Any suggestions? Export (0) Print
Expand All
Collapse the table of content
Expand the table of content
Expand Minimize

Set-MailboxTransportService

 

Applies to: Exchange Server 2016

This cmdlet is available only in on-premises Exchange Server 2016.

Use the Set-MailboxTransportService cmdlet to view the transport configuration information for the Mailbox Transport service on Mailbox servers.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Set-MailboxTransportService -Identity <MailboxTransportServerIdParameter> [-Confirm [<SwitchParameter>]] [-ConnectivityLogEnabled <$true | $false>] [-ConnectivityLogMaxAge <EnhancedTimeSpan>] [-ConnectivityLogMaxDirectorySize <Unlimited>] [-ConnectivityLogMaxFileSize <Unlimited>] [-ConnectivityLogPath <LocalLongFullPath>] [-ContentConversionTracingEnabled <$true | $false>] [-DomainController <Fqdn>] [-MailboxDeliveryAgentLogEnabled <$true | $false>] [-MailboxDeliveryAgentLogMaxAge <EnhancedTimeSpan>] [-MailboxDeliveryAgentLogMaxDirectorySize <Unlimited>] [-MailboxDeliveryAgentLogMaxFileSize <Unlimited>] [-MailboxDeliveryAgentLogPath <LocalLongFullPath>] [-MailboxDeliveryConnectorProtocolLoggingLevel <None | Verbose>] [-MailboxDeliveryThrottlingLogEnabled <$true | $false>] [-MailboxDeliveryThrottlingLogMaxAge <EnhancedTimeSpan>] [-MailboxDeliveryThrottlingLogMaxDirectorySize <Unlimited>] [-MailboxDeliveryThrottlingLogMaxFileSize <Unlimited>] [-MailboxDeliveryThrottlingLogPath <LocalLongFullPath>] [-MailboxSubmissionAgentLogEnabled <$true | $false>] [-MailboxSubmissionAgentLogMaxAge <EnhancedTimeSpan>] [-MailboxSubmissionAgentLogMaxDirectorySize <Unlimited>] [-MailboxSubmissionAgentLogMaxFileSize <Unlimited>] [-MailboxSubmissionAgentLogPath <LocalLongFullPath>] [-MaxConcurrentMailboxDeliveries <Int32>] [-MaxConcurrentMailboxSubmissions <Int32>] [-PipelineTracingEnabled <$true | $false>] [-PipelineTracingPath <LocalLongFullPath>] [-PipelineTracingSenderAddress <SmtpAddress>] [-ReceiveProtocolLogMaxAge <EnhancedTimeSpan>] [-ReceiveProtocolLogMaxDirectorySize <Unlimited>] [-ReceiveProtocolLogMaxFileSize <Unlimited>] [-ReceiveProtocolLogPath <LocalLongFullPath>] [-RoutingTableLogMaxAge <EnhancedTimeSpan>] [-RoutingTableLogMaxDirectorySize <Unlimited>] [-RoutingTableLogPath <LocalLongFullPath>] [-SendProtocolLogMaxAge <EnhancedTimeSpan>] [-SendProtocolLogMaxDirectorySize <Unlimited>] [-SendProtocolLogMaxFileSize <Unlimited>] [-SendProtocolLogPath <LocalLongFullPath>] [-WhatIf [<SwitchParameter>]]

This example sets the ReceiveProtocolLogPath parameter to C:\SMTP Protocol Logs\Receive.log for the Mailbox Transport service on server Mailbox01.

Set-MailboxTransportService Mailbox01 -ReceiveProtocolLogPath "C:\SMTP Protocol Logs\Receive.log"

The Mailbox Transport service runs on all Mailbox servers and is responsible for delivering messages to and accepting messages from local mailbox databases using a remote procedure call (RPC). The Mailbox Transport service also uses SMTP to send messages to and from the Transport service that runs on all Mailbox servers for routing messages to their ultimate destinations.

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Mailbox Transport service" entries in the Mail flow permissions topic.

 

Parameter Required Type Description

Identity

Required

Microsoft.Exchange.Configuration.Tasks.MailboxTransportServerIdParameter

The Identity parameter specifies the server that you want to modify.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

ConnectivityLogEnabled

Optional

System.Boolean

The ConnectivityLogEnabled parameter specifies whether the connectivity log is enabled. The default value is $true.

ConnectivityLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ConnectivityLogMaxAge parameter specifies the maximum age for the connectivity log file. Log files older than the specified value are deleted. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

For example, to specify 25 days for this parameter, use 25.00:00:00. The valid input range for this parameter is from 00:00:00 through 24855.03:14:07. Setting the value of the ConnectivityLogMaxAge parameter to 00:00:00 prevents the automatic removal of connectivity log files because of their age.

ConnectivityLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The ConnectivityLogMaxDirectorySize parameter specifies the maximum size of all connectivity logs in the connectivity log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 1000 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log directory.

ConnectivityLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The ConnectivityLogMaxFileSize parameter specifies the maximum size of each connectivity log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the ConnectivityLogMaxFileSize parameter must be less than or equal to the value of the ConnectivityLogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the connectivity log files.

ConnectivityLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The ConnectivityLogPath parameter specifies the default connectivity log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\Connectivity. Setting the value of this parameter to $null disables connectivity logging. However, setting this parameter to $null when the value of the ConnectivityLogEnabled attribute is $true generates event log errors.

ContentConversionTracingEnabled

Optional

System.Boolean

The ContentConversionTracingEnabled parameter specifies whether content conversion tracing is enabled. Content conversion tracing captures content conversion failures that occur in the Transport service or in the Mailbox Transport service on the Mailbox server. The default value is $false. Content conversion tracing captures a maximum of 128 MB of content conversion failures. When the 128 MB limit is reached, no more content conversion failures are captured. Content conversion tracing captures the complete contents of email messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:

  • Administrators: Full Control

  • Network Service: Full Control

  • System: Full Control

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

MailboxDeliveryAgentLogEnabled

Optional

System.Boolean

The MailboxDeliveryAgentLogEnabled parameter specifies whether the agent log for the Mailbox Transport Delivery service is enabled. The default value is $true.

MailboxDeliveryAgentLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The MailboxDeliveryAgentLogMaxAge parameter specifies the maximum age for the agent log file of the Mailbox Transport Delivery service. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Setting the value of the MailboxDeliveryAgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.

MailboxDeliveryAgentLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The MailboxDeliveryAgentLogMaxDirectorySize parameter specifies the maximum size of all Mailbox Transport Delivery service agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the MailboxDeliveryAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.

MailboxDeliveryAgentLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The MailboxDeliveryAgentLogMaxFileSize parameter specifies the maximum size of each agent log file for the Mailbox Transport Delivery service. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the MailboxDeliveryAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.

MailboxDeliveryAgentLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The MailboxDeliveryAgentLogPath parameter specifies the default agent log directory location for the Mailbox Transport Delivery service. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\AgentLog\Delivery. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the MailboxDeliveryAgentLogEnabled attribute is $true generates event log errors.

MailboxDeliveryConnectorProtocolLoggingLevel

Optional

Microsoft.Exchange.Data.ProtocolLoggingLevel

The MailboxDeliveryConnectorProtocolLoggingLevel parameter enables or disables SMTP protocol logging for the implicit and invisible mailbox delivery Receive connector in the Mailbox Transport Delivery service. Valid values are:

  • None   Protocol logging is disabled for the mailbox delivery Receive connector. This is the default value.

  • Verbose   Protocol logging is enabled for the mailbox delivery Receive connector. The location of the log files is controlled by the ReceiveProtocolLogPath parameter.

MailboxDeliveryThrottlingLogEnabled

Optional

System.Boolean

The MailboxDeliveryThrottlingLogEnabled parameter specifies whether the mailbox delivery throttling log is enabled. The default value is $true.

MailboxDeliveryThrottlingLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The MailboxDeliveryThrottlingLogMaxAge parameter specifies the maximum age for the mailbox delivery throttling log file. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Setting the value of the MailboxDeliveryThrottlingLogMaxAge parameter to 00:00:00 prevents the automatic removal of mailbox delivery throttling log files because of their age.

MailboxDeliveryThrottlingLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The MailboxDeliveryThrottlingLogMaxDirectorySize parameter specifies the maximum size of all mailbox delivery throttling logs in the mailbox delivery throttling log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 200 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the MailboxDeliveryThrottlingLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryThrottlingLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the mailbox delivery throttling log directory.

MailboxDeliveryThrottlingLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The MailboxDeliveryThrottlingLogMaxFileSize parameter specifies the maximum size of each mailbox delivery throttling log file. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the MailboxDeliveryThrottlingLogMaxFileSize parameter must be less than or equal to the value of the MailboxDeliveryThrottlingLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the mailbox delivery throttling log files.

MailboxDeliveryThrottlingLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The MailboxDeliveryThrottlingLogPath parameter specifies the default mailbox delivery throttling log directory location. The default location is %ExchangeInstallPath%TransportRoles\Logs\Throttling\Delivery. Setting the value of this parameter to $null disables mailbox delivery throttling logging. However, setting this parameter to $null when the value of the MailboxDeliveryThrottlingLogEnabled attribute is $true generates event log errors.

MailboxSubmissionAgentLogEnabled

Optional

System.Boolean

The MailboxSubmissionAgentLogEnabled parameter specifies whether the agent log is enabled for the Mailbox Transport Submission service. The default value is $true.

MailboxSubmissionAgentLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The MailboxSubmissionAgentLogMaxAge parameter specifies the maximum age for the agent log file of the Mailbox Transport Submission service. Log files older than the specified value are deleted. The default value is 7.00:00:00 or 7 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Setting the value of the MailboxSubmissionAgentLogMaxAge parameter to 00:00:00 prevents the automatic removal of agent log files because of their age.

MailboxSubmissionAgentLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The MailboxSubmissionAgentLogMaxDirectorySize parameter specifies the maximum size of all Mailbox Transport Submission service agent logs in the agent log directory. When a directory reaches its maximum file size, the server deletes the oldest log files first. The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the MailboxSubmissionAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxSubmissionAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log directory.

MailboxSubmissionAgentLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The MailboxSubmissionAgentLogMaxFileSize parameter specifies the maximum size of each agent log file for the Mailbox Transport Submission service. When a log file reaches its maximum file size, a new log file is created. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the MailboxSubmissionAgentLogMaxFileSize parameter must be less than or equal to the value of the MailboxSubmissionAgentLogMaxDirectorySize parameter. If you enter a value of unlimited, no size limit is imposed on the agent log files.

MailboxSubmissionAgentLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The MailboxSubmissionAgentLogPath parameter specifies the default agent log directory location for the Mailbox Transport Submission service. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\AgentLog\Submission. Setting the value of this parameter to $null disables agent logging. However, setting this parameter to $null when the value of the MailboxSubmissionAgentLogEnabled attribute is $true generates event log errors.

MaxConcurrentMailboxDeliveries

Optional

System.Int32

The MaxConcurrentMailboxDeliveries parameter specifies the maximum number of delivery threads that the transport service can have open at the same time to deliver messages to mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256. We recommend that you don't modify the default value unless Microsoft Customer Service and Support advises you to do this.

MaxConcurrentMailboxSubmissions

Optional

System.Int32

The MaxConcurrentMailboxSubmissions parameter specifies the maximum number of submission threads that the transport service can have open at the same time to send messages from mailboxes. The default value is 20. The valid input range for this parameter is from 1 through 256.

PipelineTracingEnabled

Optional

System.Boolean

The PipelineTracingEnabled parameter specifies whether to enable pipeline tracing. Pipeline tracing captures message snapshot files that record the changes made to the message by each transport agent configured in the transport service on the server. Pipeline tracing creates verbose log files that accumulate quickly. Pipeline tracing should only be enabled for a short time to provide in-depth diagnostic information that enables you to troubleshoot problems. In addition to troubleshooting, you can use pipeline tracing to validate changes that you make to the configuration of the transport service where you enable pipeline tracing. The default value is $false.

PipelineTracingPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The PipelineTracingPath parameter specifies the location of the pipeline tracing logs. The default location is %ExchangeInstallPath%TransportRoles\Mailbox\Hub\PipelineTracing. The path must be local to the Exchange computer. Setting the value of this parameter to $null disables pipeline tracing. However, setting this parameter to $null when the value of the PipelineTracingEnabled attribute is $true generates event log errors. The preferred method to disable pipeline tracing is to use the PipelineTracingEnabled parameter. Pipeline tracing captures the complete contents of email messages to the path specified by the PipelineTracingPath parameter. Make sure that you restrict access to this directory. The permissions required on the directory specified by the PipelineTracingPath parameter are as follows:

  • Administrators: Full Control

  • Network Service: Full Control

  • System: Full Control

PipelineTracingSenderAddress

Optional

Microsoft.Exchange.Data.SmtpAddress

The PipelineTracingSenderAddress parameter specifies the sender email address that invokes pipeline tracing. Only messages from this address generate pipeline tracing output. The address can be either inside or outside the Exchange organization. Depending on your requirements, you may have to set this parameter to different sender addresses and send new messages to start the transport agents or routes that you want to test. The default value of this parameter is $null.

ReceiveProtocolLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ReceiveProtocolLogMaxAge parameter specifies the maximum age of a protocol log file for the implicit and invisible mailbox delivery Receive connector in the Mailbox Transport Delivery service. Log files that are older than the specified value are automatically deleted.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Valid values are 00:00:00 to 24855.03:14:07. The default value is 30.00:00:00 (30 days).

The value00:00:00 prevents the automatic removal of Receive connector protocol log files because of their age.

This parameter is only meaningful when the MailboxDeliveryConnectorProtocolLoggingLevel parameter is set to the value Verbose.

ReceiveProtocolLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The ReceiveProtocolLogMaxDirectorySize parameter specifies the maximum size of the protocol log directory for the implicit and invisible mailbox delivery Receive connector in the Mailbox Transport Delivery service. When the maximum directory size is reached, the server deletes the oldest log files first.

A valid value is a number up to 909.5 terabytes (999999999999999 bytes) or the value unlimited. The default value is 250 megabytes (262144000 bytes).

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of this parameter must be greater than or equal to the value of the ReceiveProtocolLogMaxFileSize parameter.

This parameter is only meaningful when the MailboxDeliveryConnectorProtocolLoggingLevel parameter is set to the value Verbose.

ReceiveProtocolLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The ReceiveProtocolLogMaxFileSize parameter specifies the maximum size of a protocol log file for the implicit and invisible mailbox delivery Receive connector in the Mailbox Transport Delivery service. When a log file reaches its maximum file size, a new log file is created.

A valid value is a number up to 909.5 terabytes (999999999999999 bytes) or the value unlimited. The default value is 10 megabytes (10485760 bytes).

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of this parameter must be less than or equal to the value of the ReceiveProtocolLogMaxDirectorySize parameter.

This parameter is only meaningful when the MailboxDeliveryConnectorProtocolLoggingLevel parameter is set to the value Verbose.

ReceiveProtocolLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The ReceiveProtocolLogPath parameter specifies the location of the protocol log directory for the implicit and invisible mailbox delivery Receive connector in the Mailbox Transport Delivery service. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\ProtocolLog\SmtpReceive. The log files are automatically stored in the Delivery subdirectory.

Don't use the value $null for this parameter, because event log errors are generated if protocol logging is enabled for the mailbox delivery Receive connector. To disable protocol logging for this connector, use the value None for the MailboxDeliveryConnectorProtocolLoggingLevel parameter.

RoutingTableLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

PARAMVALUE: EnhancedTimeSpan

RoutingTableLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

PARAMVALUE: Unlimited

RoutingTableLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

PARAMVALUE: LocalLongFullPath

SendProtocolLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The SendProtocolLogMaxAge parameter specifies the maximum age of a protocol log file for the implicit and invisible intra-organization Send connector in the Mailbox Transport Submission service. Log files that are older than the specified value are automatically deleted.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Valid values are 00:00:00 to 24855.03:14:07. The default value is 30.00:00:00 (30 days). The value 00:00:00 prevents the automatic removal of Send connector protocol log files because of their age.

This parameter is only meaningful when the IntraOrgConnectorProtocolLoggingLevel parameter on the Set-TransportService cmdlet is set to the value Verbose.

SendProtocolLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

The SendProtocolLogMaxDirectorySize parameter specifies the maximum size of the protocol log directory for the implicit and invisible intra-organization Send connector in the Mailbox Transport Submission service. When the maximum directory size is reached, the server deletes the oldest log files first.

A valid value is a number up to 909.5 terabytes (999999999999999 bytes) or the value unlimited. The default value is 250 megabytes (262144000 bytes).

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of this parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter.

This parameter is only meaningful when the IntraOrgConnectorProtocolLoggingLevel parameter on the Set-TransportService cmdlet is set to the value Verbose.

SendProtocolLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

The SendProtocolLogMaxFileSize parameter specifies the maximum size of a protocol log file for the implicit and invisible intra-organization Send connector in the Mailbox Transport Submission service. When a log file reaches its maximum file size, a new log file is created.

A valid value is a number up to 909.5 terabytes (999999999999999 bytes) or the value unlimited. The default value is 10 megabytes (10485760 bytes).

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value this parameter must be less than or equal to the value of the SendProtocolLogMaxDirectorySize parameter.

This parameter is only meaningful when the IntraOrgConnectorProtocolLoggingLevel parameter on the Set-TransportService cmdlet is set to the value Verbose.

SendProtocolLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

The SendProtocolLogPath parameter specifies the location of the protocol log directory for the implicit and invisible intra-organization Send connector in the Mailbox Transport Submission service. The default location is %ExchangeInstallPath%TransportRoles\Logs\Mailbox\ProtocolLog\SmtpSend. Log files are automatically stored in the following subdirectories:

  • Submission   Protocol log files for the intra-organization Send connector in the Mailbox Transport Submission service.

  • Delivery   Protocol log files for side effect messages that are submitted after messages are delivered to mailboxes. For example, a message delivered to a mailbox triggers an Inbox rule that redirects the message to another recipient.

Don't use the value $null for this parameter, because event log errors are generated if protocol logging is enabled for the intra-organization Send connector in the Mailbox Transport Submission service. To disable protocol logging for this connector, use the value None for the IntraOrgConnectorProtocolLoggingLevel parameter on the Set-TransportService cmdlet.

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

MailboxDeliveryHttpDeliveryConcurrentConnections

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

MailboxDeliveryHttpDeliveryLogEnabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

MailboxDeliveryHttpDeliveryLogMaxAge

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

This parameter is reserved for internal Microsoft use.

MailboxDeliveryHttpDeliveryLogMaxDirectorySize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

MailboxDeliveryHttpDeliveryLogMaxFileSize

Optional

Microsoft.Exchange.Data.Unlimited

This parameter is reserved for internal Microsoft use.

MailboxDeliveryHttpDeliveryLogPath

Optional

Microsoft.Exchange.Data.LocalLongFullPath

This parameter is reserved for internal Microsoft use.

MailboxSubmissionHttpDeliveryConcurrentConnections

Optional

System.Int32

This parameter is reserved for internal Microsoft use.

MailboxDeliveryConnectorSmtpUtf8Enabled

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

 
Show:
© 2016 Microsoft