIPv6 <Boolean> ] [-IPv4Subnet <String[]> ] [-IPv4TriggerFilter <String[]> ] [-IPv4TriggerFilterAction <Action> ] [-IPv6Subnet <String[]> ] [-IPv6TriggerFilter <String[]> ] [-IPv6TriggerFilterAction <Action> ] [-LocalVpnTrafficSelector <CimInstance[]> ] [-MMSALifeTimeSeconds <UInt32> ] [-NetworkOutageTimeSeconds <UInt32> {3 | 6 | 9 | 12 | 15 | 30 | 60 | 120 | 240 | 360 | 720 | 900} ] [-NumberOfTries <UInt32> ] [-PassThru] [-Password <String> ] [-Persistent] [-PfsGroup <PfsGroup> {None | PFS1 | PFS2 | PFS2048 | ECP256 | ECP384 | PFSMM | PFS24} ] [-PostConnectionIPv4Subnet <String[]> ] [-PostConnectionIPv6Subnet <String[]> ] [-PromoteAlternate <Boolean> ] [-RadiusAttributeClass <String> ] [-RemoteVpnTrafficSelector <CimInstance[]> ] [-ResponderAuthenticationMethod <String> {MachineCertificates | PSKOnly | } ] [-RetryIntervalSeconds <UInt32> ] [-RxBandwidthKbps <UInt64> ] [-SADataSizeForRenegotiationKilobytes <UInt32> ] [-SALifeTimeSeconds <UInt32> ] [-SharedSecret <String> ] [-SourceIpAddress <String> ] [-ThrottleLimit <Int32> ] [-TxBandwidthKbps <UInt64> ] [-UserName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: EncryptionType
Set-VpnS2SInterface [-Name] <String> [-AdminStatus <Boolean> ] [-AuthenticationMethod <String> {EAP | MachineCertificates | PSKOnly | } ] [-Certificate <X509Certificate2> ] [-CimSession <CimSession[]> ] [-Destination <String[]> ] [-EapMethod <String> {EAP-TLS | EAP-PEAP | EAP-MSCHAPv2 | } ] [-EnableQoS <EnableQoS> ] [-EncryptionType <String> {NoEncryption | RequireEncryption | OptionalEncryption | MaximumEncryption | CustomEncryption} ] [-Force] [-IdleDisconnectSeconds <UInt32> ] [-InformationAction <ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <String> ] [-InitiateConfigPayload <Boolean> ] [-InternalIPv4 <Boolean> ] [-InternalIPv6 <Boolean> ] [-IPv4Subnet <String[]> ] [-IPv4TriggerFilter <String[]> ] [-IPv4TriggerFilterAction <Action> ] [-IPv6Subnet <String[]> ] [-IPv6TriggerFilter <String[]> ] [-IPv6TriggerFilterAction <Action> ] [-LocalVpnTrafficSelector <CimInstance[]> ] [-MMSALifeTimeSeconds <UInt32> ] [-NetworkOutageTimeSeconds <UInt32> {3 | 6 | 9 | 12 | 15 | 30 | 60 | 120 | 240 | 360 | 720 | 900} ] [-NumberOfTries <UInt32> ] [-PassThru] [-Password <String> ] [-Persistent] [-PostConnectionIPv4Subnet <String[]> ] [-PostConnectionIPv6Subnet <String[]> ] [-PromoteAlternate <Boolean> ] [-RadiusAttributeClass <String> ] [-RemoteVpnTrafficSelector <CimInstance[]> ] [-ResponderAuthenticationMethod <String> {MachineCertificates | PSKOnly | } ] [-RetryIntervalSeconds <UInt32> ] [-RxBandwidthKbps <UInt64> ] [-SADataSizeForRenegotiationKilobytes <UInt32> ] [-SALifeTimeSeconds <UInt32> ] [-SharedSecret <String> ] [-SourceIpAddress <String> ] [-ThrottleLimit <Int32> ] [-TxBandwidthKbps <UInt64> ] [-UserName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: GreInterface
Set-VpnS2SInterface [-Name] <String> [[-Destination] <String[]> ] [[-GreKey] <UInt32> ] -GreTunnel [-AdminStatus <Boolean> ] [-CimSession <CimSession[]> ] [-EnableQoS <EnableQoS> ] [-Force] [-InformationAction <ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <String> ] [-InternalIPv4 <Boolean> ] [-InternalIPv6 <Boolean> ] [-IPv4Address <String> ] [-IPv4Subnet <String[]> ] [-IPv6Address <String> ] [-IPv6Subnet <String[]> ] [-PassThru] [-RxBandwidthKbps <UInt64> ] [-SourceIpAddress <String> ] [-ThrottleLimit <Int32> ] [-TxBandwidthKbps <UInt64> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]




Detailed Description

The Set-VpnS2SInterace cmdlet is used to update parameters for a site-to-site (S2S) interface. If the connection is already connected, the changes take effect after disconnection.
You can use the CustomPolicy parameter to customize Internet Protocol security (IPSec) settings. If the AuthenticationMethod parameter is set to pre-shared key (PSK), then only one interface can be enabled per destination and the initiator and responder policies are governed by what is specified for each interface. If the AuthenticationMethod parameter is set to user name or computer certificates (machine certificates), then only the initiator policies are governed by what is specified for each interface and the responder policies are governed by what is specified on the server.
For incoming connections:

-- If the authentication method is pre shared key, the interface whose destination IP matches the incoming IP is activated.
-- If the authentication method is username, the interface whose name matches the username is activated.
-- If the authentication method is certificates the interface whose name matches the certificate subject name is activated.

