Import-DhcpServer

Import-DhcpServer

Imports the DHCP server service configuration, and optionally lease data, from a file.

Syntax

Parameter Set: Default
Import-DhcpServer [-File] <String> [-BackupPath] <String> [-CimSession <CimSession> ] [-ComputerName <String> ] [-Force] [-Leases] [-Prefix <IPAddress[]> ] [-ScopeId <IPAddress[]> ] [-ScopeOverwrite] [-ServerConfigOnly] [ <CommonParameters>]




Detailed Description

The Import-DhcpServer cmdlet imports the Dynamic Host Configuration Protocol (DHCP) server service configuration, and optionally lease data, from the specified file.

If you specify either the ScopeId or the Prefix parameter, or both, only the specified scopes or prefixes are imported.

If you specify neither the ScopeId nor the Prefix parameter, all of the configurations that is contained in the file, and optionally any lease data, is imported.

If you specify the Leases parameter, the lease data in the specified file is imported in addition to configuration data.

If you specify the ScopeOverWrite parameter and the scope being imported exists on the destination server, the scope on the target DHCP server service is overwritten. If this parameter is not specified and the scope being imported exists on the destination DHCP server service, a warning message is displayed and the import proceeds to process the next scope being imported.

If you specify the ServerConfigOnly parameter, only the server level configuration is imported on the destination DHCP server service. If the file specified contains any scope information, the same information is not imported on the destination DHCP server service.

Parameters

-BackupPath<String>

Specifies the path where DHCP server database is backed up before it makes any configuration changes as part of the import operation.


Aliases

none

Required?

true

Position?

2

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-CimSession<CimSession>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.


Aliases

Session

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ComputerName<String>

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.


Aliases

Cn

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-File<String>

Specifies the name of the file from which the data is imported. If a complete file path is not specified, the file is read from the current working directory.


Aliases

none

Required?

true

Position?

1

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Force

Forces the command to run without asking for user confirmation.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Leases

Specifies that the lease data is also imported.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-Prefix<IPAddress[]>

Specifies the subnet prefixes of IPv6 scopes which are imported.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ScopeId<IPAddress[]>

Specifies the scope identifiers (IDs), in IPv4 address format, which must be imported.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ScopeOverwrite

Specifies that, if the scope being imported exists on the target server, the scope on the destination DHCP server service are overwritten.

If this parameter is not specified and the scope being imported exists on the destination DHCP server service, a warning message is displayed and import will proceed to process the next scope being imported.


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

-ServerConfigOnly

Specifies that only server level configuration is imported on the destination DHCP server service. If the file specified contains any scope information, the same is not imported on the destination DHCP server service.

Both DHCPv4 and DHCPv6 server level configurations is imported.

The server level configuration includes of (both v4 and v6):

-- Class definitions.
-- Option definitions.
-- Option values.
-- Server level Policies (DHCPv4).
-- MAC address filters (DHCPv4).
-- Other Server Properties (ConflicDetectionAttempts, DHCPv6 stateless store).


Aliases

none

Required?

false

Position?

named

Default Value

none

Accept Pipeline Input?

false

Accept Wildcard Characters?

false

<CommonParameters>

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see    about_CommonParameters.

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

  • None

Outputs

The output type is the type of the objects that the cmdlet emits.

  • None

Examples

Example 1: Import configuration data

This example imports the configuration data in the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. The file can contain DHCPv4 and DHCPv6 configuration data.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\"

Example 2 Import configuration and lease data

This example imports the configuration and lease data in the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. The file can contain DHCPv4 and DHCPv6 configuration data.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -Leases

Example 3: Import configuration data for specified scopes

This example imports the configuration data for scopes 10.10.10.0 and 10.20.20.0 from the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. If the export file contains scopes besides 10.10.10.0 and 10.20.20.0, those scopes are ignored. The DHCPv4 server level configuration data, if present in the export file, is also imported onto the DHCP server service.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -ScopeId 10.10.10.0,10.20.20.0

Example 4: Import configuration and lease data for specified scopes

This example imports the configuration and lease data for scopes 10.10.10.0 and 10.20.20.0 from the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. If the export file contains scopes besides 10.10.10.0 and 10.20.20.0, those scopes are ignored. The DHCPv4 server level configuration data, if present in the export file, is also imported onto the DHCP server service.


PS C:\> Import-DhcpServer -ComputerName dhcpserver.contoso.com -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -ScopeId 10.10.10.0,10.20.20.0 -Leases

Example 5: Import configuration and lease data for specified scopes with overwrite

This example imports the configuration and lease data for scopes 10.10.10.0 and 10.20.20.0 from the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. If the export file contains scopes besides 10.10.10.0 and 10.20.20.0, those scopes are ignored. The DHCPv4 server level configuration data, if present in the export file, is also imported onto the server. If the scopes 10.10.10.0 and 10.20.20.0 are already present on the DHCP server service that runs one the computer named dhcpserver.contoso.com, the scopes are deleted and recreated from the data in the export file.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -ScopeId 10.10.10.0,10.20.20.0 -Leases -ScopeOverwrite

Example 6: Import server level configuration data

This example imports only the server level configuration data in the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. Any scope configuration data, if present in the file, is ignored.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -ServerConfigOnly

Example 7: Import configuration data for specified scopes for DHCPv6

This example imports the configuration data for scopes 2001:4898:7020:1020:: and 2001:4898:7020:1030:: from the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. If the export file contains scopes besides 2001:4898:7020:1020:: and 2001:4898:7020:1030::, those scopes are ignored. The DHCPv6 server level configuration data, if present in the export file, is also imported onto the DHCP server service.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -Prefix 2001:4898:7020:1020::,2001:4898:7020:1030:: 

Example 8: Import configuration and lease data for specified scopes for DHCPv6

This example imports the configuration and lease data for scopes 2001:4898:7020:1020:: and 2001:4898:7020:1030:: from the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. If the export file contains scopes besides 2001:4898:7020:1020:: and 2001:4898:7020:1030::, those scopes are ignored. The DHCPv6 server level configuration data, if present in the export file, is also imported onto the DHCP server service.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -Prefix 2001:4898:7020:1020::,2001:4898:7020:1030:: -Leases

Example 9: Import configuration and lease data for specified scopes for DHCPv6 with overwrite

This example imports the configuration and lease data for scopes 2001:4898:7020:1020:: and 2001:4898:7020:1030:: from the specified file onto the DHCP server service that runs on the computer named dhcpserver.contoso.com. If the export file contains scopes besides 2001:4898:7020:1020:: and 2001:4898:7020:1030::, those scopes are ignored. The DHCPv6 server level configuration data, if present in the export file, is also imported onto the DHCP server service. If the scopes 2001:4898:7020:1020:: and 2001:4898:7020:1030:: are already present on the DHCP server service that runs on the computer named dhcpserver.contoso.com, the scopes are deleted and recreated from the data in the export file.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exports\dhcpexport.xml" -BackupPath "C:\dhcpbackup\" -Prefix 2001:4898:7020:1020::,2001:4898:7020:1030:: -Leases -ScopeOverwrite

Example 10: Import scopes specified in a file

This example imports a list of scopes specified in file named ScopeList.txt to the DHCP server service that runs on the computer named dhcpserver.contoso.com.

The file named ScopeList.txt should contain the following format:

ScopeID
10.10.10.0
10.20.20.0
10.30.30.0


 

The Import-Csv cmdlet gets the list of scopes to import and returns it in the variable named $ScopeIdList.


PS C:\> $ScopeIdList = Import-Csv –Path ".\ScopeList.txt"

 

This cmdlet imports the scopes using the variable named $ScopeIdList as input for the ScopeId parameter.


PS C:\> Import-DhcpServer -ComputerName "dhcpserver.contoso.com" -File "C:\exportdir\dhcpexport.xml" -Leases -ScopeId $ScopeIdList.ScopeId -BackupPath "C:\dhcpbackup\"

Related topics

Community Additions

ADD
Show: