Set-MigrationBatch

 

Applies to: Exchange Online, Exchange Server 2016

This cmdlet is available in on-premises Exchange Server 2016 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-MigrationBatch cmdlet to update a migration request for a batch of users. For more information, see New-MigrationBatch.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Set-MigrationBatch -Identity <MigrationBatchIdParameter> [-AllowIncrementalSyncs <$true | $false>] [-AllowUnknownColumnsInCsv <$true | $false>] [-AutoRetryCount <Int32>] [-BadItemLimit <Unlimited>] [-CompleteAfter <DateTime>] [-Confirm [<SwitchParameter>]] [-CSVData <Byte[]>] [-DomainController <Fqdn>] [-LargeItemLimit <Unlimited>] [-NotificationEmails <MultiValuedProperty>] [-Partition <MailboxIdParameter>] [-ReportInterval <TimeSpan>] [-SkipMerging <MultiValuedProperty>] [-SkipMoving <MultiValuedProperty>] [-SkipReports <$true | $false>] [-SourcePublicFolderDatabase <DatabaseIdParameter>] [-StartAfter <DateTime>] [-SyncNow <SwitchParameter>] [-WhatIf [<SwitchParameter>]]

This example updates MigrationBatch01 with new AutoRetryCount and AllowIncrementalSyncs parameter settings.

Set-MigrationBatch -Identity MigrationBatch01 -AutoRetryCount 5 -AllowIncrementalSyncs $true

The Set-MigrationBatch cmdlet configures your existing migration batches to migrate mailboxes and mailbox data in one of the following scenarios:

  • Local move

  • Cross-forest move

  • Remote move

  • Cutover Exchange migration

  • Staged Exchange migration

  • IMAP migration

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Mailbox Move and Migration Permissions" section in the Recipients Permissions topic.

 

Parameter Required Type Description

Identity

Required

Microsoft.Exchange.Management.Migration.MigrationService.Batch.MigrationBatchIdParameter

The Identity parameter specifies the name of the migration batch that you want to update configuration settings for.

AllowIncrementalSyncs

Optional

System.Boolean

The AllowIncrementalSyncs parameter specifies whether to enable or disable incremental syncs on mailbox moves and migrations.

AllowUnknownColumnsInCsv

Optional

System.Boolean

The AllowUnknownColumnsInCsv parameter specifies whether to allow extra columns in the CSV file that aren't used by migration. Valid input for this parameter is $true or $false. The default value is $false. The default behavior means that any extra columns in the CSV file will cause the migration to fail, but it protects against accidental spelling errors in the column headers of optional columns. If you set the value of this parameter to $true, and the CSV contains an optional column that's incorrectly labeled, the migration will silently skip that column (it's treated like an extra column that's not used by migration).

AutoRetryCount

Optional

System.Int32

The AutoRetryCount parameter specifies the number of attempts to restart the migration batch to migrate mailboxes that encountered errors.

BadItemLimit

Optional

Microsoft.Exchange.Data.Unlimited

The BadItemLimit parameter specifies the maximum number of bad items that are allowed before the migration request fails. A bad item is a corrupt item in the source mailbox that can't be copied to the target mailbox. Also included in the bad item limit are missing items. Missing items are items in the source mailbox that can't be found in the target mailbox when the migration request is ready to complete.

Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the migration request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the migration request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the migration request again.

CompleteAfter

Optional

System.DateTime

This parameter is reserved for internal Microsoft use.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

CSVData

Optional

System.Byte[]

The CSVData parameter specifies the CSV file that contains information about the user mailboxes to be moved or migrated. The required attributes in the header row of the CSV file vary depending on the type of migration. Use the following format for the value of this parameter: ([System.IO.File]::ReadAllBytes(<path of the CSV migration file>)). The following is an example: CSVData:([System.IO.File]::ReadAllBytes("C:\Users\Administrator\Desktop\MigrationBatch_1.csv"))

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

This parameter is available only in on-premises Exchange 2016.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

LargeItemLimit

Optional

Microsoft.Exchange.Data.Unlimited

The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the migration request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.

For more information about maximum message size values, see the following topics:

Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the migration request will fail if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the migration request can proceed.

NotificationEmails

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The NotificationEmails parameter specifies one or more email addresses that migration status reports are sent to. Specify the value as a string array, and separate multiple email addresses with commas.

If you don't use this parameter, the status report isn't sent.

Partition

Optional

Microsoft.Exchange.Configuration.Tasks.MailboxIdParameter

This parameter is reserved for internal Microsoft use.

ReportInterval

Optional

System.TimeSpan

This parameter is reserved for internal Microsoft use.

SkipMerging

Optional

Microsoft.Exchange.Data.MultiValuedProperty

PARAMVALUE: MultiValuedProperty

SkipMoving

Optional

Microsoft.Exchange.Data.MultiValuedProperty

PARAMVALUE: MultiValuedProperty

SkipReports

Optional

System.Boolean

PARAMVALUE: $true | $false

SourcePublicFolderDatabase

Optional

Microsoft.Exchange.Configuration.Tasks.DatabaseIdParameter

This parameter is available only in on-premises Exchange 2016.

The SourcePublicFolderDatabase parameter specifies the name of the source public folder database that's used in a public folder migration.

StartAfter

Optional

System.DateTime

This parameter is reserved for internal Microsoft use.

SyncNow

Optional

System.Management.Automation.SwitchParameter

PARAMVALUE: SwitchParameter

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

 
Show: