Edit

Set-DhcpServerv6Scope

  • Reference
Module:
DhcpServer

Modifies the properties of the IPv6 scope on the Dynamic Host Configuration Protocol (DHCP) server service.

Syntax

Set-DhcpServerv6Scope
   [-Prefix] <IPAddress>
   [-Name <String>]
   [-Description <String>]
   [-State <String>]
   [-Preference <UInt16>]
   [-PreferredLifeTime <TimeSpan>]
   [-ValidLifeTime <TimeSpan>]
   [-T1 <TimeSpan>]
   [-T2 <TimeSpan>]
   [-ComputerName <String>]
   [-PassThru]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-DhcpServerv6Scope cmdlet modifies the properties of the IPv6 scope on the Dynamic Host Configuration Protocol (DHCP) server service.

Examples

EXAMPLE 1

PS C:\>Set-DhcpServerv6Scope -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -Name "Ext Lab Net VLAN100" -State Active

This example changes the name of the specified DHCPv6 scope to Ext Lab Net VLAN100 and activates the scope.

Parameters

-AsJob

ps_cimcommon_asjob

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.

Type:String
Aliases:Cn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Description

Specifies the description to set on the scope.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Name

Specifies the new name to set for the scope.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Preference

Specifies the preference value of the DHCP server service. The DHCP server service with the lowest preference value is selected by the DHCP client in case the client gets responses from more than one DHCP server service.

Type:UInt16
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PreferredLifeTime

Specifies the preferred life time of the IPv6 address leased by the DHCP server service.

This parameter value should be same or less than the ValidLifeTime parameter value.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Prefix

Specifies the IPv6 subnet prefix of the scope for which the properties are modified.

Type:IPAddress
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-State

Specifies the state of the scope. The acceptable values for this parameter are: Active or Inactive.

Type:String
Accepted values:Active, Inactive
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-T1

Specifies the lease renewal time. The DHCP client is expected to use a unicast message to renew the lease at the time specifies by this parameter value from the same DHCP server service from which DHCP client had initially obtained the lease. This parameter value should be less than the T2 and PreferredLifetime parameter values for the scope.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-T2

Specifies the lease rebind time. The client is expected to use a multi-cast message to renew the lease at the time equal to this parameter value from any DHCP server service if the renewal attempt at time specified by the T1 parameter fails.

This parameter value should be greater than the T1 parameter value and less than the PreferredLifetime parameter value.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ValidLifeTime

Specifies the valid life time of the IPv6 address leased by the DHCP server service.

This parameter value should be same or greater than the PreferredLifetime parameter value.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.