This cmdlet is used to modify parameters a S2S Interface. If the connection is already connected, the changes take effect after disconnection.

Parameters

-AdminStatus<Boolean>

Specifies the admin status of the cmdlet.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-AuthenticationMethod<String>

Specifies the AuthenticationMethod to be used by the S2S connection.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-AuthenticationTransformConstants<AuthenticationTransformConstants>

Specifies the authentication transform plumbed in IPsec policy.


Aliases

FirstTransformType,AuthenticationTransformConstant

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-Certificate<X509Certificate2>

Specifies the subject name of the certificate to be used in default store. This parameter is applicable only if the AuthenticationMethod parameter is set to MachineCert.


Aliases

Cert

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-CimSession<CimSession[]>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.


Aliases

Session

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-CipherTransformConstants<CipherTransformConstants>

Specifies the cipher plumbed in IPsec policy.


Aliases

OtherCipherAlgorithm,FirstCipherAlgorithm,CipherTransformConstant

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-CustomPolicy

Specifies custom Internet Key Exchange (IKE) IPsec policies, must be a separate parameter set.


Aliases

none

Required?

true

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Destination<String[]>

Specifies the destination end-point of the S2S connection.


Aliases

RemoteTunnelEndpoint,RemoteTunnelHostname,RemoteAddress

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-DHGroup<DHGroup>

Specifies the Diffie–Hellman (DH) Group Plumbed in IPsec policy.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-EapMethod<String>

Specifies EAP method if IkeLocalAuthenticationMethod is EAP.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-EnableQoS<EnableQoS>

Indicates whether to enable Quality of Service (QoS) on an interface. The acceptable values for this parameter are:

-- Enabled
-- Disabled


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-EncryptionMethod<EncryptionMethod>

Specifies the encryption method plumbed in IKE policy.


Aliases

Encryption

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-EncryptionType<String>

Specifies the type of Encryption.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-Force

Forces the command to run without asking for user confirmation.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-GreKey<UInt32>

Specifies the individual traffic flows within a Generic Routing Encapsulation (GRE) tunnel.


Aliases

none

Required?

false

Position?

4

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-GreTunnel

Indicates that this cmdlet uses the GRE tunnel capability for the Windows Server Gateway.


Aliases

none

Required?

true

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-IdleDisconnectSeconds<UInt32>

Specifies the time, in seconds, after which an idle connection is terminated. Unless the idle time-out is disabled, the entire connection is terminated if the connection is idle for the specified interval.


Aliases

IdleDurationSeconds,IdleDisconnectSec

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-InformationAction<ActionPreference>

Specifies how this cmdlet responds to an information event. The acceptable values for this parameter are:

-- SilentlyContinue
-- Stop
-- Continue
-- Inquire
-- Ignore
-- Suspend


Aliases

infa

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-InformationVariable<String>

Specifies a variable in which to store an information event message.


Aliases

iv

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-InitiateConfigPayload<Boolean>

Indicates whether to initiate a config payload negotiation.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-IntegrityCheckMethod<IntegrityCheckMethod>

Specifies the integrity method plumbed in IPsec policy.


Aliases

FirstIntegrityAlgorithm,OtherHashAlgorithm

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-InternalIPv4<Boolean>

Specifies that the IPv4 address should be negotiated.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-InternalIPv6<Boolean>

Specifies that the Ipv6 address should be negotiated.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-IPv4Address<String>

Specifies the IPv4 address.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-IPv4Subnet<String[]>

Specifies the IPv4 subnet that is routed on this connection with metric.


Aliases

IPv4TriggerSubnet

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-IPv4TriggerFilter<String[]>

Specifies an array of IPv4 filters that trigger demand dial connections.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByValue,ByPropertyName)

Accept Wildcard Characters?

false

-IPv4TriggerFilterAction<Action>

Indicates whether a filter should trigger an S2S connection.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByValue,ByPropertyName)

Accept Wildcard Characters?

false

-IPv6Address<String>

Specifies the IPv6 address.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-IPv6Subnet<String[]>

Specifies the IPv6 subnet that is routed on this connection with metric.


Aliases

IPv6TriggerSubnet

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-IPv6TriggerFilter<String[]>

Specifies an array of IPv6 filters that trigger demand dial connections.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByValue,ByPropertyName)

Accept Wildcard Characters?

false

-IPv6TriggerFilterAction<Action>

Indicates whether a filter should trigger an S2S connection.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByValue,ByPropertyName)

Accept Wildcard Characters?

false

-LocalVpnTrafficSelector<CimInstance[]>

Specifies the traffic selector object.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-MMSALifeTimeSeconds<UInt32>

Aliases

MMSaLifeTimeSec

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-Name<String>

Specifies the name of the connection.


Aliases

ElementName

Required?

true

Position?

2

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-NetworkOutageTimeSeconds<UInt32>

Specifies the maximum network outage time after which the connection is disconnected.


Aliases

NetworkOutageTimeSec

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-NumberOfTries<UInt32>

Specifies the number of tries the connection is retried. If you specify 0, the cmdlet will retry indefinitely.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Password<String>

Specifies the password of the username to be used for dialing the connection. This parameter is only applicable if AuthenticationMethod is set to EAP.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Persistent

Indicates whether the connection state is persisted across the service restart or system reboots.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-PfsGroup<PfsGroup>

Specifies the perfect forward secrecy (PFS) Group plumbed in IPsec policy.


Aliases

PfsGroupId

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-PostConnectionIPv4Subnet<String[]>

Specifies the IPv4 subnet routes that are added to a S2S interface after the connection is established. The values specified are not used to initiate the S2S VPN connection.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-PostConnectionIPv6Subnet<String[]>

Specifies the IPv6 subnet routes that are added to a S2S interface after the connection is established. The values specified are not used to initiate the S2S VPN connection.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-PromoteAlternate<Boolean>

Specifies an alternate IP address that when it successfully connects becomes the primary IP address, and the current primary IP address is moved to the alternate list.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-RadiusAttributeClass<String>

Specifies a RADIUS attribute.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-RemoteVpnTrafficSelector<CimInstance[]>

Specifies the traffic selector object.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-ResponderAuthenticationMethod<String>

Specifies the responder AuthenticationMethod to be used by the S2S connection.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-RetryIntervalSeconds<UInt32>

Specifies the number of seconds between retries.


Aliases

RetryIntervalSec

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-RxBandwidthKbps<UInt64>

Specifies the receive bandwidth limit, in kilobits per second (Kbps).


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-SADataSizeForRenegotiationKilobytes<UInt32>

Specifies the number of kilobytes that are allowed to transfer using a security association (SA), after which the SA will be renegotiated.


Aliases

SARenegotiationDataSizeKB,LifeTimeKiloBytes

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-SALifeTimeSeconds<UInt32>

Specifies the lifetime of a SA in seconds, after which the SA is no longer valid.


Aliases

SaLifeTimeSec,LifeTimeSeconds,QMSALifeTimeSeconds

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-SharedSecret<String>

Specifies the text of the shared secret to be used in dialing the connection. This parameter is only applicable if AuthenticationMethod is set to PSK.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-SourceIpAddress<String>

Specifies the source IPv4 or IPv6 addresses to use when dialing the connection.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent connections that can be established to run this command. If you omit this parameter or enter a value of 0, the default value, 32, is used.

The throttle limit applies only to the current command, not to the session or to the computer.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-TxBandwidthKbps<UInt64>

Specifies a transmit bandwidth limit, in Kbps, for the interface.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-UserName<String>

Specifies the username to be used for dialing this connection. This parameter is only applicable if AuthenticationMethod is set to EAP.


Aliases

User

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

true(ByPropertyName)

Accept Wildcard Characters?

false

-Confirm

Prompts you for confirmation before running the cmdlet.


Required?

false

Position?

named

Default Value

false

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.


Required?

false

Position?

named

Default Value

false

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

<CommonParameters>

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see    about_CommonParameters.

<WorkflowParameters>

This cmdlet supports the following workflow common parameters: -PSParameterCollection, -PSComputerName, -PSCredential, -PSConnectionRetryCount, -PSConnectionRetryIntervalSec, -PSRunningTimeoutSec, -PSElapsedTimeoutSec, -PSPersist, -PSAuthentication, -PSAuthenticationLevel, -PSApplicationName, -PSPort, -PSUseSSL, -PSConfigurationName, -PSConnectionURI, -PSAllowRedirection, -PSSessionOption, -PSCertificateThumbprint, -PSPrivateMetadata, -AsJob, -JobName, and –InputObject. For more information, see    about_WorkflowCommonParameters.

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

Outputs

The output type is the type of the objects that the cmdlet emits.

  • Microsoft.Management.Infrastructure.CimInstance#VpnS2SInterface

Examples

Example 1: Modify the destination address of an interface

This command modifies the destination address of interface named Edge1.


PS C:\> Set-VpnS2SInterface -Name "Edge1" -Destination 131.107.0.4 -PassThru

Example 2: Modify the initiator authentication method

This command modifies the initiator authentication method.


PS C:\> Set-VpnS2SInterface –Name "Edge1" -AuthenticationMethod EAP -EapMethod EAP-MSCHAPv2 -PassThru

Example 3: Modify the configuration of an existing S2S VPN interface

This command modifies the configuration of an existing S2S VPN interface of a specific routing domain in a Multi-Tenant environment.


PS C:\> Set-VpnS2SInterface -Name "Edge1" -IPv4Subnet 172.23.90.0/24:50 -PassThru

Related topics

Community Additions

ADD
Show: